--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/cdimage/etch_di_beta2/amd64/iso-cd/debian-testing-amd64-binary-1.iso
uname -a:
Linux thhpc 2.6.15-1-em64t-p4 #2 Tue Mar 7 07:51:41 UTC 2006 x86_64 GNU/Linux
Date:
July 9, 2006, 15:00
Method:
How did you install? Install from full CD 1.
What did you boot off? Boot from CD.
Machine:
Desktop PC.
Processor:
Intel Pentium D 930 (Dual Core, EM64T)
Memory:
1 GB
Root Device:
SATA hard disk
Root Size/partition table:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System mounted
/dev/sda1 * 1 6527 52428096 7 HPFS/NTFS (WinXP)
/dev/sda2 6528 9018 20008957+ 83 Linux (/: i386)
/dev/sda4 9019 30401 171758947+ 5 Extended
/dev/sda5 9019 10843 14659281 83 Linux (/: amd64)
/dev/sda6 10844 11093 2008093+ 82 Linux swap
/dev/sda7 11094 11218 1004031 83 Linux (/var: i386)
/dev/sda8 11219 14866 29302528+ 83 Linux (/home)
/dev/sda9 14867 22162 58605088+ 83 Linux (/tmp)
/dev/sda10 22163 30401 66179736 83 Linux (/mnt/src)
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 02)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
0000:01:00.0 Ethernet controller: Marvell Technology Group Ltd. Marvell W8300 802.11 Adapter (rev 07)
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01)
0000:04:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 TurboCache(TM) (rev a1)
lspci -n:
0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:01.0 0604: 8086:2771 (rev 02)
0000:00:1b.0 0403: 8086:27d8 (rev 01)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1c.3 0604: 8086:27d6 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7 0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:01:00.0 0200: 11ab:1fa6 (rev 07)
0000:02:00.0 0200: 10ec:8168 (rev 01)
0000:04:00.0 0300: 10de:0161 (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Since it is quite often that the kernel and device drivers comes with
the Linux distribution cannot support the new hardware, for example,
in my desktop there is no support to my wireless card and my on-board
Gigabit card, I often want to recompile the newest version kernel and
search for the solutions to support these device in the net. Therefore,
the necessary softwares to compile the kernel is essential to me.
Without network supporting, I decide to install Debian from the first
CD, and hope that after recompiling kernel and accessing to the network,
I can continue to install other softwares from the Debian mirror site.
But I found that the libncurses-dev package is not available in the
first CD. I need it to configure the kernel options via "make menuconfig".
Therefore, it would be better to include the libncurses-dev in the
first CD, and also other packages which could make building kernel
easily.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
--- End Message ---