RE: Transfer von Daten nach Plattenwechsel
> -----Original Message-----
> From: user-bounces@skolelinux.de
> [mailto:user-bounces@skolelinux.de] On Behalf Of Ralf Gesel|ensetter
> Sent: Tuesday, January 04, 2005 10:50 PM
> To: Jürgen Leibner; user@skolelinux.de
> Subject: Re: Transfer von Daten nach Plattenwechsel
>
>
> Am Dienstag, 4. Januar 2005 22:20 schrieb Jan-Benedict Glaw:
> > 1. Sourcen besorgen:
>
> Hi,
>
> eigentlich müsste es auch mit apt-get gehen (-> ein neuerer
> 2.4er), 2.6
> ist immer so ne Sache...:
>
> > We recommend that you upgrade your kernel packages to the
> new 2.4.27
> > version built for Debian.
Hat leider nicht geholfen :-(
Gleiches Verhalten und Reaktion!
Anbei die Ausgabe von dmesg mit dem Ooops: 0000
Gehe Morgen dann die Anleitung von Jan-Benedict durch.
Vielleicht hilft das ja.
(Aus alte Werbung (Togal): "Wir wissen nicht was dieser freundliche
Hacker empfiehlt, wir empfehlen ....")
Erstmal vielen Dank.
Mit freundlichen Gruessen,
Juergen Leibner
--
(Aus alte Werbung (Togal): "Wir wissen nicht was dieser freundliche
Hacker empfiehlt, wir empfehlen ....")
--
Jürgen Leibner juergen.leibner@t-online.de
Tel 0521-8949019
--
Diese Mail wurde durch neueste Virenscanner mit den aktuellsten
Signaturen geprüft und ist bestmöglich virenfrei!
Linux version 2.4.27-1-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Wed Dec 1 19:43:08 JST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000013fec000 (usable)
BIOS-e820: 0000000013fec000 - 0000000013fef000 (ACPI data)
BIOS-e820: 0000000013fef000 - 0000000013fff000 (reserved)
BIOS-e820: 0000000013fff000 - 0000000014000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
319MB LOWMEM available.
On node 0 totalpages: 81900
zone(0): 4096 pages.
zone(1): 77804 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f7280
ACPI: RSDT (v001 ASUS CUV4X_E 0x30303031 MSFT 0x31313031) @ 0x13fec000
ACPI: FADT (v001 ASUS CUV4X_E 0x30303031 MSFT 0x31313031) @ 0x13fec080
ACPI: BOOT (v001 ASUS CUV4X_E 0x30303031 MSFT 0x31313031) @ 0x13fec040
ACPI: DSDT (v001 ASUS CUV4X_E 0x00001000 MSFT 0x0100000b) @ 0x00000000
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 866.452 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1723.59 BogoMIPS
Memory: 318328k/327600k available (1068k kernel code, 8888k reserved, 458k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 866.4464 MHz.
..... host bus clock speed is 133.2992 MHz.
cpu: 0, clocks: 1332992, slice: 666496
CPU0<T0:1332992,T1:666496,D:0,S:666496,C:1332992>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf0cd0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3444 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
Freeing initrd memory: 3444k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD800BB-50FRA0, ATA DISK drive
blk: queue d482bba0, I/O limit 4095Mb (mask 0xffffffff)
hdc: GCD-R580B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
hdc: attached ide-cdrom driver.
hdc: ATAPI 8X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
LVM version 1.0.8(17/11/2003) module loaded
loop: loaded (max 8 devices)
inserting floppy driver for 2.4.27-1-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,0), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 393208k swap-space (priority -1)
parport0: PC-style at 0x3bc [PCSPP]
parport_pc: Via 686A parallel port: io=0x3BC
lp0: using parport0 (polling).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 32M @ 0xfc000000
Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Copyright (c) 2004 Intel Corporation
PCI: Found IRQ 10 for device 00:06.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
PCI: Enabling device 00:09.0 (0004 -> 0005)
PCI: Assigned IRQ 5 for device 00:09.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xa400. Vers LK1.1.18-ac
00:60:08:4e:4c:d7, IRQ 5
product code 4b4b rev 00.0 date 07-31-97
Internal config register is 16302d8, transceivers 0xe040.
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786f.
Enabling bus-master transmits and whole-frame receives.
00:09.0: scatter/gather enabled. h/w checksums disabled
eth1: Dropping NETIF_F_SG since no checksum feature.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
e100: eth0 NIC Link is Up 100 Mbps Full duplex
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:47:10 Dec 1 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2559 buckets, 20472 max) - 288 bytes per conntrack
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:47:10 Dec 1 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Unable to handle kernel NULL pointer dereference at virtual address 00000012
printing eip:
c0124ec3
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0124ec3>] Not tainted
EFLAGS: 00010206
eax: d1e9fa74 ebx: 0000000a ecx: c106149c edx: 0000011d
esi: 0000011d edi: d1e9fa74 ebp: c106149c esp: ce781ef0
ds: 0018 es: 0018 ss: 0018
Process smbd (pid: 885, stackpage=ce781000)
Stack: 00000000 0000011d fffffff4 4041d04c c012722e d1e9fa74 0000011d d3ba9d4c
00000002 d3ba9d4c 00000000 00000000 00001000 00000000 d1e9f9c0 d1e9fa74
00000000 0011d000 00000000 cc000000 d1e9f9c0 d1e9fa2c cbdf3c10 d1e9f9c0
Call Trace: [<c012722e>] [<c01276e9>] [<d488e861>] [<c0131b1c>] [<c01081fb>]
Code: 39 7b 08 75 f4 39 73 0c 75 ef ff 43 14 0f ba 6b 18 00 19 c0
Reply to: