[Bug 484] Unable to install on Adaptec 2100S raidcard when in Fujitsu Siemens TX150.
http://bugs.skolelinux.no/show_bug.cgi?id=484
------- Additional Comments From olea@skolelinux.no 2007-06-19 14:31 -------
tspserver00:~# /usr/share/bug/discover1-data 3>&1
lspci:
00:00.0 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
[1166:0014] (rev 33)
00:00.1 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014]
00:00.2 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset) [1166:0014]
00:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27)
00:05.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet [14e4:16a7] (rev 02)
00:08.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 74)
00:0f.0 Host bridge [0600]: Broadcom CSB6 South Bridge [1166:0203] (rev a0)
00:0f.1 IDE interface [0101]: Broadcom CSB6 RAID/IDE Controller [1166:0213] (rev a0)
00:0f.2 USB Controller [0c03]: Broadcom CSB6 OHCI USB Controller [1166:0221]
(rev 05)
00:0f.3 ISA bridge [0601]: Broadcom GCLE-2 Host Bridge [1166:0227]
00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
02:09.0 PCI bridge [0604]: Adaptec (formerly DPT) PCI Bridge [1044:a500] (rev 02)
02:09.1 I2O [0e00]: Adaptec (formerly DPT) SmartRAID V Controller [1044:a501]
(rev 02)
lsusb:
Bus 001 Device 001: ID 0000:0000
discover:
:Broadcom CMIC-LE Host Bridge (GC-LE chipset)
:Broadcom CMIC-LE Host Bridge (GC-LE chipset)
:Broadcom CMIC-LE Host Bridge (GC-LE chipset)
i2c-piix4:Broadcom CSB6 South Bridge
:Broadcom GCLE-2 Host Bridge
:Broadcom CIOB-X2 PCI-X I/O Bridge
:Broadcom CIOB-X2 PCI-X I/O Bridge
:Adaptec (formerly DPT) PCI Bridge
:Unknown HL-DT-STDVD-ROM GDR8162B
tg3:Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet
3c59x:3Com Corporation 3c905C-TX/TX-M [Tornado]
serverworks:Broadcom CSB6 RAID/IDE Controller
dpt_i2o:Adaptec (formerly DPT) SmartRAID V Controller
ide-scsi:Linux IDE-SCSI emulation layer
ohci-hcd:Broadcom CSB6 OHCI USB Controller
:ATI Technologies Inc Rage XL
:ADAPTEC RAID-1
loaded modules:
14e4:16a7 tg3
10b7:9200 3c59x
1166:0203 i2c_piix4
1166:0213 serverworks
1166:0221 ohci_hcd
X setting:
xserver-xorg xserver-xorg/config/device/driver select ati
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
Reply to: