Bug#778773: Jessie RC1 Installer parted server segfault
Package: installation-reports
Followup-For: Bug #778773
On Sun, Mar 01, 2015 at 04:37:00PM +0100, Kim Christensen wrote:
> But when applying the LVM layout the installer stops at 81% of "Detecting
> file systems...", and dmesg show partman has segfaulted:
>
> [ 1058.507210] Adding 7811068k swap on /dev/mapper/sde5_crypt. Priority:-1 extents:1 across:7811068k FS
> [ 1383.769684] parted_server[7322]: segfault at 8 ip 000000000040b4b1 sp 00007fffff6d9e40 error 4 in parted_server[400000+12000]
Additional information:
I managed to trigger the parted_server segfault by just creating and
activating a swap partition inside a cryptdisk container on a non-RAID
partition (/dev/sde5 in partition map shown below). No LVM used in
this attempt.
> Partitions:
>
> Disk 1
>
> /dev/sdc1 * 2048 2099199 2097152 1G fd Linux raid autodetect
> /dev/sdc2 2099200 232785919 230686720 110G fd Linux raid autodetect
>
> Disk 2
>
> /dev/sde1 * 2048 2099199 2097152 1G fd Linux raid autodetect
> /dev/sde2 2099200 232785919 230686720 110G fd Linux raid autodetect
> /dev/sde3 232785920 547358719 314572800 150G fd Linux raid autodetect
> /dev/sde4 547360766 562982911 15622146 7.5G 5 Extended
> /dev/sde5 547360768 562982911 15622144 7.5G 83 Linux
The partition used for this swap cryptdisk is extended and resides on
the same disk as previously mentioned RAID partitions, if that
matters in any way..
-- kchr
Reply to: