Serious kernel problems on new i386 hardware
Hi,
I've got a new Dell machine which I was able to install with Kernel 2.4.27.
It has a SATA drive but I disabled SATA in BIOS according to the manuals.
All I write in the following has this SATA disabled BIOS setting.
As I said kernel 2.4.27 works fine. I attach a dmesg and syslog to this
mail.
I tried to upgrade to a 2.6.x kernel but failed always with kernel_panic.
I tried 2.6.8, 2.6.8 and 2.6.10 (here -1-386 and -1-686 versions) and
all failed with the same result:
ERROR: Removing 'trm290': Device or resource busy
ERROR: Removing 'vis82cxxx': Device or resource busy
pivot_root: No such file or directory
/sbin/init: 432: cannot open dev/console: No such file
Kernel panic - not syncing: Attempt to kill init!
The third attachment is what I dumped manually from the screen (I left out
certain parts which I could send later on request). I regard it as a serious
bug but I'm not sure if this is a "mass bug filing" if all 2.6.x kernel-images
for i386 fail or how to handle this.
Any hint how to fix this?
Kind regards
Andreas.
--
http://fam-tille.deLinux version 2.4.27-1-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Wed Dec 1 19:43:08 JST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf686c00 (usable)
BIOS-e820: 00000000bf686c00 - 00000000bf688c00 (ACPI NVS)
BIOS-e820: 00000000bf688c00 - 00000000bf68ac00 (ACPI data)
BIOS-e820: 00000000bf68ac00 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 DELL ) @ 0x000fec00
ACPI: RSDT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcc04
ACPI: FADT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcc44
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd332b
ACPI: MADT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fccb8
ACPI: BOOT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcd2a
ACPI: ASF! (v016 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcd52
ACPI: MCFG (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcdb9
ACPI: HPET (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcdf7
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Unknown CPU [15:4] APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: Opti GX280 APIC at: 0xFEE00000
I/O APIC #8 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: root=/dev/hda3 ro
Initializing CPU#0
Detected 3192.166 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 6370.09 BogoMIPS
Memory: 901620k/917504k available (1068k kernel code, 15500k reserved, 458k data, 96k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: IRQ9 SCI: Level Trigger.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 8 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 8 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-13 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 50.
number of IO-APIC #8 registers: 24.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170020
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 001 01 1 1 0 1 0 1 1 A1
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 001 01 1 1 0 1 0 1 1 C1
15 001 01 1 1 0 1 0 1 1 C9
16 001 01 1 1 0 1 0 1 1 D1
17 001 01 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3192.0792 MHz.
..... host bus clock speed is 199.5048 MHz.
cpu: 0, clocks: 1995048, slice: 997524
CPU0<T0:1995040,T1:997504,D:12,S:997524,C:1995048>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb257, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2640] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 21
PCI->APIC IRQ transform: (B0,I29,P1) -> 22
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I29,P0) -> 21
PCI->APIC IRQ transform: (B0,I30,P0) -> 23
PCI->APIC IRQ transform: (B0,I31,P2) -> 20
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3696 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
Freeing initrd memory: 3696k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
hda: ST3160023AS, ATA DISK drive
hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
hdd: PHILIPS DVD+/-RW DVD8631, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 312500000 sectors (160000 MB) w/8192KiB Cache, CHS=19452/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 4883720k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v3.8 (July 14, 2004)
PCI: Setting latency timer of device 02:00.0 to 64
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:9d:16:55
eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:47:10 Dec 1 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 22
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff40, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xff20, IRQ 23
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
Intel 810 + AC97 Audio, version 1.01, 19:46:39 Dec 1 2004
PCI: Setting latency timer of device 00:1e.2 to 64
i810: Intel ICH4 found at IO 0xe8c0 and 0xec00, MEM 0xdfebfe00 and 0xdfebfd00, IRQ 23
i810: Intel ICH4 mmio at 0xf8882e00 and 0xf8b23d00
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
i810_rng: cannot disable RNG, aborting
i810_rng hardware driver 0.9.8 loaded
hw_random hardware driver 1.0.0 loaded
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: PCI device 8086:265c (Intel Corp.)
ehci_hcd 00:1d.7: irq 21, pci mem f8b30800
usb.c: new USB bus registered, assigned bus number 5
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 128 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 8 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb-uhci.c: interrupt, status 2, frame# 173
usb.c: error getting string descriptor 0 (error=-84)
usb.c: error getting string descriptor 0 (error=-84)
hub.c: connect-debounce failed, port 2 disabled
hub.c: new USB device 00:1d.7-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: USB disconnect on device 00:1d.1-2 address 2
hub.c: new USB device 00:1d.1-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb2:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Mar 10 13:54:06 wr-linux03 syslogd 1.4.1#16: restart.
Mar 10 13:54:06 wr-linux03 kernel: klogd 1.4.1#16, log source = /proc/kmsg started.
Mar 10 13:54:06 wr-linux03 kernel: Inspecting /boot/System.map-2.4.27-1-386
Mar 10 13:54:07 wr-linux03 kernel: Loaded 18315 symbols from /boot/System.map-2.4.27-1-386.
Mar 10 13:54:07 wr-linux03 kernel: Symbols match kernel version 2.4.27.
Mar 10 13:54:07 wr-linux03 kernel: Loaded 596 symbols from 24 modules.
Mar 10 13:54:07 wr-linux03 kernel: Linux version 2.4.27-1-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Wed Dec 1 19:43:08 JST 2004
Mar 10 13:54:07 wr-linux03 kernel: BIOS-provided physical RAM map:
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 0000000000100000 - 00000000bf686c00 (usable)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000bf686c00 - 00000000bf688c00 (ACPI NVS)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000bf688c00 - 00000000bf68ac00 (ACPI data)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000bf68ac00 - 00000000c0000000 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Mar 10 13:54:07 wr-linux03 kernel: Warning only 896MB will be used.
Mar 10 13:54:07 wr-linux03 kernel: Use a HIGHMEM enabled kernel.
Mar 10 13:54:07 wr-linux03 kernel: 896MB LOWMEM available.
Mar 10 13:54:07 wr-linux03 kernel: found SMP MP-table at 000fe710
Mar 10 13:54:07 wr-linux03 kernel: hm, page 000fe000 reserved twice.
Mar 10 13:54:07 wr-linux03 kernel: hm, page 000ff000 reserved twice.
Mar 10 13:54:07 wr-linux03 kernel: hm, page 000f0000 reserved twice.
Mar 10 13:54:07 wr-linux03 kernel: On node 0 totalpages: 229376
Mar 10 13:54:07 wr-linux03 kernel: zone(0): 4096 pages.
Mar 10 13:54:07 wr-linux03 kernel: zone(1): 225280 pages.
Mar 10 13:54:07 wr-linux03 kernel: zone(2): 0 pages.
Mar 10 13:54:07 wr-linux03 kernel: ACPI: RSDP (v000 DELL ) @ 0x000fec00
Mar 10 13:54:07 wr-linux03 kernel: ACPI: RSDT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcc04
Mar 10 13:54:07 wr-linux03 kernel: ACPI: FADT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcc44
Mar 10 13:54:07 wr-linux03 kernel: ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd332b
Mar 10 13:54:07 wr-linux03 kernel: ACPI: MADT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fccb8
Mar 10 13:54:07 wr-linux03 kernel: ACPI: BOOT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcd2a
Mar 10 13:54:07 wr-linux03 kernel: ACPI: ASF! (v016 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcd52
Mar 10 13:54:07 wr-linux03 kernel: ACPI: MCFG (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcdb9
Mar 10 13:54:07 wr-linux03 kernel: ACPI: HPET (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcdf7
Mar 10 13:54:07 wr-linux03 kernel: ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
Mar 10 13:54:07 wr-linux03 kernel: ACPI: Local APIC address 0xfee00000
Mar 10 13:54:07 wr-linux03 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 10 13:54:07 wr-linux03 kernel: Processor #0 Unknown CPU [15:4] APIC version 20
Mar 10 13:54:07 wr-linux03 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Mar 10 13:54:07 wr-linux03 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
Mar 10 13:54:07 wr-linux03 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
Mar 10 13:54:07 wr-linux03 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Mar 10 13:54:07 wr-linux03 kernel: Using ACPI for processor (LAPIC) configuration information
Mar 10 13:54:07 wr-linux03 kernel: Intel MultiProcessor Specification v1.4
Mar 10 13:54:07 wr-linux03 kernel: Virtual Wire compatibility mode.
Mar 10 13:54:07 wr-linux03 kernel: OEM ID: DELL Product ID: Opti GX280 APIC at: 0xFEE00000
Mar 10 13:54:07 wr-linux03 kernel: I/O APIC #8 Version 32 at 0xFEC00000.
Mar 10 13:54:07 wr-linux03 kernel: Enabling APIC mode: Flat.^IUsing 1 I/O APICs
Mar 10 13:54:07 wr-linux03 kernel: Processors: 1
Mar 10 13:54:07 wr-linux03 kernel: Kernel command line: root=/dev/hda3 ro
Mar 10 13:54:07 wr-linux03 kernel: Initializing CPU#0
Mar 10 13:54:07 wr-linux03 kernel: Detected 3192.121 MHz processor.
Mar 10 13:54:07 wr-linux03 kernel: Console: colour VGA+ 80x25
Mar 10 13:54:07 wr-linux03 kernel: Calibrating delay loop... 6370.09 BogoMIPS
Mar 10 13:54:07 wr-linux03 kernel: Memory: 901620k/917504k available (1068k kernel code, 15500k reserved, 458k data, 96k init, 0k highmem)
Mar 10 13:54:07 wr-linux03 kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 10 13:54:07 wr-linux03 kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mar 10 13:54:07 wr-linux03 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 10 13:54:07 wr-linux03 kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 10 13:54:07 wr-linux03 kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Mar 10 13:54:07 wr-linux03 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Mar 10 13:54:07 wr-linux03 kernel: CPU: L2 cache: 1024K
Mar 10 13:54:07 wr-linux03 kernel: CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
Mar 10 13:54:07 wr-linux03 kernel: CPU: Common caps: bfebfbff 00000000 00000000 00000000
Mar 10 13:54:07 wr-linux03 kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
Mar 10 13:54:07 wr-linux03 kernel: Enabling fast FPU save and restore... done.
Mar 10 13:54:07 wr-linux03 kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 10 13:54:07 wr-linux03 kernel: Checking 'hlt' instruction... OK.
Mar 10 13:54:07 wr-linux03 kernel: Checking for popad bug... OK.
Mar 10 13:54:07 wr-linux03 kernel: ACPI: IRQ9 SCI: Level Trigger.
Mar 10 13:54:07 wr-linux03 kernel: POSIX conformance testing by UNIFIX
Mar 10 13:54:07 wr-linux03 kernel: enabled ExtINT on CPU#0
Mar 10 13:54:07 wr-linux03 kernel: ESR value before enabling vector: 00000040
Mar 10 13:54:07 wr-linux03 kernel: ESR value after enabling vector: 00000000
Mar 10 13:54:07 wr-linux03 kernel: ENABLING IO-APIC IRQs
Mar 10 13:54:07 wr-linux03 kernel: Setting 8 in the phys_id_present_map
Mar 10 13:54:07 wr-linux03 kernel: ...changing IO-APIC physical APIC ID to 8 ... ok.
Mar 10 13:54:07 wr-linux03 kernel: init IO_APIC IRQs
Mar 10 13:54:07 wr-linux03 kernel: IO-APIC (apicid-pin) 8-0, 8-13 not connected.
Mar 10 13:54:07 wr-linux03 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Mar 10 13:54:07 wr-linux03 kernel: number of MP IRQ sources: 50.
Mar 10 13:54:07 wr-linux03 kernel: number of IO-APIC #8 registers: 24.
Mar 10 13:54:07 wr-linux03 kernel: testing the IO APIC.......................
Mar 10 13:54:07 wr-linux03 kernel:
Mar 10 13:54:07 wr-linux03 kernel: IO APIC #8......
Mar 10 13:54:07 wr-linux03 kernel: .... register #00: 08000000
Mar 10 13:54:07 wr-linux03 kernel: ....... : physical APIC id: 08
Mar 10 13:54:07 wr-linux03 kernel: ....... : Delivery Type: 0
Mar 10 13:54:07 wr-linux03 kernel: ....... : LTS : 0
Mar 10 13:54:07 wr-linux03 kernel: .... register #01: 00170020
Mar 10 13:54:07 wr-linux03 kernel: ....... : max redirection entries: 0017
Mar 10 13:54:07 wr-linux03 kernel: ....... : PRQ implemented: 0
Mar 10 13:54:07 wr-linux03 kernel: ....... : IO APIC version: 0020
Mar 10 13:54:07 wr-linux03 kernel: .... IRQ redirection table:
Mar 10 13:54:07 wr-linux03 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Mar 10 13:54:07 wr-linux03 kernel: 00 000 00 1 0 0 0 0 0 0 00
Mar 10 13:54:07 wr-linux03 kernel: 01 001 01 0 0 0 0 0 1 1 39
Mar 10 13:54:07 wr-linux03 kernel: 02 001 01 0 0 0 0 0 1 1 31
Mar 10 13:54:07 wr-linux03 kernel: 03 001 01 0 0 0 0 0 1 1 41
Mar 10 13:54:07 wr-linux03 kernel: 04 001 01 0 0 0 0 0 1 1 49
Mar 10 13:54:07 wr-linux03 kernel: 05 001 01 0 0 0 0 0 1 1 51
Mar 10 13:54:07 wr-linux03 kernel: 06 001 01 0 0 0 0 0 1 1 59
Mar 10 13:54:07 wr-linux03 kernel: 07 001 01 0 0 0 0 0 1 1 61
Mar 10 13:54:07 wr-linux03 kernel: 08 001 01 0 0 0 0 0 1 1 69
Mar 10 13:54:07 wr-linux03 kernel: 09 001 01 0 0 0 0 0 1 1 71
Mar 10 13:54:07 wr-linux03 kernel: 0a 001 01 0 0 0 0 0 1 1 79
Mar 10 13:54:07 wr-linux03 kernel: 0b 001 01 0 0 0 0 0 1 1 81
Mar 10 13:54:07 wr-linux03 kernel: 0c 001 01 0 0 0 0 0 1 1 89
Mar 10 13:54:07 wr-linux03 kernel: 0d 000 00 1 0 0 0 0 0 0 00
Mar 10 13:54:07 wr-linux03 kernel: 0e 001 01 0 0 0 0 0 1 1 91
Mar 10 13:54:07 wr-linux03 kernel: 0f 001 01 0 0 0 0 0 1 1 99
Mar 10 13:54:07 wr-linux03 kernel: 10 001 01 1 1 0 1 0 1 1 A1
Mar 10 13:54:07 wr-linux03 kernel: 11 001 01 1 1 0 1 0 1 1 A9
Mar 10 13:54:07 wr-linux03 kernel: 12 001 01 1 1 0 1 0 1 1 B1
Mar 10 13:54:07 wr-linux03 kernel: 13 001 01 1 1 0 1 0 1 1 B9
Mar 10 13:54:07 wr-linux03 kernel: 14 001 01 1 1 0 1 0 1 1 C1
Mar 10 13:54:07 wr-linux03 kernel: 15 001 01 1 1 0 1 0 1 1 C9
Mar 10 13:54:07 wr-linux03 kernel: 16 001 01 1 1 0 1 0 1 1 D1
Mar 10 13:54:07 wr-linux03 kernel: 17 001 01 1 1 0 1 0 1 1 D9
Mar 10 13:54:07 wr-linux03 kernel: IRQ to pin mappings:
Mar 10 13:54:07 wr-linux03 kernel: IRQ0 -> 0:2
Mar 10 13:54:07 wr-linux03 kernel: IRQ1 -> 0:1
Mar 10 13:54:07 wr-linux03 kernel: IRQ3 -> 0:3
Mar 10 13:54:07 wr-linux03 kernel: IRQ4 -> 0:4
Mar 10 13:54:07 wr-linux03 kernel: IRQ5 -> 0:5
Mar 10 13:54:07 wr-linux03 kernel: IRQ6 -> 0:6
Mar 10 13:54:07 wr-linux03 kernel: IRQ7 -> 0:7
Mar 10 13:54:07 wr-linux03 kernel: IRQ8 -> 0:8
Mar 10 13:54:07 wr-linux03 kernel: IRQ9 -> 0:9
Mar 10 13:54:07 wr-linux03 kernel: IRQ10 -> 0:10
Mar 10 13:54:07 wr-linux03 kernel: IRQ11 -> 0:11
Mar 10 13:54:07 wr-linux03 kernel: IRQ12 -> 0:12
Mar 10 13:54:07 wr-linux03 kernel: IRQ14 -> 0:14
Mar 10 13:54:07 wr-linux03 kernel: IRQ15 -> 0:15
Mar 10 13:54:07 wr-linux03 kernel: IRQ16 -> 0:16
Mar 10 13:54:07 wr-linux03 kernel: IRQ17 -> 0:17
Mar 10 13:54:07 wr-linux03 kernel: IRQ18 -> 0:18
Mar 10 13:54:07 wr-linux03 kernel: IRQ19 -> 0:19
Mar 10 13:54:07 wr-linux03 kernel: IRQ20 -> 0:20
Mar 10 13:54:07 wr-linux03 kernel: IRQ21 -> 0:21
Mar 10 13:54:07 wr-linux03 kernel: IRQ22 -> 0:22
Mar 10 13:54:07 wr-linux03 kernel: IRQ23 -> 0:23
Mar 10 13:54:07 wr-linux03 kernel: .................................... done.
Mar 10 13:54:07 wr-linux03 kernel: Using local APIC timer interrupts.
Mar 10 13:54:07 wr-linux03 kernel: calibrating APIC timer ...
Mar 10 13:54:07 wr-linux03 kernel: ..... CPU clock speed is 3191.8772 MHz.
Mar 10 13:54:07 wr-linux03 kernel: ..... host bus clock speed is 199.4921 MHz.
Mar 10 13:54:07 wr-linux03 kernel: cpu: 0, clocks: 1994921, slice: 997460
Mar 10 13:54:07 wr-linux03 kernel: CPU0<T0:1994912,T1:997440,D:12,S:997460,C:1994921>
Mar 10 13:54:07 wr-linux03 kernel: ACPI: Subsystem revision 20040326
Mar 10 13:54:07 wr-linux03 kernel: ACPI: Interpreter disabled.
Mar 10 13:54:07 wr-linux03 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb257, last bus=4
Mar 10 13:54:07 wr-linux03 kernel: PCI: Using configuration type 1
Mar 10 13:54:07 wr-linux03 kernel: PCI: Probing PCI hardware
Mar 10 13:54:07 wr-linux03 kernel: PCI: ACPI tables contain no PCI IRQ routing entries
Mar 10 13:54:07 wr-linux03 kernel: PCI: Probing PCI hardware (bus 00)
Mar 10 13:54:07 wr-linux03 kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Mar 10 13:54:07 wr-linux03 kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Mar 10 13:54:07 wr-linux03 kernel: PCI: Using IRQ router PIIX/ICH [8086/2640] at 00:1f.0
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 21
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 22
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I29,P3) -> 23
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 21
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I30,P0) -> 23
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I31,P2) -> 20
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 17
Mar 10 13:54:07 wr-linux03 kernel: PCI->APIC IRQ transform: (B2,I0,P0) -> 16
Mar 10 13:54:07 wr-linux03 kernel: Linux NET4.0 for Linux 2.4
Mar 10 13:54:07 wr-linux03 kernel: Based upon Swansea University Computer Society NET3.039
Mar 10 13:54:07 wr-linux03 kernel: Initializing RT netlink socket
Mar 10 13:54:07 wr-linux03 kernel: Starting kswapd
Mar 10 13:54:07 wr-linux03 kernel: VFS: Disk quotas vdquot_6.5.1
Mar 10 13:54:07 wr-linux03 kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Mar 10 13:54:07 wr-linux03 kernel: devfs: boot_options: 0x0
Mar 10 13:54:07 wr-linux03 kernel: pty: 256 Unix98 ptys configured
Mar 10 13:54:07 wr-linux03 kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Mar 10 13:54:07 wr-linux03 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Mar 10 13:54:07 wr-linux03 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Mar 10 13:54:07 wr-linux03 kernel: COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
Mar 10 13:54:07 wr-linux03 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Mar 10 13:54:07 wr-linux03 kernel: Initializing Cryptographic API
Mar 10 13:54:07 wr-linux03 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 10 13:54:07 wr-linux03 kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Mar 10 13:54:07 wr-linux03 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Mar 10 13:54:07 wr-linux03 kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 10 13:54:07 wr-linux03 kernel: RAMDISK: cramfs filesystem found at block 0
Mar 10 13:54:07 wr-linux03 kernel: RAMDISK: Loading 3696 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^Hdone.
Mar 10 13:54:07 wr-linux03 kernel: Freeing initrd memory: 3696k freed
Mar 10 13:54:07 wr-linux03 kernel: VFS: Mounted root (cramfs filesystem).
Mar 10 13:54:07 wr-linux03 kernel: Freeing unused kernel memory: 96k freed
Mar 10 13:54:07 wr-linux03 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 10 13:54:07 wr-linux03 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Mar 10 13:54:07 wr-linux03 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 10 13:54:07 wr-linux03 kernel: ide: late registration of driver.
Mar 10 13:54:07 wr-linux03 kernel: hda: ST3160023AS, ATA DISK drive
Mar 10 13:54:07 wr-linux03 kernel: hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
Mar 10 13:54:07 wr-linux03 kernel: hdd: PHILIPS DVD+/-RW DVD8631, ATAPI CD/DVD-ROM drive
Mar 10 13:54:07 wr-linux03 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 10 13:54:07 wr-linux03 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 10 13:54:07 wr-linux03 kernel: hda: attached ide-disk driver.
Mar 10 13:54:07 wr-linux03 kernel: hda: 312500000 sectors (160000 MB) w/8192KiB Cache, CHS=19452/255/63
Mar 10 13:54:07 wr-linux03 kernel: Partition check:
Mar 10 13:54:07 wr-linux03 kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 >
Mar 10 13:54:07 wr-linux03 kernel: Journalled Block Device driver loaded
Mar 10 13:54:07 wr-linux03 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 13:54:07 wr-linux03 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 13:54:07 wr-linux03 kernel: Adding Swap: 4883720k swap-space (priority -1)
Mar 10 13:54:07 wr-linux03 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Mar 10 13:54:07 wr-linux03 kernel: Real Time Clock Driver v1.10f
Mar 10 13:54:07 wr-linux03 kernel: hdc: attached ide-cdrom driver.
Mar 10 13:54:07 wr-linux03 kernel: hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
Mar 10 13:54:07 wr-linux03 kernel: Uniform CD-ROM driver Revision: 3.12
Mar 10 13:54:07 wr-linux03 kernel: hdd: attached ide-cdrom driver.
Mar 10 13:54:07 wr-linux03 kernel: hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Mar 10 13:54:07 wr-linux03 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 13:54:07 wr-linux03 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Mar 10 13:54:07 wr-linux03 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 13:54:07 wr-linux03 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 13:54:07 wr-linux03 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal
Mar 10 13:54:07 wr-linux03 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 13:54:07 wr-linux03 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 13:54:07 wr-linux03 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Mar 10 13:54:07 wr-linux03 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 13:54:07 wr-linux03 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 13:54:07 wr-linux03 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
Mar 10 13:54:07 wr-linux03 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 13:54:07 wr-linux03 kernel: kjournald starting. Commit interval 5 seconds
Mar 10 13:54:07 wr-linux03 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
Mar 10 13:54:07 wr-linux03 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 10 13:54:07 wr-linux03 kernel: tg3.c:v3.8 (July 14, 2004)
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 02:00.0 to 64
Mar 10 13:54:07 wr-linux03 kernel: eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:9d:16:55
Mar 10 13:54:07 wr-linux03 kernel: eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
Mar 10 13:54:07 wr-linux03 kernel: SCSI subsystem driver Revision: 1.00
Mar 10 13:54:07 wr-linux03 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 10 13:54:07 wr-linux03 kernel: usb.c: registered new driver usbdevfs
Mar 10 13:54:07 wr-linux03 kernel: usb.c: registered new driver hub
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: $Revision: 1.275 $ time 19:47:10 Dec 1 2004
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: High bandwidth mode enabled
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 00:1d.0 to 64
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 21
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: Detected 2 ports
Mar 10 13:54:07 wr-linux03 kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 10 13:54:07 wr-linux03 kernel: hub.c: USB hub found
Mar 10 13:54:07 wr-linux03 kernel: hub.c: 2 ports detected
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 00:1d.1 to 64
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 22
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: Detected 2 ports
Mar 10 13:54:07 wr-linux03 kernel: usb.c: new USB bus registered, assigned bus number 2
Mar 10 13:54:07 wr-linux03 kernel: hub.c: USB hub found
Mar 10 13:54:07 wr-linux03 kernel: hub.c: 2 ports detected
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 00:1d.2 to 64
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: USB UHCI at I/O 0xff40, IRQ 18
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: Detected 2 ports
Mar 10 13:54:07 wr-linux03 kernel: usb.c: new USB bus registered, assigned bus number 3
Mar 10 13:54:07 wr-linux03 kernel: hub.c: USB hub found
Mar 10 13:54:07 wr-linux03 kernel: hub.c: 2 ports detected
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 00:1d.3 to 64
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: USB UHCI at I/O 0xff20, IRQ 23
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: Detected 2 ports
Mar 10 13:54:07 wr-linux03 kernel: usb.c: new USB bus registered, assigned bus number 4
Mar 10 13:54:07 wr-linux03 kernel: hub.c: USB hub found
Mar 10 13:54:07 wr-linux03 kernel: hub.c: 2 ports detected
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Mar 10 13:54:07 wr-linux03 kernel: hub.c: new USB device 00:1d.1-2, assigned address 2
Mar 10 13:54:07 wr-linux03 kernel: usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
Mar 10 13:54:07 wr-linux03 kernel: Intel 810 + AC97 Audio, version 1.01, 19:46:39 Dec 1 2004
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 00:1e.2 to 64
Mar 10 13:54:07 wr-linux03 kernel: i810: Intel ICH4 found at IO 0xe8c0 and 0xec00, MEM 0xdfebfe00 and 0xdfebfd00, IRQ 23
Mar 10 13:54:07 wr-linux03 kernel: i810: Intel ICH4 mmio at 0xf8882e00 and 0xf8b23d00
Mar 10 13:54:07 wr-linux03 kernel: i810_audio: Primary codec has ID 0
Mar 10 13:54:07 wr-linux03 kernel: i810_audio: Audio Controller supports 6 channels.
Mar 10 13:54:07 wr-linux03 kernel: i810_audio: Defaulting to base 2 channel mode.
Mar 10 13:54:07 wr-linux03 kernel: i810_audio: Resetting connection 0
Mar 10 13:54:07 wr-linux03 kernel: i810_audio: Connection 0 with codec id 0
Mar 10 13:54:07 wr-linux03 kernel: ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
Mar 10 13:54:07 wr-linux03 kernel: i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Mar 10 13:54:07 wr-linux03 kernel: i810_rng: cannot disable RNG, aborting
Mar 10 13:54:07 wr-linux03 kernel: i810_rng hardware driver 0.9.8 loaded
Mar 10 13:54:07 wr-linux03 kernel: hw_random hardware driver 1.0.0 loaded
Mar 10 13:54:07 wr-linux03 kernel: PCI: Setting latency timer of device 00:1d.7 to 64
Mar 10 13:54:07 wr-linux03 kernel: ehci_hcd 00:1d.7: PCI device 8086:265c (Intel Corp.)
Mar 10 13:54:07 wr-linux03 kernel: ehci_hcd 00:1d.7: irq 21, pci mem f8b30800
Mar 10 13:54:07 wr-linux03 kernel: usb.c: new USB bus registered, assigned bus number 5
Mar 10 13:54:07 wr-linux03 kernel: ehci_hcd 00:1d.7: enabled 64bit PCI DMA
Mar 10 13:54:07 wr-linux03 kernel: PCI: cache line size of 128 is not supported by device 00:1d.7
Mar 10 13:54:07 wr-linux03 kernel: ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Mar 10 13:54:07 wr-linux03 kernel: hub.c: USB hub found
Mar 10 13:54:07 wr-linux03 kernel: hub.c: 8 ports detected
Mar 10 13:54:07 wr-linux03 kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Mar 10 13:54:07 wr-linux03 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 10 13:54:07 wr-linux03 kernel: shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Mar 10 13:54:07 wr-linux03 kernel: shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Mar 10 13:54:07 wr-linux03 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 10 13:54:07 wr-linux03 kernel: pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Mar 10 13:54:07 wr-linux03 kernel: pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
Mar 10 13:54:07 wr-linux03 kernel: usb-uhci.c: interrupt, status 2, frame# 198
Mar 10 13:54:07 wr-linux03 kernel: usb.c: error getting string descriptor 0 (error=-84)
Mar 10 13:54:07 wr-linux03 kernel: usb.c: error getting string descriptor 0 (error=-84)
Mar 10 13:54:07 wr-linux03 kernel: hub.c: connect-debounce failed, port 2 disabled
Mar 10 13:54:07 wr-linux03 kernel: hub.c: new USB device 00:1d.7-2, assigned address 2
Mar 10 13:54:07 wr-linux03 kernel: hub.c: USB hub found
Mar 10 13:54:07 wr-linux03 kernel: hub.c: 4 ports detected
Mar 10 13:54:07 wr-linux03 kernel: usb.c: USB disconnect on device 00:1d.1-2 address 2
Mar 10 13:54:07 wr-linux03 kernel: hub.c: new USB device 00:1d.1-2, assigned address 3
Mar 10 13:54:07 wr-linux03 kernel: usb.c: USB device 3 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
Mar 10 13:54:07 wr-linux03 kernel: usb.c: registered new driver hiddev
Mar 10 13:54:07 wr-linux03 kernel: usb.c: registered new driver hid
Mar 10 13:54:07 wr-linux03 kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb2:3.0
Mar 10 13:54:07 wr-linux03 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Mar 10 13:54:07 wr-linux03 kernel: hid-core.c: USB HID support drivers
Mar 10 13:54:07 wr-linux03 kernel: mice: PS/2 mouse device common for all mice
Mar 10 13:54:07 wr-linux03 kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Mar 10 13:54:07 wr-linux03 kernel: tg3: eth0: Flow control is on for TX and on for RX.
Mar 10 13:54:08 wr-linux03 lpd[1578]: restarted
Mar 10 13:54:09 wr-linux03 rpc.statd[1597]: Version 1.0.6 Starting
Mar 10 13:54:09 wr-linux03 rpc.statd[1597]: statd running as root. chown /var/lib/nfs/sm to choose different user
Mar 10 13:54:09 wr-linux03 /usr/sbin/cron[1602]: (CRON) INFO (pidfile fd = 3)
Mar 10 13:54:09 wr-linux03 /usr/sbin/cron[1603]: (CRON) STARTUP (fork ok)
Mar 10 13:54:09 wr-linux03 /usr/sbin/cron[1603]: (CRON) INFO (Running @reboot jobs)
Mar 10 13:54:11 wr-linux03 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lin[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPCI[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
APIC: HPET id: 0x9086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro pci=routeirq
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3102148k/3136024k available (1682k kernel code, 32836k reserved, 704k data, 172k init, 2218520k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 0ns tick, 3 64-bit timers
Using HPET for base-timer
Using HPET for gettimeofday
Detected 3192.470 MHz processor
Using hpet for high-res timesource
Security Framework v1.0.0 initialized
...
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI
PCI: Using ACPI for IRW routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behaviour. If this argument makes the device work again,
** please email the output of "lspci" tp bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0x800-0x85f could not be reserved
pnp: 00:00: ioport range 0xc00-0xc7f has been reserved
pnp: 00:00: ioport range 0x860-0x8ff has been reserved
pnp: 00:0b: ioport range 0x100-0x1fe has been reserved
pnp: 00:0b: ioport range 0x200-0x277 has been reserved
pnp: 00:0b: ioport range 0x280-0x2e7 has been reserved
pnp: 00:0b: ioport range 0x2f0-0x2f7 has been reserved
pnp: 00:0b: ioport range 0x300-0x377 has been reserved
pnp: 00:0b: ioport range 0x380-0x3bb has been reserved
pnp: 00:0b: ioport range 0x3c0-0x3e7 could not be reserved
pnp: 00:0b: ioport range 0x3f6-0x3f7 has been reserved
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_acpi_add: no address or irqs in _CRS
serio: i8042 AUX port at 0x62,0x64 irq 12
serio: i8042 KBD port at 0x62,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bis 0 at eisa0
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
VBTN PCI0 PCI1 PCI2 PCI3 PCI4 KBD USB0 USB1 USB2 USB3
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: LOading 4224KiB [1 disk] into ram disk... done
VFS: Mounted root (cramfs filesystem) readonly
Freeing unused kernel memory: 220k freed
initrd-tools: 0.1.77
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
ACPI: PCI interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 169
ata: 0x1f0 IDE port busy
ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
ata1: dev 0 ATAPI, max UDMA/33
ata1: dev 1 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
ata1: dev 1 configured for UDMA/33
scsi0 : ata_piix
elevator: using anticipatory as default io scheduler
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
ERROR: Removing 'pdc202xx_new': Device or resource busy
ERROR: Removing 'aec62xx': Device or resource busy
ERROR: Removing 'alim62xx': Device or resource busy
ERROR: Removing 'amd74xx': Device or resource busy
ERROR: Removing 'atiixp': Device or resource busy
ERROR: Removing 'cmd64x': Device or resource busy
ERROR: Removing 'cs5520': Device or resource busy
ERROR: Removing 'cs5530': Device or resource busy
ERROR: Removing 'cy82c693': Device or resource busy
ERROR: Removing 'generic': Device or resource busy
ERROR: Removing 'hpt34x': Device or resource busy
ERROR: Removing 'hpt366': Device or resource busy
ERROR: Removing 'ns87415': Device or resource busy
ERROR: Removing 'opti621': Device or resource busy
ERROR: Removing 'pdc202xx_old': Device or resource busy
ERROR: Removing 'piix': Device or resource busy
ERROR: Removing 'rz1000': Device or resource busy
ERROR: Removing 'sc1200': Device or resource busy
ERROR: Removing 'serverworks': Device or resource busy
ERROR: Removing 'siimage': Device or resource busy
ERROR: Removing 'sis5513': Device or resource busy
ERROR: Removing 'slc90e66': Device or resource busy
ERROR: Removing 'triflex': Device or resource busy
ERROR: Removing 'trm290': Device or resource busy
ERROR: Removing 'vis82cxxx': Device or resource busy
pivot_root: No such file or directory
/sbin/init: 432: cannot open dev/console: No such file
Kernel panic - not syncing: Attempt to kill init!
Reply to: