[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#809611: d-i fails to boot on HP mv2120

Hi Martin,

I attempted a network installation on an MV1220 currently running Jessie following your instructions regarding setting the load address of 0x600000 and the netboot.img from the following location from the daily builds:

https://d-i.debian.org/daily-images/armel/daily/orion5x/network-console/hp/mv2120/

The good news is that given the load address change from 0x400000 to 0x600000 allowed the MV2120 to boot into the ssh based installer.

The bad news is the installed failed from what looked like some sort of segmentation faults in the installer from the looks of the logs which I included below.

Below is the error I received:


     lqqqqqqqqqqqqqqqqu [!!] Debian installer main menu tqqqqqqqqqqqqqqqqk
     x                                                                   x
     x                     Installation step failed                      x
     x An installation step failed. You can try to run the failing item  x
     x again from the menu, or skip it and choose something else. The    x
     x failing step is: Choose mirror to install from (menu item)        x
     x                                                                   x
     x                            <Continue>                             x
     x                                                                   x
     mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj

Using the expert installation fails in just the same manner.

Attached below are the debug hardware summary and syslog which I hope are useful:

Hardware Summary
-----------------------------------------------------------------------------
uname -a: Linux backup 4.6.0-1-marvell #1 Debian 4.6.4-1 (2016-07-18) armv5tel GNU/Linux
lsmod: Module                  Size  Used by
lsmod: ext4                  495393  0
lsmod: crc16                   1229  1 ext4
lsmod: jbd2                   82552  1 ext4
lsmod: crc32c_generic          1561  0
lsmod: mbcache                 3990  1 ext4
lsmod: sd_mod                 30069  0
lsmod: sata_mv                25273  0
lsmod: libata                162527  1 sata_mv
lsmod: scsi_mod              176204  2 libata,sd_mod
lsmod: mvmdio                  3004  1
lsmod: mv643xx_eth            26419  0
lsmod: of_mdio                 5511  2 mvmdio,mv643xx_eth
lsmod: libphy                 27187  3 mvmdio,of_mdio,mv643xx_eth
df: Filesystem           1K-blocks      Used Available Use% Mounted on
df: none                     12404        20     12384   0% /run
df: devtmpfs                 57312         0     57312   0% /dev
free:              total         used         free       shared      buffers
free: Mem:        124020        38188        85832        21720            0
free: -/+ buffers:              38188        85832
free: Swap:            0            0            0
/proc/cmdline: console=ttyS0,115200
/proc/cpuinfo: processor : 0
/proc/cpuinfo: model name : Feroceon rev 0 (v5l)
/proc/cpuinfo: BogoMIPS : 333.33
/proc/cpuinfo: Features : swp half thumb fastmult edsp 
/proc/cpuinfo: CPU implementer : 0x41
/proc/cpuinfo: CPU architecture: 5TEJ
/proc/cpuinfo: CPU variant : 0x0
/proc/cpuinfo: CPU part : 0x926
/proc/cpuinfo: CPU revision : 0
/proc/cpuinfo: 
/proc/cpuinfo: Hardware : HP Media Vault mv2120
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/iomem: 00000000-07ffffff : System RAM
/proc/iomem:   00008000-00519923 : Kernel code
/proc/iomem:   00562000-0060648f : Kernel data
/proc/iomem: f1011000-f101101f : mv64xxx_i2c.0
/proc/iomem:   f1011000-f101101f : mv64xxx_i2c.0
/proc/iomem: f1012000-f10120ff : serial8250.0
/proc/iomem:   f1012000-f101201f : serial
/proc/iomem: f1020108-f102010b : orion_wdt
/proc/iomem: f1020300-f1020303 : orion_wdt
/proc/iomem: f1050000-f1050fff : orion-ehci.0
/proc/iomem: f1060900-f10609ff : xor 0 low
/proc/iomem: f1060b00-f1060bff : xor 0 high
/proc/iomem: f1072000-f1075fff : ge00 base
/proc/iomem:   f1072004-f1072087 : ge00 mvmdio base
/proc/iomem: f1080000-f1084fff : sata base
/proc/iomem: f1090000-f109ffff : regs
/proc/iomem: f10a0000-f10a0fff : orion-ehci.1
/proc/iomem: f2200000-f2201fff : sram
/proc/iomem: f4000000-f407ffff : physmap-flash.0
/proc/iomem:   f4000000-f407ffff : physmap-flash.0
/proc/interrupts:            CPU0       
/proc/interrupts:   1:      14414  orion_irq Level     orion_tick
/proc/interrupts:   4:        745  orion_irq Level     serial
/proc/interrupts:   6:         97  orion_irq Level     mv64xxx_i2c
/proc/interrupts:  22:        284  orion_irq Level     eth0
/proc/interrupts:  23:       1180  orion_irq Level     orion-mdio
/proc/interrupts:  30:         67  orion_irq Level     sata_mv[sata_mv.0]
/proc/interrupts:  31:          2  orion_irq Level     mv_xor.0
/proc/interrupts:  36:          0  orion_gpio0  36 Edge      rtc-pcf8563
/proc/interrupts: Err:          0
/proc/meminfo: MemTotal:         124020 kB
/proc/meminfo: MemFree:           85804 kB
/proc/meminfo: MemAvailable:      84756 kB
/proc/meminfo: Buffers:               0 kB
/proc/meminfo: Cached:            21720 kB
/proc/meminfo: SwapCached:            0 kB
/proc/meminfo: Active:            21676 kB
/proc/meminfo: Inactive:           8276 kB
/proc/meminfo: Active(anon):      21676 kB
/proc/meminfo: Inactive(anon):     8276 kB
/proc/meminfo: Active(file):          0 kB
/proc/meminfo: Inactive(file):        0 kB
/proc/meminfo: Unevictable:           0 kB
/proc/meminfo: Mlocked:               0 kB
/proc/meminfo: HighTotal:             0 kB
/proc/meminfo: HighFree:              0 kB
/proc/meminfo: LowTotal:         124020 kB
/proc/meminfo: LowFree:           85804 kB
/proc/meminfo: SwapTotal:             0 kB
/proc/meminfo: SwapFree:              0 kB
/proc/meminfo: Dirty:                 0 kB
/proc/meminfo: Writeback:             0 kB
/proc/meminfo: AnonPages:          8284 kB
/proc/meminfo: Mapped:             6144 kB
/proc/meminfo: Shmem:             21720 kB
/proc/meminfo: Slab:               4180 kB
/proc/meminfo: SReclaimable:       1952 kB
/proc/meminfo: SUnreclaim:         2228 kB
/proc/meminfo: KernelStack:         472 kB
/proc/meminfo: PageTables:          496 kB
/proc/meminfo: NFS_Unstable:          0 kB
/proc/meminfo: Bounce:                0 kB
/proc/meminfo: WritebackTmp:          0 kB
/proc/meminfo: CommitLimit:       62008 kB
/proc/meminfo: Committed_AS:      37240 kB
/proc/meminfo: VmallocTotal:     901120 kB
/proc/meminfo: VmallocUsed:           0 kB
/proc/meminfo: VmallocChunk:          0 kB 
-----------------------------------------------------------------------------

Syslog
-----------------------------------------------------------------------------
Aug  6 21:49:54 syslogd started: BusyBox v1.22.1
Aug  6 21:49:54 kernel: klogd started: BusyBox v1.22.1 (Debian 1:1.22.0-19)
Aug  6 21:49:54 kernel: [    0.000000] Booting Linux on physical CPU 0x0
Aug  6 21:49:54 kernel: [    0.000000] Linux version 4.6.0-1-marvell (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 Debian 4.6.4-1 (2016-07-18)
Aug  6 21:49:54 kernel: [    0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f
Aug  6 21:49:54 kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Aug  6 21:49:54 kernel: [    0.000000] Machine: HP Media Vault mv2120
Aug  6 21:49:54 kernel: [    0.000000] Clearing invalid memory bank 0KB@0xffffffff
Aug  6 21:49:54 kernel: [    0.000000] Clearing invalid memory bank 0KB@0xffffffff
Aug  6 21:49:54 kernel: [    0.000000] Clearing invalid memory bank 0KB@0xffffffff
Aug  6 21:49:54 kernel: [    0.000000] Ignoring unrecognised tag 0x00000000
Aug  6 21:49:54 kernel: [    0.000000] Ignoring unrecognised tag 0x00000000
Aug  6 21:49:54 kernel: [    0.000000] Ignoring unrecognised tag 0x00000000
Aug  6 21:49:54 kernel: [    0.000000] Ignoring unrecognised tag 0x41000403
Aug  6 21:49:54 kernel: [    0.000000] Memory policy: Data cache writeback
Aug  6 21:49:54 kernel: [    0.000000] On node 0 totalpages: 32768
Aug  6 21:49:54 kernel: [    0.000000] free_area_init_node: node 0, pgdat c05b3a2c, node_mem_map c7ef9000
Aug  6 21:49:54 kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Aug  6 21:49:54 kernel: [    0.000000]   Normal zone: 0 pages reserved
Aug  6 21:49:54 kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Aug  6 21:49:54 kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Aug  6 21:49:54 kernel: [    0.000000] pcpu-alloc: [0] 0 
Aug  6 21:49:54 kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Aug  6 21:49:54 kernel: [    0.000000] Kernel command line: console=ttyS0,115200
Aug  6 21:49:54 kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Aug  6 21:49:54 kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug  6 21:49:54 kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Aug  6 21:49:54 kernel: [    0.000000] Memory: 114624K/131072K available (3773K kernel code, 367K rwdata, 1416K rodata, 288K init, 289K bss, 16448K reserved, 0K cma-reserved, 0K highmem)
Aug  6 21:49:54 kernel: [    0.000000] Virtual kernel memory layout:
Aug  6 21:49:54 kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Aug  6 21:49:54 kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Aug  6 21:49:54 kernel: [    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
Aug  6 21:49:54 kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
Aug  6 21:49:54 kernel: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
Aug  6 21:49:54 kernel: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
Aug  6 21:49:54 kernel: [    0.000000]       .text : 0xc0008000 - 0xc0519924   (5191 kB)
Aug  6 21:49:54 kernel: [    0.000000]       .init : 0xc051a000 - 0xc0562000   ( 288 kB)
Aug  6 21:49:54 kernel: [    0.000000]       .data : 0xc0562000 - 0xc05bdcd0   ( 368 kB)
Aug  6 21:49:54 kernel: [    0.000000]        .bss : 0xc05bdcd0 - 0xc0606490   ( 290 kB)
Aug  6 21:49:54 kernel: [    0.000000] NR_IRQS:16 nr_irqs:65 65
Aug  6 21:49:54 kernel: [    0.000000] Switching to timer-based delay loop, resolution 6ns
Aug  6 21:49:54 kernel: [    0.000018] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
Aug  6 21:49:54 kernel: [   10.599207] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
Aug  6 21:49:54 kernel: [   10.599979] Console: colour dummy device 80x30
Aug  6 21:49:54 kernel: [   10.600031] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=666666)
Aug  6 21:49:54 kernel: [   10.600065] pid_max: default: 32768 minimum: 301
Aug  6 21:49:54 kernel: [   10.600277] Security Framework initialized
Aug  6 21:49:54 kernel: [   10.600302] Yama: disabled by default; enable with sysctl kernel.yama.*
Aug  6 21:49:54 kernel: [   10.600473] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.600506] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.602497] CPU: Testing write buffer coherency: ok
Aug  6 21:49:54 kernel: [   10.602777] ftrace: allocating 16337 entries in 32 pages
Aug  6 21:49:54 kernel: [   10.664194] Setting up static identity map for 0x8200 - 0x823c
Aug  6 21:49:54 kernel: [   10.669793] devtmpfs: initialized
Aug  6 21:49:54 kernel: [   10.672730] VFP support v0.3: not present
Aug  6 21:49:54 kernel: [   10.673181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Aug  6 21:49:54 kernel: [   10.673819] pinctrl core: initialized pinctrl subsystem
Aug  6 21:49:54 kernel: [   10.676984] NET: Registered protocol family 16
Aug  6 21:49:54 kernel: [   10.678070] DMA: preallocated 256 KiB pool for atomic coherent allocations
Aug  6 21:49:54 kernel: [   10.680123] cpuidle: using governor ladder
Aug  6 21:49:54 kernel: [   10.680165] cpuidle: using governor menu
Aug  6 21:49:54 kernel: [   10.680269] Orion ID: MV88F5182-A2. TCLK=166666667.
Aug  6 21:49:54 kernel: [   10.680664] initial MPP regs: 00000003 00000000 03ff0000
Aug  6 21:49:54 kernel: [   10.680707]   final MPP regs: 00000003 55550000 03ff5550
Aug  6 21:49:54 kernel: [   10.697229] clocksource: Switched to clocksource orion_clocksource
Aug  6 21:49:54 kernel: [   10.739259] VFS: Disk quotas dquot_6.6.0
Aug  6 21:49:54 kernel: [   10.739415] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.763610] NET: Registered protocol family 2
Aug  6 21:49:54 kernel: [   10.765651] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.765721] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.765775] TCP: Hash tables configured (established 1024 bind 1024)
Aug  6 21:49:54 kernel: [   10.765948] UDP hash table entries: 256 (order: 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.766015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Aug  6 21:49:54 kernel: [   10.766584] NET: Registered protocol family 1
Aug  6 21:49:54 kernel: [   10.766729] PCI: CLS 0 bytes, default 32
Aug  6 21:49:54 kernel: [   10.767341] Unpacking initramfs...
Aug  6 21:49:54 kernel: [   12.949123] Freeing initrd memory: 9108K (c0800000 - c10e5000)
Aug  6 21:49:54 kernel: [   12.950919] futex hash table entries: 256 (order: -1, 3072 bytes)
Aug  6 21:49:54 kernel: [   12.951131] audit: initializing netlink subsys (disabled)
Aug  6 21:49:54 kernel: [   12.951292] audit: type=2000 audit(2.328:1): initialized
Aug  6 21:49:54 kernel: [   12.952438] workingset: timestamp_bits=28 max_order=15 bucket_order=0
Aug  6 21:49:54 kernel: [   12.952825] zbud: loaded
Aug  6 21:49:54 kernel: [   12.958896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Aug  6 21:49:54 kernel: [   12.959390] io scheduler noop registered
Aug  6 21:49:54 kernel: [   12.959527] io scheduler cfq registered (default)
Aug  6 21:49:54 kernel: [   12.961046] mv_xor mv_xor.0: Marvell shared XOR driver
Aug  6 21:49:54 kernel: [   12.996605] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
Aug  6 21:49:54 kernel: [   12.997628] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Aug  6 21:49:54 kernel: [   12.999458] console [ttyS0] disabled
Aug  6 21:49:54 kernel: [   13.019711] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 4, base_baud = 10416666) is a 16550A
Aug  6 21:49:54 kernel: [   13.473943] console [ttyS0] enabled
Aug  6 21:49:54 kernel: [   13.479546] physmap platform flash device: 00080000 at f4000000
Aug  6 21:49:54 kernel: [   13.485741] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000b9
Aug  6 21:49:54 kernel: [   13.496001] Amd/Fujitsu Extended Query Table at 0x0040
Aug  6 21:49:54 kernel: [   13.501187]   Amd/Fujitsu Extended Query version 1.0.
Aug  6 21:49:54 kernel: [   13.506274] physmap-flash.0: JEDEC Device ID is 0xB9. Assuming broken CFI table.
Aug  6 21:49:54 kernel: [   13.513692] physmap-flash.0: Swapping erase regions for top-boot CFI table.
Aug  6 21:49:54 kernel: [   13.520681] number of CFI chips: 1
Aug  6 21:49:54 kernel: [   13.549422] Creating 1 MTD partitions on "physmap-flash.0":
Aug  6 21:49:54 kernel: [   13.555100] 0x000000000000-0x000000080000 : "firmware"
Aug  6 21:49:54 kernel: [   13.564862] mousedev: PS/2 mouse device common for all mice
Aug  6 21:49:54 kernel: [   13.571417] i2c /dev entries driver
Aug  6 21:49:54 kernel: [   13.576129] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
Aug  6 21:49:54 kernel: [   13.587959] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
Aug  6 21:49:54 kernel: [   13.598371] ledtrig-cpu: registered to indicate activity on CPUs
Aug  6 21:49:54 kernel: [   13.605674] NET: Registered protocol family 17
Aug  6 21:49:54 kernel: [   13.611942] registered taskstats version 1
Aug  6 21:49:54 kernel: [   13.616432] zswap: loaded using pool lzo/zbud
Aug  6 21:49:54 kernel: [   13.623179] rtc-pcf8563 0-0051: setting system clock to 1970-08-06 21:49:44 UTC (18827384)
Aug  6 21:49:54 kernel: [   13.635509] Freeing unused kernel memory: 288K (c051a000 - c0562000)
Aug  6 21:49:54 kernel: [   13.641911] This architecture does not have kernel memory protection.
Aug  6 21:49:54 kernel: [   13.765202] random: systemd-udevd urandom read with 12 bits of entropy available
Aug  6 21:49:54 kernel: [   14.218436] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Aug  6 21:49:54 kernel: [   14.290007] libphy: PHY orion-mdio-mii:08 not found
Aug  6 21:49:54 kernel: [   14.613385] libphy: orion_mdio_bus: probed
Aug  6 21:49:54 kernel: [   14.692227] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:0a:e4:86:fd:05
Aug  6 21:49:54 kernel: [   14.752297] SCSI subsystem initialized
Aug  6 21:49:54 kernel: [   14.927607] libata version 3.00 loaded.
Aug  6 21:49:54 kernel: [   14.944822] sata_mv sata_mv.0: version 1.28
Aug  6 21:49:54 kernel: [   14.945014] sata_mv sata_mv.0: cannot get optional clkdev
Aug  6 21:49:54 kernel: [   14.996386] sata_mv sata_mv.0: slots 32 ports 2
Aug  6 21:49:54 kernel: [   15.123508] scsi host0: sata_mv
Aug  6 21:49:54 kernel: [   15.160394] scsi host1: sata_mv
Aug  6 21:49:54 kernel: [   15.180300] ata1: SATA max UDMA/133 irq 30
Aug  6 21:49:54 kernel: [   15.184496] ata2: SATA max UDMA/133 irq 30
Aug  6 21:49:54 kernel: [   20.693299] ata1: link is slow to respond, please be patient (ready=0)
Aug  6 21:49:54 kernel: [   22.209326] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug  6 21:49:54 kernel: [   22.235798] ata1.00: ATA-6: ST380023AS, 3.01, max UDMA/133
Aug  6 21:49:54 kernel: [   22.241344] ata1.00: 156301488 sectors, multi 0: LBA 
Aug  6 21:49:54 kernel: [   22.246451] ata1.00: applying bridge limits
Aug  6 21:49:54 kernel: [   22.257779] ata1.00: configured for UDMA/100
Aug  6 21:49:54 kernel: [   22.263346] scsi 0:0:0:0: Direct-Access     ATA      ST380023AS       3.01 PQ: 0 ANSI: 5
Aug  6 21:49:54 kernel: [   22.588829] ata2: SATA link down (SStatus 0 SControl 300)
Aug  6 21:49:54 kernel: [   22.737860] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Aug  6 21:49:54 kernel: [   22.770340] sd 0:0:0:0: [sda] Write Protect is off
Aug  6 21:49:54 kernel: [   22.775226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug  6 21:49:54 kernel: [   22.777507] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug  6 21:49:54 kernel: [   22.816197]  sda: sda1
Aug  6 21:49:54 kernel: [   22.826789] sd 0:0:0:0: [sda] Attached SCSI disk
Aug  6 21:50:02 preseed: successfully loaded preseed file from file:///preseed.cfg
Aug  6 21:50:05 init: starting pid 967, tty '': '/sbin/reopen-console /sbin/debian-installer'
Aug  6 21:50:05 init: starting pid 970, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
Aug  6 21:50:07 debconf: Setting debconf/language to en
Aug  6 21:50:07 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Aug  6 21:50:07 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:50:07 main-menu[989]: INFO: Menu item 'ethdetect' selected
Aug  6 21:50:09 kernel: [   38.697341] random: nonblocking pool is initialized
Aug  6 21:50:10 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Aug  6 21:50:10 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug  6 21:50:12 apt-install: Queueing package udev for later installation
Aug  6 21:50:12 apt-install: Queueing package pciutils for later installation
Aug  6 21:50:14 check-missing-firmware: looking at dmesg for the first time
Aug  6 21:50:14 check-missing-firmware: saving timestamp for a later use: [   38.697341]
Aug  6 21:50:14 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Aug  6 21:50:14 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Aug  6 21:50:14 check-missing-firmware: no missing firmware in loaded kernel modules
Aug  6 21:50:14 check-missing-firmware: taking network interface -n up/down
Aug  6 21:50:14 check-missing-firmware: taking network interface eth0 up/down
Aug  6 21:50:14 kernel: [   43.970064] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
Aug  6 21:50:15 check-missing-firmware: looking at dmesg again, restarting from \[   38.697341\]
Aug  6 21:50:16 check-missing-firmware: timestamp found, truncating dmesg accordingly
Aug  6 21:50:16 check-missing-firmware: saving timestamp for a later use: [   43.970064]
Aug  6 21:50:16 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Aug  6 21:50:16 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping
Aug  6 21:50:16 check-missing-firmware: no missing firmware in loaded kernel modules
Aug  6 21:50:16 main-menu[989]: (process:1017): ip: SIOCGIFFLAGS: No such device
Aug  6 21:50:16 main-menu[989]: (process:1017): ip: SIOCGIFFLAGS: No such device
Aug  6 21:50:16 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Aug  6 21:50:16 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:50:16 main-menu[989]: INFO: Menu item 'netcfg' selected
Aug  6 21:50:16 main-menu[989]: INFO: Falling back to the package description for crypto-modules-4.6.0-1-marvell-di
Aug  6 21:50:16 main-menu[989]: INFO: Falling back to the package description for crypto-modules-4.6.0-1-marvell-di
Aug  6 21:50:16 netcfg[1396]: INFO: Starting netcfg v.1.138
Aug  6 21:50:16 netcfg[1396]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill.
Aug  6 21:50:16 netcfg[1396]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline
Aug  6 21:50:16 netcfg[1396]: INFO: Taking down interface eth0
Aug  6 21:50:17 netcfg[1396]: INFO: Taking down interface lo
Aug  6 21:50:17 netcfg[1396]: INFO: Activating interface eth0
Aug  6 21:50:17 netcfg[1396]: DEBUG: State is now 0
Aug  6 21:50:17 netcfg[1396]: DEBUG: Want link on eth0
Aug  6 21:50:17 netcfg[1396]: INFO: Waiting time set to 3
Aug  6 21:50:17 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:17 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:20 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:20 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down
Aug  6 21:50:20 netcfg[1396]: INFO: Reached timeout for link detection on eth0
Aug  6 21:50:20 netcfg[1396]: DEBUG: Commencing network autoconfiguration on eth0
Aug  6 21:50:20 netcfg[1396]: DEBUG: rdnssd started; PID: 1411
Aug  6 21:50:20 kernel: [   49.476308] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
Aug  6 21:50:20 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:20 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:20 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:20 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:20 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:20 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:20 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:20 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:21 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:21 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:21 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:21 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:21 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:21 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:22 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:22 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:22 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:22 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:22 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:22 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:22 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:23 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:23 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:23 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:23 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:23 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:23 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:23 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:23 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:23 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local)
Aug  6 21:50:23 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address
Aug  6 21:50:23 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
Aug  6 21:50:23 netcfg[1396]: DEBUG: ip line:     link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff
Aug  6 21:50:23 netcfg[1396]: INFO: No IPv6 support found... how does that happen?
Aug  6 21:50:23 netcfg[1396]: DEBUG: Stopping rdnssd, PID 1411
Aug  6 21:50:23 netcfg[1396]: DEBUG: No RA received; attempting IPv4 autoconfig
Aug  6 21:50:23 netcfg[1396]: WARNING **: Started DHCP client; PID is 1437
Aug  6 21:50:23 udhcpc: Got IP 192.168.0.8 (using eth0) and routing through 192.168.0.1
Aug  6 21:50:27 netcfg[1396]: DEBUG: Reading domain name returned via DHCP
Aug  6 21:50:27 netcfg[1396]: DEBUG: DHCP domain name is 'home.lan'
Aug  6 21:50:27 netcfg[1396]: DEBUG: Reading nameservers from /etc/resolv.conf
Aug  6 21:50:27 netcfg[1396]: DEBUG: Read nameserver 192.168.0.2
Aug  6 21:50:27 netcfg[1396]: DEBUG: Read nameserver 192.168.0.11
Aug  6 21:50:27 netcfg[1396]: DEBUG: State is now 1
Aug  6 21:50:27 netcfg[1396]: DEBUG: State is now 2
Aug  6 21:50:27 netcfg[1396]: DEBUG: State is now 5
Aug  6 21:50:27 netcfg[1396]: DEBUG: Using DNS to try and obtain default hostname
Aug  6 21:50:27 netcfg[1396]: DEBUG: Getting default hostname from rDNS lookup of autoconfigured address 192.168.0.8
Aug  6 21:50:27 netcfg[1396]: DEBUG: Hostname found: backup.home.lan
Aug  6 21:50:27 netcfg[1396]: DEBUG: backup.home.lan is a valid FQDN
Aug  6 21:50:27 netcfg[1396]: DEBUG: We have a real FQDN
Aug  6 21:50:27 netcfg[1396]: DEBUG: Preseeding domain from global: home.lan
Aug  6 21:50:27 netcfg[1396]: DEBUG: State is now 6
Aug  6 21:50:27 netcfg[1396]: DEBUG: Network config complete
Aug  6 21:50:27 netcfg[1396]: DEBUG: No interface given; clearing /etc/network/interfaces
Aug  6 21:50:27 netcfg[1396]: DEBUG: Writing informative header
Aug  6 21:50:27 netcfg[1396]: DEBUG: Success!
Aug  6 21:50:27 netcfg[1396]: DEBUG: Writing loopback interface
Aug  6 21:50:27 netcfg[1396]: DEBUG: Success!
Aug  6 21:50:27 netcfg[1396]: DEBUG: Writing DHCP stanza for eth0
Aug  6 21:50:27 netcfg[1396]: INFO: Detected eth0 as a hotpluggable device
Aug  6 21:50:27 netcfg[1396]: DEBUG: Success!
Aug  6 21:50:28 main-menu[989]: (process:1395): udhcpc (v1.22.1) started
Aug  6 21:50:28 main-menu[989]: (process:1395): Sending discover...
Aug  6 21:50:28 main-menu[989]: (process:1395): Sending select for 192.168.0.8...
Aug  6 21:50:28 main-menu[989]: (process:1395): Lease of 192.168.0.8 obtained, lease time 3600
Aug  6 21:50:28 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Aug  6 21:50:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:50:28 main-menu[989]: INFO: Menu item 'network-console' selected
Aug  6 21:50:49 sshd[1498]: Server listening on 0.0.0.0 port 22.
Aug  6 21:50:49 apt-install: Queueing package openssh-server for later installation
Aug  6 21:50:55 sshd[1516]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus
Aug  6 21:51:05 sshd[1516]: Accepted password for installer from 192.168.0.160 port 56579 ssh2
Aug  6 21:51:05 sshd[1518]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Aug  6 21:51:05 sshd[1518]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Aug  6 21:51:07 debconf: Setting debconf/language to en
Aug  6 21:51:11 debconf: Setting debconf/priority to low
Aug  6 21:51:11 debconf: Setting debconf/language to en
Aug  6 21:51:11 main-menu[1531]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Aug  6 21:51:11 main-menu[1531]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:11 main-menu[1531]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:13 main-menu[1531]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:13 main-menu[1531]: INFO: Menu item 'choose-mirror' selected
Aug  6 21:51:13 main-menu[1531]: WARNING **: Unable to set title for choose-mirror.
Aug  6 21:51:14 anna-install: Queueing udeb apt-mirror-setup for later installation
Aug  6 21:51:14 main-menu[1531]: (process:1557): Segmentation fault
Aug  6 21:51:14 main-menu[1531]: WARNING **: Configuring 'choose-mirror' failed with error code 139
Aug  6 21:51:14 main-menu[1531]: WARNING **: Menu item 'choose-mirror' failed.
Aug  6 21:51:14 main-menu[1531]: WARNING **: Unable to set title for choose-mirror.
Aug  6 21:51:14 main-menu[1531]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:28 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Aug  6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:51:28 main-menu[989]: INFO: Menu item 'choose-mirror' selected
Aug  6 21:51:28 main-menu[989]: WARNING **: Unable to set title for choose-mirror.
Aug  6 21:51:28 main-menu[989]: (process:1587): Segmentation fault
Aug  6 21:51:28 main-menu[989]: WARNING **: Configuring 'choose-mirror' failed with error code 139
Aug  6 21:51:28 main-menu[989]: WARNING **: Menu item 'choose-mirror' failed.
Aug  6 21:51:28 main-menu[989]: WARNING **: Unable to set title for choose-mirror.
Aug  6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:52:22 main-menu[989]: INFO: Modifying debconf priority limit from 'high' to 'medium'
Aug  6 21:52:22 debconf: Setting debconf/priority to medium
Aug  6 21:52:22 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Aug  6 21:52:23 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:52:23 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:52:34 main-menu[989]: INFO: Falling back to the package description for choose-mirror
Aug  6 21:52:34 main-menu[989]: INFO: Menu item 'save-logs' selected
Aug  6 21:53:08 kernel: [  218.089782] TCP: request_sock_TCP: Possible SYN flooding on port 80. Sending cookies.  Check SNMP counters.
Aug  6 21:53:25 kernel: [  234.906280] TCP: request_sock_TCP: Possible SYN flooding on port 80. Sending cookies.  Check SNMP counters.
-----------------------------------------------------------------------------


On Sat, Jul 30, 2016 at 7:23 PM, Martin Michlmayr <tbm@cyrius.com> wrote:
Mike, can you please give these instructions a go?  This is what I
intend to post to the mv2120 list.

--

Mike Thompson reported that Debian stretch (the upcoming Debian 9)
doesn't boot on the HP mv2120 anymore.  I don't know how many Debian
users are left who run Debian on their mv2120.  I gave away my device
several years ago.  Recently I bought an mv2120 from eBay in order to
debug this issue.

While I found a solution, it requires users to change a setting on their
device.  Please make sure to make this change, otherwise your device
will no longer boot when you upgrade to Debian 9.

The new settings are compatible with Debian 8 (jessie) and Debian 9
(stretch), so I suggest you make the changes now.

If you have serial console access to the mv2120, you can run some
commands in u-boot.  Simply interrupt the boot process by pressing a key
and type the following:

    setenv loadAddr 0x0600000
    setenv bootcmd 'bootext2 0,1:1,2 0x0600000 /boot/uImage /dev/sda /dev/sdb'
    saveenv

If you don't have a serial console, you can make the changes from within
Debian.  Run the following commands:

    cat >/etc/fw_env.config <<EOF
    /dev/mtd0           0x00000         0x1000     0x20000
    EOF

    fw_setenv loadAddr 0x0600000
    fw_setenv bootcmd "bootext2 0,1:1,2 0x0600000 /boot/uImage /dev/sda /dev/sdb"

This will create a config file so you can modify the u-boot environment
and use fw_setenv to update two boot variables.

Once you made the changes, upgrades to Debian 9 should work fine and you
can also use the Debian installer if you want to perform a new
installation.

Please note that Debian 9 will be the last release to support the HP
mv2120.

--

Note that the installer from
https://d-i.debian.org/daily-images/armel/daily/orion5x/network-console/hp/mv2120/netboot.img
will not boot right now with these settings.  However, you can change the
loadAddr to 0x0500000 and it should work.  I just commited a fix in Git so
it should work in a day or so with 0x0600000.

--
Martin Michlmayr
http://www.cyrius.com/

Reply to: