Re: nvidia虽然配置好了，但是x还是_不来:(
--- Alex Lau <alex@dentonlive.com> 的正文：> wqinian
rao 提到:
>
>好不容易把nvidia装上，结果安装x的时候（以前什么X都没有装）现在才开始装X包，比如task-x-window-system-core
> >等，
>
>但是安装task-x-window-system却要把xfree86等删了才能装那两个rstart
> >and rstartd，但是装了后再装task-x-window-system
> >的时候又要xfree86等，又要把rstart and
> >rstartd删了。如此反复
> >不知道如何装了。我就没有装task-x-window-system,用
> >dpkg-reconfigure
> >
> I never like the virtual package like
> task-x-window-system.
> To much dependence problem. If you are using sid, I
> know the
> x-window-system package work.
>
>
>xserver-xfree86，应该配置没有错吧，选那个什么的时候我选nvidia没有错吧？安装完，我运行startx的时候却说Failed
> >to initialize the Nvdriver kernel module，和
> >XIO:fatal 20 error 104(Connection reset by peer) on
> >Xserver ":0:0"after 0 request (0 know processed)
> with 0 events remainiy
> >如果运行XFree86就出现Failed to initialize the
> Nvdriver
> >kernel module和Fatal server error no screens found
>
>请问是哪里出错了？？我在dpkg-reconfigure的时候，好象问了个显卡的bus吧，我没有写，因为lspci没有显示那格式啊，比如
>
>pic:xx:xx:xx只有最开始显示01:00.0，我这样输进去，结果却
> >
> after you install the module for nvdriver did you
> load it?
> run $>lsmod see you loaded it, if not $>modconf and
> load that.
> if you have kernel-module loaded and X wouldn't
> start
> the X driver may not work with the kernel-module.
> run $>XFree86 -configure as root, that will give you
> a config file
> in root home, match and see the different with your
> /etc/X11/XF86Config-4 file.
> Usually it will get the pci scan done for you also.
> Good luck
> Alex
您好：
我也照你这样做了，lsmod的确没有看见nvidia有关的，但是用modconf也没有找到啊，用XFree86
-configure
是给我了配置文件，但是执行这个命令的时候说mouse有问题，又说能找
到mouse，我ln -s /dev/psaux /dev/mouse是对的吧。。
请问到底我哪里出错了呢？？
_________________________________________________________
Do You Yahoo!?
体坛明星啸聚缤纷赛场 精彩时刻尽在雅虎体育
http://cn.sports.yahoo.com/
--
To UNSUBSCRIBE, email to debian-chinese-gb-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: