Conceptronic CardBus configuration
Hi,
I have a Compaq Presario 1200 with a Conceptronic(CON100TC)
CardBus(PCMCIA). This cardbus has a module realtek_cb.o which is
available from their manufacteur.
Meanwhile I already configured everything just like README says and
still don't get it to work.
Could someone help me ?
Thanks.
Regards,
Nuno
--- dmesg output----
Linux PCMCIA Card Services 3.1.8
kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:35:25 EST 2000
options: [pci] [cardbus] [apm]
Intel PCIC probe:
TI 1211 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 1 socket
host opts [0]: [ring] [pwr save] [pci + serial irq] [no pci irq]
[lat 32/176] [bus 32/34]
ISA irqs (scanned) = 3 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x10ff 0x1400-0x14ff
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-0x37f
0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138
--------------------
--- ifconfig eth0 192.168.1.2 ---------
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
--------------------------------------
---- /proc/interrupts --------------
CPU0
0: 11351 XT-PIC timer
1: 454 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
12: 0 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 52571 XT-PIC ide0
15: 4 XT-PIC ide1
NMI: 0
------------------------------------
----- lsmod output -----------
Module Size Used by
cb_enabler 2568 0 (unused)
ds 6696 1 [cb_enabler]
i82365 29800 1
pcmcia_core 44480 0 [cb_enabler ds i82365]
lockd 31912 1 (autoclean)
sunrpc 53604 1 (autoclean) [lockd]
--------------------------
Why is cb_enabler module unused !?
----/etc/pcmcia/config.opts-------
# Module for 32-bit CardBus Ethernet 10/100 (R5)
device "realtek_cb" class "network"
module "cb_enabler", "realtek_cb"
card "32-bit CardBus Ethernet 10/100 (R5)"
manfid 0x0260, 0x0235 bind "realtek_cb"
---------------------------
----/etc/pcmcia/config---------
device "realtek_cb"
class "network" module "cb_enabler", "realtek_cb"
card "32-bit CardBus Ethernet 10/100 (R5)"
manfid 0x0260, 0x0235
bind "realtek_cb"
----------------------------
Reply to: