Re: guterslohn network address range
On Fre, 08 Jul 2005, Geert Stappers wrote:
> > > yes, indeed.
> > > So I should prepare _two_ routers. :-(
> > >
> > > I think there are other possiblities.
> > > Which IP-networks are available on the GUT ethernet backbone?
> > If to router runs Linux, its also possible to use the NETMAP module, which
> > can map a complete Subnet to an other IP address range, e.g.
> > 10.0.2.0/22 <-> 192.168.2.0/22
> > to MAP established by the module is bidirectional..
> > man iptables
> > NETMAP
> > This target allows you to statically map a whole network of addresses
> > onto another network of addresses. It can only be used from rules in the nat
> > table.
> > --to address[/mask]
> > Network address to map to. The resulting address will be
> > constructed in the following way: All 'one' bits in the mask are filled in
> > from the new `address'.
> > All bits that are zero in the mask are filled in from the
> > original address.
> Yes, but it can't solve a 10.0.2.0/22 <-> 10.0.2.0/22 situation.
sure it can, just map both or one network to an other address space.
after that normal routing should do
> Meanwhile I know there is a "guest network" 192.168.100.0/24 avaibele
> at the Guterloh ethernetsegment.
> Something else:
> My incoming E-mail was broken last night ( 23:00 - 10:15 )
> I could have missed your E-mails in that window.
> All should be working again and this E-mail is to verify it.
Dipl.-Inf. Univ. Florian Reitmeir http://net.multi24.com/
Josef-Schweinester-Str.1 Tel: +43 526 266166
6412 St. Georgen / Austria Fax: +43 526 266166 -10