RES: RES: Bug - Problemas de instalação
Olá pessoal, sou eu novamente!!
Infelizmente a imagem que foi sugerida não funcionou com o meu hardware,
abaixo segue o resultado dos comandos:
>>lscpci
0000:00:00.0 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
0000:00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
0000:00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
0000:00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
0000:00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
0000:00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller
0000:00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge
Controller
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port
Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev a0)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev a0)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev a0)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev a0)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
0000:00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK
Controller
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 7c)
0000:00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCIE Bridge
0000:00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
0000:02:00.0 VGA compatible controller: nVidia Corporation GeForce 6200
TurboCache(TM) (rev a1)
0000:03:01.0 0403: VIA Technologies, Inc. VIA High Definition Audio
Controller (rev 10)
>>lspci -n
0000:00:00.0 0600: 1106:0308
0000:00:00.1 0600: 1106:1308
0000:00:00.2 0600: 1106:2308
0000:00:00.3 0600: 1106:3208
0000:00:00.4 0600: 1106:4308
0000:00:00.5 0800: 1106:5308
0000:00:00.7 0600: 1106:7308
0000:00:01.0 0604: 1106:b198
0000:00:02.0 0604: 1106:a208
0000:00:0f.0 0101: 1106:0591 (rev 80)
0000:00:0f.1 0101: 1106:0571 (rev 07)
0000:00:10.0 0c03: 1106:3038 (rev a0)
0000:00:10.1 0c03: 1106:3038 (rev a0)
0000:00:10.2 0c03: 1106:3038 (rev a0)
0000:00:10.3 0c03: 1106:3038 (rev a0)
0000:00:10.4 0c03: 1106:3104 (rev 86)
0000:00:11.0 0601: 1106:3337
0000:00:11.7 0600: 1106:287e
0000:00:12.0 0200: 1106:3065 (rev 7c)
0000:00:13.0 0604: 1106:337b
0000:00:13.1 0604: 1106:337a
0000:02:00.0 0300: 10de:0161 (rev a1)
0000:03:01.0 0403: 1106:3288 (rev 10)
>>dmesg | grep -i scsi
[4294994.104000] SCSI subsystem initialized
>>dmesg | grep -i hd
[4294674.850000] hdb: HL-DT-STDVD-RAM GSA-H20N, ATAPI CD/DVD-ROM drive
[4294675.429000] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB
Cache
[4294687.327000] hdb: media error (bad sector): status=0x51 { DriveReady
SeekComplete Error }
[4294687.327000] hdb: media error (bad sector): error=0x30 {
LastFailedSense=0x03 }
[4294687.327000] end_request: I/O error, dev hdb, sector 1429184
[4294687.327000] Buffer I/O error on device hdb, logical block 357296
[4294687.785000] hdb: media error (bad sector): status=0x51 { DriveReady
SeekComplete Error }
[4294687.785000] hdb: media error (bad sector): error=0x30 {
LastFailedSense=0x03 }
[4294687.785000] end_request: I/O error, dev hdb, sector 1429184
[4294687.785000] Buffer I/O error on device hdb, logical block 357296
[4294688.242000] hdb: media error (bad sector): status=0x51 { DriveReady
SeekComplete Error }
[4294688.242000] hdb: media error (bad sector): error=0x30 {
LastFailedSense=0x03 }
[4294688.242000] end_request: I/O error, dev hdb, sector 1429184
[4294688.242000] Buffer I/O error on device hdb, logical block 357296
[4294688.734000] hdb: media error (bad sector): status=0x51 { DriveReady
SeekComplete Error }
[4294688.734000] hdb: media error (bad sector): error=0x30 {
LastFailedSense=0x03 }
[4294688.734000] end_request: I/O error, dev hdb, sector 1429184
[4294688.734000] Buffer I/O error on device hdb, logical block 357296
[4294689.190000] hdb: media error (bad sector): status=0x51 { DriveReady
SeekComplete Error }
[4294689.190000] hdb: media error (bad sector): error=0x30 {
LastFailedSense=0x03 }
[4294689.190000] end_request: I/O error, dev hdb, sector 1429184
[4294689.190000] Buffer I/O error on device hdb, logical block 357296
[4294689.645000] hdb: media error (bad sector): status=0x51 { DriveReady
SeekComplete Error }
[4294689.645000] hdb: media error (bad sector): error=0x30 {
LastFailedSense=0x03 }
[4294689.645000] end_request: I/O error, dev hdb, sector 1429184
[4294689.645000] Buffer I/O error on device hdb, logical block 357296
[4294808.334000] hda-intel: Invalid position buffer, using LPIB read method
instead.
>>dmesg | grep -i ide
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294669.921000] CPU: After generic identify, caps: bfebfbff 20000000
00000000 00000000 0000651d 00000000 00000001
[4294669.921000] CPU: After vendor identify, caps: bfebfbff 20000000
00000000 00000000 0000651d 00000000 00000001
[4294670.658000] Boot video device is 0000:02:00.0
[4294671.096000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.096000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[4294673.239000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294673.239000] VP_IDE: chipset revision 7
[4294673.239000] VP_IDE: not 100% native mode: will probe irqs later
[4294673.239000] VP_IDE: Unknown VIA SouthBridge, disabling DMA. // O linux
não reconhece a controladora
[4294673.801000] Probing IDE interface ide0...
[4294674.901000] Probing IDE interface ide1...
[4294675.420000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294687.327000] ide: failed opcode was: unknown
[4294687.785000] ide: failed opcode was: unknown
[4294688.242000] ide: failed opcode was: unknown
[4294688.734000] ide: failed opcode was: unknown
[4294689.190000] ide: failed opcode was: unknown
[4294689.645000] ide: failed opcode was: unknown
Aproveito para esclarecer que chequei um meu hardware no site
http://kmuto.jp/debian/hcl/index.cgi com o resutado do comando lspci -n e o
site me retornou o seguinte resultado referente a controladora SATA 2
PCI ID Works? Vendor Device
11060591 - VIA Technologies, Inc. VT8237A SATA 2-Port
Controller
Siceramente acho que as distribuições Linux não estã prontas para suportar
SATA 2, estou quase desistindo. Se alguém tiver mais alguma sugestão por
favor me diga!
Agradeço desde já a coloboração de todos e do Gustavo e Otavio que vêem me
ajudando até agora!
Paolo Bordoni
-----Mensagem original-----
De: Otavio Salvador [mailto:otavio@debian.org]
Enviada em: terça-feira, 5 de setembro de 2006 16:17
Para: Paolo Bordoni Caldeira
Cc: 'Gustavo Franco'; debian-devel-portuguese@lists.debian.org
Assunto: Re: RES: Bug - Problemas de instalação
"Paolo Bordoni Caldeira" <paolobordoni@gmail.com> writes:
> Mas como proceder manualmente se quando eu executo fdisk -l não me retorna
> nada... como se não houvesse nenhum HD instaldo!?
Por favor, facamos o seguinte. Voce deve usar o d-i beta3 para
testar. Logo que ele iniciar voce deixa ele seguir ateh o momento que
ele iria iniciar o particionamento pois ai os modulos necessarios para
o suporte ao seu HD jah estarao carregados. Depois disso, vah para o
console 2 e verifique se ele foi detectado.
$: dmesg | grep -i hd
$: dmesg | grep -i ide
$: dmesg | grep -i scsi
Apos isso, veja se voce consegue ver as particoes com o fdisk -l e me
informe.
--
O T A V I O S A L V A D O R
---------------------------------------------
E-mail: otavio@debian.org UIN: 5906116
GNU/Linux User: 239058 GPG ID: 49A5F855
Home Page: http://www.freedom.ind.br/otavio
---------------------------------------------
"Microsoft gives you Windows ... Linux gives
you the whole house."
Reply to: