[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: in845 显卡



明? 写道:
> 2009/5/12 liuxiaoxing <fsliuxiaoxing@sina.com>:
>   
>> teng zhaozhi 写道:
>>     
>>> 可以看看你的driver用的什么,在 /etc/X11/xorg.conf 这个文件中
>>>
>>> sudo vim /etc/X11/xorg.conf
>>>
>>> Section "Device"
>>> *Driver "intel" *
>>> VendorName "Videocard vendor"
>>> EndSection
>>>
>>> 一般用的都是intel,如果是没有,可以先不管;如果是vesa,请换成intel
>>>
>>> 然后往下找到
>>> Section "Screen"
>>> Identifier "Screen0"
>>> Device "Videocard0"
>>> Monitor "Monitor0"
>>> DefaultDepth 24
>>>
>>> *加上:
>>> SubSection "Display"
>>> Depth 24
>>> Modes "1280x768"
>>> EndSubSection
>>> *
>>> EndSection
>>>
>>> 然后重新启动下X看看 (或者重新启动)
>>>
>>>
>>>
>>> 打印机这个问题,你最好把打印机的型号,lspci/lsusb/dmesg之类的信息看看
>>>
>>>
>>> On Tue, May 12, 2009 at 3:47 PM, liuxiaoxing <fsliuxiaoxing@sina.com
>>> <mailto:fsliuxiaoxing@sina.com>> wrote:
>>>
>>>     我曾试用了Debian 5.0.1,但有两个问题不知如何解决,
>>>     1、显卡,我现时使用的是intel845,不知如何将分辨率调到1280x1024
>>>     2、hp打印机,用hplip配置后,测试页为空白,用hplip-gui,提示"Device
>>>     Communication Erroe"
>>>     请指教,谢谢!
>>>
>>>
>>>     --
>>>     To UNSUBSCRIBE, email to
>>>     debian-chinese-gb-REQUEST@lists.debian.org
>>>     <mailto:debian-chinese-gb-REQUEST@lists.debian.org>
>>>     with a subject of "unsubscribe". Trouble? Contact
>>>     listmaster@lists.debian.org <mailto:listmaster@lists.debian.org>
>>>
>>>
>>>
>>>
>>> --
>>> Kind regards
>>> 滕召智 (Ben teng)
>>> Cell: 13381221392
>>> MSN: freet15@hotmail.com <mailto:freet15@hotmail.com>
>>> Skype: freet15
>>>       
>> 在刚安装的系统中,xorg.conf 文件中好象没有Driver "Intel"一行
>> 安装了xserver-xorg-video-i810后,在xog.conf 中加上了Driver "i180"还是不行。
>> 打印机是hp的deskjet 2468,在Ubuntu8.04.2中使用正常,不知为何到了
>> Debian5.0.1下反而配置不了
>>     
> ubuntu的驱动比debian?定版的新,那几乎是一定的,就算ubuntu装个non-free的最新显卡也不奇怪吧,debian
> testing的显卡都不行,何况还是debian stable,只有unstable的可能够用。
>   
>> --
>> To UNSUBSCRIBE, email to debian-chinese-gb-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>>
>>
>>     
>
>
>
>   
近日再试,发现将系统升级至testing,再安装hplip-gui,打印机的问题就解决了.
对于intel845显卡,用testing还不完全正常,要升级到unstable才可以,因为里
边带有最新的intel驱动


Reply to: