Re: LSB init scripts and multiple lines of output

[Daniel Jacobowitz <dan@debian.org>]

On Thu, Jun 01, 2006 at 06:51:54PM +0200, martin f krafft wrote:
> In my ideal world, this is what it would look like:
> 
> Starting RAID devices ...
>   /dev/md0 has been started with 3 drives.
>   /dev/md1 has been started with 3 drives.
>   /dev/md2 assembled from 2 drives - need all 3 to start it
>   /dev/md3 assembled from 1 drive - not enough to start the array.
>   /dev/md4 has been started with 3 drives.
> ... done assembling RAID devices: failed.

Have you considered:

Starting RAID device md0 ... 3 drives, done
Starting RAID device md1 ... 3 drives, done
Starting RAID device md2 ... 2/3 drives, degraded
Starting RAID device md3 ... 1/3 drives, failed
Starting RAID device md4 ... 3 drives, done

-- 
Daniel Jacobowitz
CodeSourcery