Bug#942193: marked as done (dwz: dh_dwz freecad build regression: write_die: Assertion `value && refdcu->cu_kind != CU_ALT' failed.)
Your message dated Thu, 07 Nov 2019 13:33:55 +0000
with message-id <E1iShv9-000IX5-9c@fasolo.debian.org>
and subject line Bug#942193: fixed in dwz 0.13-2
has caused the Debian Bug report #942193,
regarding dwz: dh_dwz freecad build regression: write_die: Assertion `value && refdcu->cu_kind != CU_ALT' failed.
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
942193: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=942193
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: dwz: dh_dwz freecad build regression: write_die: Assertion `value && refdcu->cu_kind != CU_ALT' failed.
- From: Kurt Kremitzki <kurt@kwk.systems>
- Date: Fri, 11 Oct 2019 19:11:34 -0500
- Message-id: <157083909442.31097.13483118547244088493.reportbug@rgb.home.kwk.systems>
Package: dwz
Version: 0.12-3
Severity: critical
Justification: breaks unrelated software
Dear Maintainer,
I'm not certain if critical is the correct severity, but it seems dwz is
causing a build regression in freecad. As part of Python 3 removal, I
dropped the Python 2 build and packages in a new upload This should
have been uneventful, but somehow, the builds for i386, mipsel, and
s390x are all failing with essentially the same error, as follows:
```
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_dwz -a -O--buildsystem=cmake
dwz: /build/dwz-aS1MPf/dwz-0.13/dwz.c:9310: write_die: Assertion `value && refdcu->cu_kind != CU_ALT' failed.
dh_dwz: dwz -mdebian/libfreecad-python3-0.18/usr/lib/debug/.dwz/i386-linux-gnu/libfreecad-python3-0.18.debug -M/usr/lib/debug/.dwz/i386-linux-gnu/libfreecad-python3-0.18.debug -- debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/DraftUtils.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Drawing.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/DrawingGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Fem.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/FemGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/FreeCAD.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/FreeCADGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Image.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/ImageGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Import.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/ImportGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Inspection.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/InspectionGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Measure.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Mesh.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/MeshGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/MeshPart.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/MeshPartGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Part.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/PartDesignGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/PartGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Path.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/PathGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/PathSimulator.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Points.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/PointsGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/QtUnitGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Raytracing.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/RaytracingGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/ReverseEngineering.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/ReverseEngineeringGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Robot.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/RobotGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Sketcher.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/SketcherGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Spreadsheet.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/SpreadsheetGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Start.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/StartGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Surface.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/SurfaceGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/TechDraw.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/TechDrawGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/Web.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/WebGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/_PartDesign.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/area.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libDriver.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libDriverDAT.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libDriverSTL.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libDriverUNV.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libFreeCADApp.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libFreeCADBase.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libFreeCADGui.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libMEFISTO2.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libSMDS.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libSMESH.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libSMESHDS.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libStdMeshers.so debian/libfreecad-python3-0.18/usr/lib/freecad-python3/lib/libarea-native.so died with signal 6
make: *** [debian/rules:3: binary-arch] Error 255
dpkg-buildpackage: error: fakeroot debian/rules binary-arch subprocess returned exit status 2
```
This has caused FreeCAD to drop out of testing.
-- System Information:
Debian Release: 10.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.2.0-0.bpo.2-amd64 (SMP w/12 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE= (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages dwz depends on:
ii libc6 2.28-10
ii libelf1 0.176-1.1
dwz recommends no packages.
dwz suggests no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: dwz
Source-Version: 0.13-2
We believe that the bug you reported is fixed in the latest version of
dwz, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 942193@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Matthias Klose <doko@debian.org> (supplier of updated dwz package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Thu, 07 Nov 2019 14:01:46 +0100
Source: dwz
Architecture: source
Version: 0.13-2
Distribution: unstable
Urgency: medium
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Changed-By: Matthias Klose <doko@debian.org>
Closes: 942193
Changes:
dwz (0.13-2) unstable; urgency=medium
.
* Apply updates from the trunk.
- Fix PR 2509, taken from the trunk. Closes: #942193.
* Bump standards version.
Checksums-Sha1:
c07f818afefa3d03a598f05318bdf61b7b134162 1812 dwz_0.13-2.dsc
3a1ca20745c7ed09b33c89eb9f8f09d559ec43fd 21196 dwz_0.13-2.debian.tar.xz
1bc571b5e11904478228cc454eac0c6fcd2f1a94 6261 dwz_0.13-2_source.buildinfo
Checksums-Sha256:
6e0ae3c60333f7f8d4c051f9c027d830cb13adfde20b1cf9412a18062328e90f 1812 dwz_0.13-2.dsc
a506e1c7104c4db45e45c9ef8988a0930fc4a4f90d29be177cba08061f163f41 21196 dwz_0.13-2.debian.tar.xz
e9e767fe2ccf3e2ce84b30af058ec765efa1ae90a01cf207fb40088c5a834e0c 6261 dwz_0.13-2_source.buildinfo
Files:
cc0f5611c9d10e165bab2b03c25727ae 1812 devel optional dwz_0.13-2.dsc
d0739d744ac72c8e4027844e4b412aa1 21196 devel optional dwz_0.13-2.debian.tar.xz
36e47b72cdff0ada123d4237e8718b69 6261 devel optional dwz_0.13-2_source.buildinfo
-----BEGIN PGP SIGNATURE-----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=8um/
-----END PGP SIGNATURE-----
--- End Message ---
Reply to: