--- Begin Message ---
Package: installation-reports
Boot method: USB Flash
Image version: debian-jessie-DI-rc1-amd64-DVD-1.iso
Date: 2/19/2015
Machine: Lenovo Thinkpad L420
Processor: Core i5
Memory: 4GB
Partitions:
/dev/sda1 2048 2459647 2457600 1.2G 7 HPFS/NTFS/exFAT
/dev/sda2 2459648 197772147 195312500 93.1G 7 HPFS/NTFS/exFAT
/dev/sda3 602961920 625139711 22177792 10.6G 7 HPFS/NTFS/exFAT
/dev/sda4 197773310 602961919 405188610 193.2G 5 Extended
/dev/sda5 197773312 197967871 194560 95M 83 Linux
/dev/sda6 197969920 213592063 15622144 7.5G 83 Linux
/dev/sda7 213594112 602961919 389367808 185.7G 83 Linux
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Lenovo Device [17aa:21dd]
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
Subsystem: Lenovo Device [17aa:21dd]
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4)
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Lenovo Device [17aa:21dd]
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
Subsystem: Intel Corporation Device [8086:1311]
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Lenovo Device [17aa:21dd]
09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
Subsystem: Lenovo Device [17aa:21dd]
Kernel driver in use: r8169
Install
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O] (after BIOS update)
Detect network card: [E]
Configure network: [O]
Detect CD: [O]
Load installer modules: [ ]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Network card detection required firmware rtl_nic and iwlwifi. Those were
provided through another USB flash drive, but the installer made it look
like those files weren't available. Looking into dmesg showed that the
installer *did* find the files, but firmware loading failed, although at
least eth0 still did work after that.
Wifi:
[ 62.050246] cfg80211: Calling CRDA to update world regulatory domain
[ 62.050465] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 62.050476] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 62.050843] r8169 0000:09:00.0: irq 41 for MSI/MSI-X
[ 62.050913] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 62.050915] Copyright(c) 2003- 2014 Intel Corporation
[ 62.051068] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 62.051105] r8169 0000:09:00.0 eth0: RTL8168d/8111d at 0xffffc90000670000, e8:9a:8f:de:ac:d2, XID 083000c0 IRQ 41
[ 62.051108] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 62.051262] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
[ 62.051531] iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-6000g2a-6.ucode (-2)
[ 62.051533] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
[ 62.051534] iwlwifi 0000:03:00.0: Falling back to user helper
[ 62.061418] iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-6000g2a-5.ucode (-2)
[ 62.061422] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
[ 62.061424] iwlwifi 0000:03:00.0: Falling back to user helper
[ 62.061594] iwlwifi 0000:03:00.0: no suitable firmware found!
Ethernet:
[ 69.461739] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 69.461756] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 69.462214] r8169 0000:09:00.0: irq 41 for MSI/MSI-X
[ 69.462581] r8169 0000:09:00.0 eth0: RTL8168d/8111d at 0xffffc90000670000, e8:9a:8f:de:ac:d2, XID 083000c0 IRQ 41
[ 69.462588] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 69.493668] r8169 0000:09:00.0: firmware: failed to load rtl_nic/rtl8168d-2.fw (-2)
[ 69.493677] r8169 0000:09:00.0: Direct firmware load failed with error -2
[ 69.493680] r8169 0000:09:00.0: Falling back to user helper
[ 69.494436] r8169 0000:09:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-12)
[ 69.507772] r8169 0000:09:00.0 eth0: link down
[ 69.507827] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
The real showstopper however was setting up crypt partitions. First off,
it seems like you *still* cannot remove a crypt partition - if you make
an error (like forgetting /boot), you have to restart the whole
installer! That already bothered me with Debian 7, and a quick search
shows this has bothered other people as well for many, many
years. *Please* fix this.
So after restarting and "not forgetting /boot", I configured sda6 and
sda7 to be crypt partitions and succesfully set up sda6 to be encrypted
swap. When trying to set up sda6 and the installer re-detects the
partitions, it hangs; dmesg shows that parted-server segfaulted:
[ 163.104745] Adding 7811068k swap on /dev/mapper/sda6_crypt. Priority:-1 extents:1 across:7811068k FS
[ 192.830604] parted_server[11405]: segfault at 8 ip 000000000040b4b1 sp 00007fff18775430 error 4 in parted_server[400000+12000]
This happened on a second try as well.
--- End Message ---
--- Begin Message ---
Source: partman-base
Source-Version: 181
We believe that the bug you reported is fixed in the latest version of
partman-base, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 778773@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Cyril Brulebois <kibi@debian.org> (supplier of updated partman-base package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Wed, 04 Mar 2015 17:30:29 +0100
Source: partman-base
Binary: partman-base partman-utils
Architecture: source
Version: 181
Distribution: unstable
Urgency: high
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Cyril Brulebois <kibi@debian.org>
Description:
partman-base - Partition the storage devices (partman) (udeb)
partman-utils - Utilities related to partitioning (udeb)
Closes: 778773
Changes:
partman-base (181) unstable; urgency=high
.
* Fix command_get_file_system() to correctly look at fstype and not at
part->fs_type, fixing possible NULL pointer dereferences. Thanks to
the many reporters, to Steve McIntyre for the initial backtrace, and
to Lennart Sorensen for the patch! (Closes: #778773)
Checksums-Sha1:
4e62813e303cac0fb5ae3771972b4e25dddbb468 1841 partman-base_181.dsc
4f5351c0255c64e3d99f6a22e06e298e500579c0 172740 partman-base_181.tar.xz
Checksums-Sha256:
ae5c48a86b52ec7f86ef74e5783256b52434986abc440e091e3b6f08e220f371 1841 partman-base_181.dsc
5d8b8f82fa928c90ce2bfdbb25563d0b542bef1dd7b8a2222343edbc777ea78f 172740 partman-base_181.tar.xz
Files:
81c9e85c3e0c39f3271c6617232da5f4 1841 debian-installer standard partman-base_181.dsc
13043d1dddcea4e9590218d92023faff 172740 debian-installer standard partman-base_181.tar.xz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAEBAgAGBQJU9zUhAAoJEP+RSvDCs1UgdyMP/j7KhDyjfsPzHKcSn6nTzkhk
ZKcj5Kgw8pHropDU40/jm4qHwuBrZF2aexg1xOapkEshUs7BqdsJ6urUANDJtB80
xpcIfSYco5c17W/Dg4CxZGf0HnZ2qlrc3Al1dhAeDhOWUfiWfNH1KcBSUojHREC2
TTq4ztTADeBMbc7hXD+nSYRbO+F6UjwXYHglQGu6jjDtujWM3OrITdGRmxRuK02T
GCZhx4zmyJtch92pWBFr2INpbkmaIVWPOEIBHvLKAu+GSwfuUkYgh9jXNmgf3O/g
Eudh2/rtVcp9fAF9NOmnuOYiBaI4aRZ+dua4uRlChbiKYhkFv1XstWooc8y91g1j
aZKLF7EOqwCxHVoZfMMQto+irLRQMIg4HR9f9OARQHccrrR4gAqn79upGaJNDOOp
AlCivpM+TTWyw36jID9BjuWZ+yzGlaTV5khyO9pd5rDk0i7CjORl4H6N6zcxDdkF
IDHuUxt2lf0bzZzHaGgpnF95BP63m32zIWI5WwRc3EA77J1eyVenOSD2ylvbzVUT
FresgPAny3KBqLatZpVdAZNfs6bSIDjNS+XNErV5KgA0SjO2XnDhjWoHjSnXuNZT
8TztglXmD4sntBwieDk97r9xVCkP6RYH/wgrp4szBgEADE0sK8psjQVKUBbwap7t
Ct32dIOkq/3CsycKYpbh
=v1qg
-----END PGP SIGNATURE-----
--- End Message ---