Re: Ltsp Diskless Workstation (Low Fat Client)-questions
>> Also the server is very slow: it takes 6 minutes to boot and it
>> doens't show the splashscreen.
> It looks like you changed the ip-adress of the server, without updating
> dns and other services accordingly.
No, I didn't. I never touched the IP addresses.
Not only, the server has been slow just after the installation.
In my first installation it became slow later (without modify the IP addresses).
Actualy I'm workin on a single partition ext3 of about 15 Gb and 600M of swap.
>> How did you try to do this. To me, it looks like you had only one
>> network where you can boot the diskless clients. did you change eth0 on
>> your "server" to be 192.168.0.254"
No, I didn't change anything.
I have a switch for the 10.0.2.0 netowk. When I whant to test a client
like LTSP client, I unplug the ethernet cable coming from the switch
and then I plug a cross cable coming from eth1.
When I wrote "i tried to use both the clients like ltsp client" I
didn't specify "before one, after the ather".
>> I'm testing the diskless modality with a laptop (pentium 4 3,4Ghz
>> 512Mb RAM) and a desktop (pentium 3 900Mhz, 312Mb RAM).
>> The laptio takes 44 second only to boot and it alway show the splashscreen;
>> the desktop takes 10 minutes to boot and is not showing the splascreen.
> I would have taken a look at the nic of the desktop.
what do you mean exatly? I know the ethernet card has no problem.
May I report same log file? If yes, wich one?
Reply to: