On Fri, Dec 31, 2004 at 02:23:30PM -0700, Grant Grundler wrote:
> Yes, STI should continue to work with 2.6.x kernels.
> This sounds like a bug.
I fetched palinux-b180-defconfig-2.6.10-pa2_0-2_all.deb from
http://cvs.parisc-linux.org/download/linux-2.6/autobuild/b180_defconfig/
and build a nice vmlinux-2.6.10-pa2.
This gives me nice console output on booting, so there is definitely
something wrong with Debian's kernel-image-2.6.8-1-32.
Howver, now comes the bad news.
=======================================================================
Command line for kernel: 'root=/dev/sda2 HOME=/ max_loop=64 console=ttyS0 TERM=vt102 palo_kernel=2/boot/vmlinux'
Selected kernel: /boot/vmlinux from partition 2
ELF32 executable
Entry 00100000 first 00100000 n 1
Segment 0 load 00100000 size 3514501 mediaptr 0x1000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
CPU'
CPU(s): 1 x PA8200 (PCX-U+) at 236.000000 MHz
Setting cache flush threshold to 40 (1 CPUs online)
Lasi version 0 at 0xffd00000 found.
Dino [8/0] version 3.1 found at 0xf2000000
Cujo version 2.0 found at 0xf1000000
SCSI subsystem initialized
unwind_init: start = 0x1034aea0, end = 0x1036ed70, entries = 9197
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
Soft power switch enabled, polling @ 0xf0140000.
STI GSC/PCI core graphics driver Version 0.9a
STI PCI graphic ROM found at f1e00000 (2048 kB), fb at f6000000 (32 MB)
id 2fc1066b-9a02587, conforms to spec rev. 8.09
graphics card name: HPA4554A
sticon: Initializing STI text console.
Console: switching to colour STI console 160x64
stifb: 'HPA4554A' (id: 0x2fc1066b) not supported.
lp: driver loaded but no devices found
Generic RTC Driver v1.07
serio: GSC PS/2 keyboard port at 0xffd08000 irq 69 @ 8:16:7
serio: GSC PS/2 mouse port at 0xffd08100 irq 69 @ 8:16:8
Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled
ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xf2003800 (irq = 106) is a 16550A
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 64 devices)
PPP generic driver version 2.4.2
Linux Tulip driver version 1.1.13 (May 11, 2002)
Backtrace:
[<10202ea4>] pci_device_probe_static+0x60/0x78
[<10202ed8>] __pci_device_probe+0x1c/0x34
[<10202f1c>] pci_device_probe+0x2c/0x58
[<1023dbe0>] driver_probe_device+0x48/0x90
[<1023dd5c>] driver_attach+0x80/0xa8
[<1023e2e0>] bus_add_driver+0xb8/0xe0
[<1023e878>] driver_register+0x44/0x50
[<102031f8>] pci_register_driver+0x54/0x60
[<103d189c>] do_initcalls+0x8c/0x138
[<10103760>] init+0x38/0x104
[<1010bc5c>] ret_from_kernel_thread+0x1c/0x24
Kernel Fault: Code=26 regs=11474480 (Addr=00000004)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001111 Not tainted
r00-03 00000000 10460010 103eb100 0000000c
r04-07 103915cc 10391590 ffffffed 11750000
r08-11 11462800 00000003 10313800 11750220
r12-15 10332800 10391810 80000080 11462848
r16-19 f000167c 00000060 f00001f0 00000000
r20-23 00000030 0000000e f2000000 00000020
r24-27 11750230 00000a00 11462848 1036f010
r28-31 00000000 11474488 11474480 1020119c
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 103eb120 103eb124
IIR: 0e681096 ISR: 00000000 IOR: 00000004
CPU: 0 CR30: 11474000 CR31: 103c8000
ORIG_R28: 1048a1a0
IAOQ[0]: tulip_init_one+0x23c/0xdc0
IAOQ[1]: tulip_init_one+0x240/0xdc0
RP(r2): tulip_init_one+0x21c/0xdc0
Kernel panic - not syncing: Kernel Fault
=======================================================================
2.4.27-pa4 runs fine with the Tulip NIC.
$ grep -i tulip /var/log/dmesg
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1000 status 782d advertising 0061.
eth0: Digital DS21143 Tulip rev 48 at 0xff00, 00:60:B0:EA:C8:DE, IRQ 96.
$ /usr/bin/lspci
0000:00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
0000:01:04.0 Display controller: Hewlett-Packard Company Visualize FX4 (rev 02)
Alright. Where is the right place to send this?
--
This ain't no sig.
Attachment:
pgpmPivMyajsX.pgp
Description: PGP signature