[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Accepted debram 0.6.5a (source i386 all)



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Sat, 25 Feb 2006 00:00:00 +0000
Source: debram
Binary: debram-data debram
Architecture: source i386 all
Version: 0.6.5a
Distribution: experimental
Urgency: low
Maintainer: Thaddeus H. Black <thb@debian.org>
Changed-By: Thaddeus H. Black <thb@debian.org>
Description: 
 debram     - ramified catalog of available .debs
 debram-data - debram's architecture-independent data
Changes: 
 debram (0.6.5a) experimental; urgency=low
 .
   * In a change of plan, began to update debram for etch.  Noted
     that 0.6.5 would not seem to be the last debram, after all.
   * Observed that sarge stable users should keep debram 0.6.x installed;
     that they should not update to 0.7.x or later, which concern
     packages not even in sarge.
   * Undertook in and after version 1.0 at least to increment the minor
     version number (as from 1.0 to 1.1) when rams move or ram numbers
     are reassigned.  Noted however that patchlevel incrementation (as
     from 1.1.0 to 1.1.1) may still suffice for some smaller changes to
     the ramification plan, such as clarifications or small changes to
     ram titles and, in some cases, the splitting of existing rams, the
     opening of new ones or the removal of obsolete ones.  Explained that
     the intent in and after 1.0 is to stabilize the ramification plan so
     far as the rapid ongoing pace of Debian development permits; yet to
     the extent that it does not permit, at least to increment version
     numbers appropriately.
   * Removed GFDL licensing.  (All of debram has been and continues
     to be licensed under GPL-2, but for historical reasons parts of
     it had been unnecessarily, confusingly been licensed in parallel
     under GFDL-1.1, too.)
   * Adhered to Policy 3.6.2.1.
   * Revised the source generally, the revisions including the following.
     - Reorganized the source directories.
     - Updated the manpage.
     - Revised helper/RelSteps.
     - Factored common definitions from the several helper scripts.
     - Reformatted the several helper scripts.  Made several further
       corrections and changes there.
     - Pointed readers of debian/copyright to the Debian archive rather
       than to the author's personal website for the latest source.
     - In src/xref.c, changed "The Ramification's Principal Classes"
       to "The Ramification's Principal Sections".
     - In src/argp.c, slightly improved the --help list footer.
     - Added the new helper/test hierarchy, containing some test data for
       the developer's convenience.  (What future use such test data
       might be put to is not known; for the present only
       helper/ramify-whatis is configured to use it.)  Noted here that
       future changes to helper/test will probably be regarded as too
       trivial to burden this changelog with; helper/test will not
       normally be tracked here.
     - In helper/, added the new scripts find-cmdsel-dupes,
       check-cmdsel-debs-data and cmdsel-debs, plus the data file
       check-cmdsel-debs.data for the last script.
     - Extended helper/check-ram-titles to check cmdsel.txt as well as
       debram.txt.
     - Fixed helper/buff-expand's response to illegal options.
     - Slightly improved helper/Alpha.pm's sorting of names having
       several capital letters, so that it correctly sorts "Tm Test"
       before "Tm TESTA" despite the capital "E" in the latter.
     - Let helper/update-date work also on the README.
     - Added appropriate "Notes on the Ramification Numbering System" to
       the backmatter of both debram.txt and cmdsel.txt.
   * Refined the ramification plan as follows.
     - Totally reramified [3600 Perl], from four branches into thirty-one,
       largely without regard to the old 3600 ramification plan.
     - Similarly totally reramified [3500 Python], from four branches
       into twenty-seven.
     - Added development notes relevant to the previous two points in the
       new file helper/PerlPythonNotes.
     - Split the old [1122 Text Scanning and Filtering] into separate
       scanning and filtering branches.  Consequently, because the
       last free number in the [1120 Text Commands] group was the
       unsuitable 1129, renumbered the other branches in the group to
       make room for the split.
     - Split [1211 Compression, Archival and Text/Data Codec] into three
       branches: 1211, 1215 and 1217.
     - Promoted [1245 Emacs] to a group: 1290.  Subramified the new
       group.
     - Reorganized the [1250 Console and TTY] group.
     - Added the new [1315 CUPS].
     - Subramified [1320 Fonts].
     - Reramified [1350 TeX] from two branches to nine.
     - Because [1640 Network Clients and Servers] had no more branch
       numbers available, removed [1642 FTP] therefrom, giving it its own
       new group: 1630.  Reserved the newly available number 1642 for
       future use.
     - Subramified [2210 Kernel Control and Management of Central
       Hardware].
     - Added the new [3273 Haskell].
     - Retired [4476 X-10], merging its remaining packages
       into [4477 Further Unusual or Specialized Devices].
     - Shifted [1313 PDF] to 1314, the better to accommodate related
       cmdsel.txt numbering .
     - Split the new [1276 Gettext] out from ram 1126.
     - Split [1115 File Moving, Copying and Naming] into [1115 File
       Moving and Naming] and [1116 File Copying].
     - Created the new group [3150 Message Passing, ORB, and Interface
       Definition], shifting the old ORB rams 3117 and 3147 thereto and
       adding the new [3151 Dbus] branch.
     - Added the new [8627 Further Network Foundation].  (At the moment,
       the branch remains empty, but it is a logical branch and its
       analog 1627 in cmdsel.txt is not empty.)
     - Subramified [1180 Date and Time].
   * Thoroughly revised and updated cmdsel.txt, which naturally lags,
     to track Debian 3.1r0a.
   * Added version 0.1.1 of the author's otherwise unpackaged DebParse
     Perl modules in the new helper/debparse/.  (This is not Debram
     software as such, but as far as the author knows it has never been
     used anywhere but in Debram development, so as it is unpackaged
     elsewhere it seems logical to keep it here with the Debram source.)
   * Updated the author's e-mail address here, in debian/control,
     in src/argp.c, and elsewhere.
   * Updated maint.txt.
Files: 
 4196b761e247c589191501ae97bf96b8 541 admin optional debram_0.6.5a.dsc
 d2f8508b9cca6edd27cd26d29b916cf9 539770 admin optional debram_0.6.5a.tar.gz
 22ff00d778634919b17a60172c2ba3c9 446928 admin optional debram-data_0.6.5a_all.deb
 ac06fcc7133b252ec0e5c2dad301462b 32082 admin optional debram_0.6.5a_i386.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)

iD8DBQFEAIcxh3E0gzgBXn4RAj8/AJ9wIGeB33EIOqCMuDJRPN4fIeelzQCgtPef
X0gS5VK81DhIPUCQZQXNMYw=
=A2to
-----END PGP SIGNATURE-----


Accepted:
debram-data_0.6.5a_all.deb
  to pool/main/d/debram/debram-data_0.6.5a_all.deb
debram_0.6.5a.dsc
  to pool/main/d/debram/debram_0.6.5a.dsc
debram_0.6.5a.tar.gz
  to pool/main/d/debram/debram_0.6.5a.tar.gz
debram_0.6.5a_i386.deb
  to pool/main/d/debram/debram_0.6.5a_i386.deb



Reply to: