Bug#780164: [jessie daily 2015-03-09] [armhf] installation-report: Olimex A20-OLinuXino-LIME2
Package: installation-reports
Boot method: netboot image (loaded from a USB stick)
Image version: http://d-i.debian.org/daily-images/armhf/daily/netboot/
dated 09-Mar-2015 05:23
Date: 2015-03-09
Machine: Olimex A20-OLinuXino-LIME2
Processor: Allwinner A20 (2x Cortex A7)
Memory: 1GB
Console: serial console, 115200 baud
U-Boot: U-Boot 2014.10+dfsg1-4
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems: The installation was done to a 16GB Micro-SD card
using serial console (on the UART0 header) and worked without
problems; network (Gigabit ethernet) and the USB host ports work as
expected. Partitioning was done using the "guided partitioning, all
files in one partition" option.
Following is the output of dmesg on the system:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Olimex A20-OLinuXino-LIME2
[ 0.000000] Forcing write-allocate cache policy for SMP
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a197c0, node_mem_map eeff9000
[ 0.000000] DMA zone: 1520 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 9 pages/cpu @eefcf000 s12672 r8192 d16000 u36864
[ 0.000000] pcpu-alloc: s12672 r8192 d16000 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1016768K/1048576K available (6588K kernel code, 842K rwdata, 2236K rodata, 700K init, 397K bss, 31808K reserved, 270336K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc08a6480 (8826 kB)
.init : 0xc08a7000 - 0xc0956180 ( 701 kB)
.data : 0xc0958000 - 0xc0a2a808 ( 843 kB)
.bss : 0xc0a2a808 - 0xc0a8dcb4 ( 398 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000018] Switching to timer-based delay loop
[ 0.001000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.001427] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.001864] Console: colour dummy device 80x30
[ 0.001898] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001913] pid_max: default: 32768 minimum: 301
[ 0.002048] Security Framework initialized
[ 0.002117] AppArmor: AppArmor disabled by boot time parameter
[ 0.002126] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002209] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002224] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003190] Initializing cgroup subsys memory
[ 0.003224] Initializing cgroup subsys devices
[ 0.003266] Initializing cgroup subsys freezer
[ 0.003283] Initializing cgroup subsys net_cls
[ 0.003316] Initializing cgroup subsys blkio
[ 0.003340] Initializing cgroup subsys perf_event
[ 0.003355] Initializing cgroup subsys net_prio
[ 0.003445] CPU: Testing write buffer coherency: ok
[ 0.003494] ftrace: allocating 23607 entries in 70 pages
[ 0.039266] /cpus/cpu@0 missing clock-frequency property
[ 0.039300] /cpus/cpu@1 missing clock-frequency property
[ 0.039314] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.039552] Setting up static identity map for 0x405eb358 - 0x405eb3b0
[ 0.049149] CPU1: Booted secondary processor
[ 0.049202] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.049310] Brought up 2 CPUs
[ 0.049338] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.049345] CPU: All CPU(s) started in HYP mode.
[ 0.049350] CPU: Virtualization extensions available.
[ 0.050061] devtmpfs: initialized
[ 0.054414] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.060308] pinctrl core: initialized pinctrl subsystem
[ 0.060807] regulator-dummy: no parameters
[ 0.067004] NET: Registered protocol family 16
[ 0.067399] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.074831] No ATAGs?
[ 0.074883] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.074895] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.075051] EXYNOS: PMU not supported
[ 0.075910] Serial: AMBA PL011 UART driver
[ 0.094774] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.094805] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.095261] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[ 0.095348] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.095377] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.095391] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.095413] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.095425] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.095652] vcc3v0: 3000 mV
[ 0.095930] vcc3v3: 3300 mV
[ 0.096178] axp-ipsout: 5000 mV
[ 0.097548] vgaarb: loaded
[ 0.098122] usbcore: registered new interface driver usbfs
[ 0.098193] usbcore: registered new interface driver hub
[ 0.098439] usbcore: registered new device driver usb
[ 0.099091] media: Linux media interface: v0.10
[ 0.099162] Linux video capture interface: v2.00
[ 0.099268] pps_core: LinuxPPS API ver. 1 registered
[ 0.099277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.099308] PTP clock support registered
[ 0.100902] Switched to clocksource arch_sys_counter
[ 0.151320] NET: Registered protocol family 2
[ 0.152594] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.152685] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.152807] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.152969] TCP: reno registered
[ 0.152987] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153045] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153366] NET: Registered protocol family 1
[ 0.153440] PCI: CLS 0 bytes, default 64
[ 0.153981] Unpacking initramfs...
[ 1.093777] Freeing initrd memory: 11816K (cf475000 - cffff000)
[ 1.094293] kvm [1]: interrupt-controller@1c84000 IRQ25
[ 1.094615] kvm [1]: timer IRQ27
[ 1.094643] kvm [1]: Hyp mode initialized successfully
[ 1.095304] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 1.097308] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.097480] audit: initializing netlink subsys (disabled)
[ 1.097588] audit: type=2000 audit(1.084:1): initialized
[ 1.098825] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.098912] zbud: loaded
[ 1.099337] VFS: Disk quotas dquot_6.5.2
[ 1.099408] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.099670] msgmni has been set to 1480
[ 1.101523] alg: No test for stdrng (krng)
[ 1.101671] bounce: pool size: 64 pages
[ 1.101783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.102020] io scheduler noop registered
[ 1.102040] io scheduler deadline registered
[ 1.102199] io scheduler cfq registered (default)
[ 1.105541] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.107777] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.109921] console [ttyS0] disabled
[ 1.130109] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 1.876533] console [ttyS0] enabled
[ 1.880491] Serial: AMBA driver
[ 1.883992] Serial: IMX driver
[ 1.890913] mousedev: PS/2 mouse device common for all mice
[ 1.898130] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 1.904949] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 1.910478] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.916608] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.922698] usbcore: registered new interface driver usbhid
[ 1.928281] usbhid: USB HID core driver
[ 1.932958] TCP: cubic registered
[ 1.936381] NET: Registered protocol family 10
[ 1.941922] mip6: Mobile IPv6
[ 1.944954] NET: Registered protocol family 17
[ 1.949444] mpls_gso: MPLS GSO support
[ 1.953286] ThumbEE CPU extension supported.
[ 1.957586] Registering SWP/SWPB emulation handler
[ 1.963195] registered taskstats version 1
[ 1.968391] ahci-5v: 5000 mV
[ 1.971917] usb1-vbus: 5000 mV
[ 1.975537] usb2-vbus: 5000 mV
[ 1.979106] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:09 UTC (9)
[ 1.991690] PM: Hibernation image not present or could not be loaded.
[ 1.991730] usb2-vbus: disabling
[ 1.995045] usb1-vbus: disabling
[ 1.998289] ahci-5v: disabling
[ 2.001355] vcc3v3: disabling
[ 2.004320] vcc3v0: disabling
[ 2.008552] Freeing unused kernel memory: 700K (c08a7000 - c0956000)
[ 2.087186] systemd-udevd[61]: starting version 215
[ 2.094927] random: systemd-udevd urandom read with 0 bits of entropy available
[ 2.149901] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.156139] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 2.162503] SCSI subsystem initialized
[ 2.172995] libata version 3.00 loaded.
[ 2.193416] sunxi-mmc 1c0f000.mmc: base:0xf00b6000 irq:64
[ 2.230765] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.241095] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.248715] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 2.257405] mmc0: new high speed SDHC card at address 59b4
[ 2.264000] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.273061] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.284680] mmcblk0: mmc0:59b4 NCard 14.7 GiB
[ 2.292347] scsi0 : ahci_platform
[ 2.299400] mmcblk0: p1 p2 p3 < p5 >
[ 2.305703] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 2.318354] stmmaceth 1c50000.ethernet: no regulator found
[ 2.323983] stmmaceth 1c50000.ethernet: no reset control found
[ 2.330075] Ring mode enabled
[ 2.333189] No HW DMA feature register supported
[ 2.337751] Normal descriptors
[ 2.341097] TX Checksum insertion supported
[ 2.355756] libphy: stmmac: probed
[ 2.359250] eth0: PHY ID 001cc912 at 1 IRQ POLL (stmmac-0:01) active
[ 2.632946] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.712180] PM: Starting manual resume from disk
[ 2.716988] PM: Hibernation image partition 179:5 present
[ 2.716997] PM: Looking for hibernation image.
[ 2.718003] PM: Image not found (code -22)
[ 2.718017] PM: Hibernation image not present or could not be loaded.
[ 2.767897] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.339198] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 3.353195] systemd[1]: Detected architecture 'arm'.
[ 3.455259] systemd[1]: Inserted module 'autofs4'
[ 3.462236] systemd[1]: Set hostname to <debian>.
[ 3.992186] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.009916] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.018194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.025960] systemd[1]: Expecting device dev-ttyS0.device...
[ 4.041128] systemd[1]: Starting Remote File Systems (Pre).
[ 4.053053] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.059349] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.067657] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.075664] systemd[1]: Starting Paths.
[ 4.089088] systemd[1]: Reached target Paths.
[ 4.093751] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.117080] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.126642] systemd[1]: Starting Encrypted Volumes.
[ 4.141054] systemd[1]: Reached target Encrypted Volumes.
[ 4.146571] systemd[1]: Expecting device dev-disk-by\x2duuid-d1529c16\x2d0353\x2d44ad\x2d95e3\x2de878813ecad6.device...
[ 4.169063] systemd[1]: Expecting device dev-disk-by\x2duuid-febf97dd\x2d8972\x2d4ad0\x2d9a65\x2da55db023bb61.device...
[ 4.193050] systemd[1]: Starting Root Slice.
[ 4.229138] systemd[1]: Created slice Root Slice.
[ 4.234041] systemd[1]: Starting User and Session Slice.
[ 4.253099] systemd[1]: Created slice User and Session Slice.
[ 4.259002] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.273081] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.280155] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.293072] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.298930] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.313057] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.319091] systemd[1]: Starting Syslog Socket.
[ 4.333053] systemd[1]: Listening on Syslog Socket.
[ 4.338098] systemd[1]: Starting udev Control Socket.
[ 4.349064] systemd[1]: Listening on udev Control Socket.
[ 4.354622] systemd[1]: Starting udev Kernel Socket.
[ 4.369055] systemd[1]: Listening on udev Kernel Socket.
[ 4.374522] systemd[1]: Starting Journal Socket.
[ 4.389076] systemd[1]: Listening on Journal Socket.
[ 4.394280] systemd[1]: Starting System Slice.
[ 4.409080] systemd[1]: Created slice System Slice.
[ 4.414160] systemd[1]: Starting File System Check on Root Device...
[ 4.431908] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.449188] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.455922] systemd[1]: Starting system-getty.slice.
[ 4.469146] systemd[1]: Created slice system-getty.slice.
[ 4.474721] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 4.477543] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.495691] systemd[1]: Starting Load Kernel Modules...
[ 4.504540] systemd[1]: Mounting Huge Pages File System...
[ 4.513735] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.524035] systemd[1]: Starting udev Coldplug all Devices...
[ 4.535505] systemd[1]: Mounting Debug File System...
[ 4.551023] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.558521] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.572586] systemd[1]: Starting Journal Service...
[ 4.585202] systemd[1]: Started Journal Service.
[ 4.947304] random: nonblocking pool is initialized
[ 4.975157] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 5.074711] systemd-udevd[149]: starting version 215
[ 5.362548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.373868] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 5.406984] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.411405] ehci-platform: EHCI generic platform driver
[ 5.411776] ehci-platform 1c14000.usb: EHCI Host Controller
[ 5.412345] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 5.412490] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 5.447585] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 5.467961] ohci-platform: OHCI generic platform driver
[ 5.482605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.489528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.496775] usb usb1: Product: EHCI Host Controller
[ 5.501668] usb usb1: Manufacturer: Linux 3.16.0-4-armmp-lpae ehci_hcd
[ 5.508207] usb usb1: SerialNumber: 1c14000.usb
[ 5.518477] hub 1-0:1.0: USB hub found
[ 5.525435] hub 1-0:1.0: 1 port detected
[ 5.604845] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 5.633304] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 2
[ 5.653308] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 5.717359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.724313] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.731691] usb usb2: Product: Generic Platform OHCI controller
[ 5.737754] usb usb2: Manufacturer: Linux 3.16.0-4-armmp-lpae ohci_hcd
[ 5.744397] usb usb2: SerialNumber: 1c14400.usb
[ 5.750018] hub 2-0:1.0: USB hub found
[ 5.753943] hub 2-0:1.0: 1 port detected
[ 5.759106] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 5.765272] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
[ 5.773512] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 5.793053] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 5.803625] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.810545] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.817874] usb usb3: Product: EHCI Host Controller
[ 5.822829] usb usb3: Manufacturer: Linux 3.16.0-4-armmp-lpae ehci_hcd
[ 5.829407] usb usb3: SerialNumber: 1c1c000.usb
[ 5.835027] hub 3-0:1.0: USB hub found
[ 5.838969] hub 3-0:1.0: 1 port detected
[ 5.843893] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 5.851856] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 5.860034] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ 5.862539] Adding 701436k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:701436k SSFS
[ 5.933325] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.940207] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.947596] usb usb4: Product: Generic Platform OHCI controller
[ 5.947604] usb usb4: Manufacturer: Linux 3.16.0-4-armmp-lpae ohci_hcd
[ 5.947611] usb usb4: SerialNumber: 1c1c400.usb
[ 5.948719] hub 4-0:1.0: USB hub found
[ 5.948769] hub 4-0:1.0: 1 port detected
[ 6.068805] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
[ 6.103075] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[ 6.202081] systemd-journald[128]: Received request to flush runtime journal from PID 1
[ 6.491997] No MAC Management Counters available
[ 7.172853] RPC: Registered named UNIX socket transport module.
[ 7.178862] RPC: Registered udp transport module.
[ 7.183600] RPC: Registered tcp transport module.
[ 7.188323] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.213649] FS-Cache: Loaded
[ 7.255848] FS-Cache: Netfs 'nfs' registered for caching
[ 7.313143] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.477365] stmmaceth 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
Reply to: