Re: recs1440.bin boot fails in SCSI init
I don't know if this is the source of your problem, but I have found that the
WD7000 auto-probe will die when there is an Adaptec SCSI controller in the
system. This is a BIOS issue, not a controller issue.
On Fri, 3 Sep 1999, Tom Kuiper wrote:
> Date: Fri, 03 Sep 1999 19:05:21 PDT
> From: Tom Kuiper <email@example.com>
> To: firstname.lastname@example.org
> Cc: email@example.com
> Subject: recs1440.bin boot fails in SCSI init
> Resent-Date: 4 Sep 1999 02:12:15 -0000
> Resent-From: firstname.lastname@example.org
> Resent-cc: recipient list not shown: ;
> While booting an AST Premmia LX P/60 from a resc1440.bin or resc1440-safe.bin
> disk (images from the official 2.1 CD-ROM) the booting hangs during the SCSI
> initialization. It gets this far:
> (scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 14/0
> (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
> (scsi0) Downloading sequencer code... 412 instructions.
> The same computer boots fine from a previous COL 1.1 kernel on its (SCSI)
> hard disk. In that case the SCSI driver is identified as aic7xxx.
> An almost identical machine (more meomory, IDE hard disk) works fine from a
> Slackware kernel which is a little over a year old and also uses the aic7xxx
> I would be grateful for suggestion on working around this problem.
> Tom Kuiper
> Internet: kuiper@DSNra.JPL.NASA.gov (22.214.171.124)
> SnailMail: Jet Propulsion Lab 169-506, Pasadena, CA 91109
> Phone/fax: (818) 354-5623/8895
> WWW: http://DSNra.JPL.NASA.gov/~kuiper/
> To UNSUBSCRIBE, email to email@example.com
> with a subject of "unsubscribe". Trouble? Contact firstname.lastname@example.org