[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: nvidia雖然配置好了,但是x還是_不來:(



 --- Alex Lau <alex@dentonlive.com> 的正文:> wqinian
rao 提到:
>
>好不容易把nvidia裝上,結果安裝x的時候(以前什麼X都沒有裝)現在才開始裝X包,比如task-x-window-system-core
> >等,
>
>但是安裝task-x-window-system卻要把xfree86等刪了才能裝那兩個rstart
> >and rstartd,但是裝了後再裝task-x-window-system
> >的時候又要xfree86等,又要把rstart and
> >rstartd刪了。如此反復
> >不知道如何裝了。我就沒有裝task-x-window-system,用
> >dpkg-reconfigure
> >
> I never like the virtual package like
> task-x-window-system.
> To much dependence problem. If you are using sid, I
> know the
> x-window-system package work.
> 
>
>xserver-xfree86,應該配置沒有錯吧,選那個什麼的時候我選nvidia沒有錯吧?安裝完,我運行startx的時候卻說Failed
> >to initialize the Nvdriver kernel module,和
> >XIO:fatal 20 error 104(Connection reset by peer) on
> >Xserver ":0:0"after 0 request (0 know processed)
> with 0 events remainiy
> >如果運行XFree86就出現Failed to initialize the
> Nvdriver
> >kernel module和Fatal server error no screens found
>
>請問是哪裡出錯了??我在dpkg-reconfigure的時候,好象問了個顯卡的bus吧,我沒有寫,因為lspci沒有顯示那格式啊,比如
>
>pic:xx:xx:xx只有最開始顯示01:00.0,我這樣輸進去,結果卻
> >
> after you install the module for nvdriver did you
> load it?
> run $>lsmod see you loaded it, if not $>modconf and
> load that.
> if you have kernel-module loaded and X wouldn't
> start
> the X driver may not work with the kernel-module.
> run $>XFree86 -configure as root, that will give you
> a config file
> in root home, match and see the different with your
> /etc/X11/XF86Config-4 file.
> Usually it will get the pci scan done for you also.
> Good luck
> Alex

您好:
  
我也照你這樣做了,lsmod的確沒有看見nvidia有關的,但是用modconf也沒有找到啊,用XFree86
-configure
是給我了配置文件,但是執行這個命令的時候說mouse有問題,又說能找
到mouse,我ln -s /dev/psaux /dev/mouse是對的吧。。
請問到底我哪裡出錯了呢??

_________________________________________________________
Do You Yahoo!? 
體壇明星嘯聚繽紛賽場 精彩時刻盡在雅虎體育
http://cn.sports.yahoo.com/

-- 
To UNSUBSCRIBE, email to debian-chinese-gb-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-- 
| This message was re-posted from debian-chinese-gb@lists.debian.org
| and converted from gb2312 to big5 by an automatic gateway.


-- 
To UNSUBSCRIBE, email to debian-chinese-big5-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: