[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#305426: marked as done (Fails to detect monitor and graphics card)



Your message dated Wed, 25 Jun 2008 17:47:21 +0000
with message-id <E1KBZ5V-0007bI-8K@ries.debian.org>
and subject line Bug#305426: fixed in xdebconfigurator 1.34
has caused the Debian Bug report #305426,
regarding Fails to detect monitor and graphics card
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
305426: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=305426
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: xdebconfigurator
Version: 1.14
Severity: important

xdebconfigurator fails to detect both the graphics card and the monitor type.

xdebconfigurator log : 

/usr/sbin/ddcprobe NOT found!
/usr/sbin/hwinfo NOT found!
/sbin/discover NOT found!
/usr/sbin/detect NOT found!
/usr/bin/mdetect NOT found!
VIDEO CARD: 1002:5d44 vendor|unknown unknown device
VIDEO CARD DEVICE: 5d44
VIDEO CARD VENDOR: 1002
VIDEO DRIVER: 
VIDEO DRIVER SRC: identifier
VIDEO MEMORY: 
POSSIBLE XSERVER: 
XSERVER 3: 
XSERVER 4: 
DEBIAN PACKAGE: 
MOUSE DEVICE: /dev/input/mice
MOUSE PROTOCOL: ImPS/2
MOUSE WHEEL: 0
KEYBOARD RULES: xfree86
MONITOR: Xdebc Monitor
MONITOR ID: 
SUGGESTED METHOD: Simple
MONITOR SIZE: 15 inches (380 mm)
MONITOR HOR SYNC: 28-50
MONITOR VER REFR: 43-75
MONITOR MODES: 1152x864, 1024x768, 800x600, 640x480
MONITOR MODE: 1024x768 @ 70Hz
MONITOR DEFAULT DEPTH: 16
Failed to determine video card driver or xserver at /usr/sbin/xdebconfigurator line 1192.

cpuinfo :

processor	: 0
cpu		: 7447/7457, altivec supported
clock		: 999MHz
revision	: 1.1 (pvr 8002 0101)
bogomips	: 665.60
machine		: CHRP Pegasos2

lspci :


0000:00:00.0 Host bridge: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (rev 03)
0000:00:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
0000:00:0c.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
0000:00:0c.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:0c.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e)
0000:00:0c.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e)
0000:00:0c.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
0000:00:0c.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40)
0000:00:0c.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 20)
0000:00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
0001:01:00.0 Host bridge: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (rev 03)
0001:01:08.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
0001:01:08.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)

Graphics board is a Radeon 9200


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.8-pegasos
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages xdebconfigurator depends on:
ii  debconf [debconf-2.0]         1.4.30.11  Debian configuration management sy
ii  discover                      2.0.6-3    hardware identification system
ii  kudzu                         1.1.67-1   The Red Hat Linux hardware probing
ii  perl-modules                  5.8.4-5    Core Perl modules

-- debconf information:
  base-config/menu/xdebconfigurator:
  xdebconfigurator/generate-at-boot: false


--- End Message ---
--- Begin Message ---
Source: xdebconfigurator
Source-Version: 1.34

We believe that the bug you reported is fixed in the latest version of
xdebconfigurator, which is due to be installed in the Debian FTP archive:

xdebconfigurator_1.34.dsc
  to pool/main/x/xdebconfigurator/xdebconfigurator_1.34.dsc
xdebconfigurator_1.34.tar.gz
  to pool/main/x/xdebconfigurator/xdebconfigurator_1.34.tar.gz
xdebconfigurator_1.34_all.deb
  to pool/main/x/xdebconfigurator/xdebconfigurator_1.34_all.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 305426@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Petter Reinholdtsen <pere@debian.org> (supplier of updated xdebconfigurator package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Wed, 25 Jun 2008 19:32:45 +0200
Source: xdebconfigurator
Binary: xdebconfigurator
Architecture: source all
Version: 1.34
Distribution: unstable
Urgency: low
Maintainer: Debian Edu Developers <debian-edu@lists.debian.org>
Changed-By: Petter Reinholdtsen <pere@debian.org>
Description: 
 xdebconfigurator - A script used with debconf to autoconfigure xserver-xorg
Closes: 286668 305423 305426 418746 486061
Changes: 
 xdebconfigurator (1.34) unstable; urgency=low
 .
   * Rewrite how ddcprobe output is processed, to handle all listed
     resolutions and fetch monitor frequence.
   * Add example output from ddcprobe on a few machines.
   * Add support for xresprobe, and prefer it over ddcprobe.  Recommend
     it instead of read-edid (Closes: #286668, #305423, #305426,
     #418746).
   * Rewrite handling of the monitor database
     (/usr/share/hwdata/MonitorsDB), to use the values there if the
     eisa ID is there.  This allow us to override monitors with
     incorrect DDC information.
   * Start on our own MonitorsDB file, to allow us to include our own
     override values, and also use a file in /etc/ for site specific
     overrides.
   * Remove obsolete base-config fragments.
   * Updated standards-version to 3.8.0.
   * Avoid bashism in init.d script (Closes: #486061).
Files: 
 d82d7124cd0762f5fd559b1e3f4a9d60 732 x11 optional xdebconfigurator_1.34.dsc
 b58d3b916f0eabe55a75c37f7f189994 32799 x11 optional xdebconfigurator_1.34.tar.gz
 4f0fa0839bfe244fee6d1225902d0ea6 28066 x11 optional xdebconfigurator_1.34_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFIYoJj20zMSyow1ykRAsAfAKCzGcTyy1r8h6FGBPSYPr+Z/qO31ACg6XuR
dbWYFvwdJdzSHwZePWGZp4o=
=oR5e
-----END PGP SIGNATURE-----



--- End Message ---

Reply to: