Hi,
I am building a Jessie based rootfs for an embedded device using multistrap and it has been working just fine. Since the release of Stretch is at hand, I decided to simply point the multistrap config to Stretch and start testing it. However, the boot process stop with the
output: <snip> [ 1.388662] Waiting for root device /dev/mmcblk0p1... [ 1.392529] mmc0: new high speed MMC card at address 0001 [ 1.393250] mmcblk0: mmc0:0001 MMC02G 1.79 GiB
[ 1.393488] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB [ 1.393726] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB [ 1.393962] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB [ 1.409666] mmcblk0: p1 p2 p3 p4 [ 1.425712] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 1.434607] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 1.960719] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.968850] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 1.976599] devtmpfs: mounted [ 1.983105] Freeing unused kernel memory: 2048K (80a00000 - 80c00000) sh: cannot set terminal process group (-1): Inappropriate ioctl for device sh: no job control in this shell sh-4.4# My uboot “bootargs” are: console=ttyS1,115200 root=/dev/mmcblk0p1 rootwait rw At some point, trying to get it to work, I also got the error” “Starting init: /etc/init exists but couldn't execute it (error -13)” Just before the “sh: “ prompt in the above output. I am unable to get information on error “13”. Any suggestions? And thanks for a great tool and distro. Regards, LJB |