[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#246948: marked as done (No error if CD is ejected while integrity is being tested)

Your message dated Sun, 8 Oct 2006 13:35:11 +0100
with message-id <20061008123510.GX30190@einval.com>
and subject line Closing old bugs
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: installation-reports

Debian-installer-version: 20040429. Got from 
uname -a: [Installation failed]
Date: 2004, May 2nd
Method: 50 Mb boot CD then network install over a NAT
        110 Mb boot CD then network install over a NAT

Machine: IBM Aptiva E32
Processor: Pentium MMX 233 Mhz
Memory: 64 Mb
Root Device: IDE 4 Gb hard drive (QUANTUM BIGFOOT_CY4320A)
Root Size/partition table: [Installation failed]
Output of lspci: 00:00.0 Host bridge: ALi Corporation M1531 [Aladdin IV] (rev 
00:02.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev 
00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB 
[Mach64 GTB] (rev 9a)
00:0b.0 IDE interface: ALi Corporation M5229 IDE (rev 20)
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [ ]
Config network:         [ ]
Detect CD:              [E]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it


Although I downloaded the files 2 times each and burned it on 3 different CDs 
using 2 different CD-burners, the installation always failed while trying to 
load the file libc-udeb.
Here are the MD5 checksums of the files I downloaded:
eb2f763d967286313bd339f781ce664d  sarge-i386-businesscard.iso
52a66d5290a43e17dd0216467962bfc9  sarge-i386-netinst.iso
When checking CD's integrity, it says that the 
file ./dists/sarge/main/binary-i386/Release is corrupted.

Some other minor remarks:
Display is uglier on my computer with the framebuffer than without it.
French translation is very incomplete.
When ejecting CD while testing integrity, it says the CD is ok.

--- End Message ---
--- Begin Message ---
 #218032 - Descarga CD's con jigdo
 #239078 - install: Beta3, BIOS does not boot CD
 #239290 - Can not boot the CD at all
 #246948 - No error if CD is ejected while integrity is being tested
 #248055 - missing appropriate powerpc kernel on sarge CD
 #251825 - full cd isses: missing netcfg, missing kernel for modern macs
d-i and debian CDs have seen lots of development (including a stable
release and several etch betas) since the last traffic on these bugs,
so I'm closing these - the reported problems should all be fixed by
now. If you're still experiencing problems, please re-open or open a
new bug against newer versions.

Steve McIntyre, Cambridge, UK.                                steve@einval.com
Who needs computer imagery when you've got Brian Blessed?

Attachment: signature.asc
Description: Digital signature

--- End Message ---

Reply to: