Your message dated Mon, 04 Feb 2013 00:33:17 +0100 with message-id <1359934397.4538.6.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#699691: installation-report: Wheezy beta set up on FSC Futro S450 has caused the Debian Bug report #699691, regarding installation-report: Wheezy beta set up on FSC Futro S450 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 699691: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=699691 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-report: Wheezy beta set up on FSC Futro S450
- From: Andreas Glaeser <bugs.andreas.glaeser@freenet.de>
- Date: Sun, 3 Feb 2013 17:36:28 +0100
- Message-id: <[🔎] 20130203173628.6957daa6@osrdii.lokal>
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Package: installation-reports Version: 2.49 Severity: wishlist Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** - -- Package-specific info: Boot method: USB Image version: http://caesar.acc.umu.se/cdimage/weekly-builds/i386/iso-cd/debian-testing-i386-CD-1.iso, 2013-01-28 Date: 2013-02-03, about 15.00 h and later, i.e. afternoon Machine: FSC Futro S450 Partitions: Filesystem Type 1K-blocks Used Available Use% Mounted on rootfs rootfs 14417392 3750376 9934652 28% / udev devtmpfs 10240 0 10240 0% /dev tmpfs tmpfs 83796 640 83156 1% /run /dev/disk/by-uuid/853fed50-487d-4440-bb5f-10797af2040c ext4 14417392 3750376 9934652 28% / tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 360300 84 360216 1% /run/shm Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [o] Detect network card: [o] Configure network: [o] Detect CD: [o] Load installer modules: [o] Clock/timezone setup: [o] User/password setup: [o] Detect hard drives: [o] Partition hard drives: [o] Install base system: [o] Install tasks: [o] Install boot loader: [o] Overall install: [o] Comments/Problems: It was a default-installation, but with any server-packages deselected in tasksel. It went fine, but it seems to be the default for GNOME3, that it will start up in the lowest possible resolution and that the software-rasterizer is used for 3D-rendering, so it is in fallback-mode, although the RADEON driver should provide DRI, at least it probably did once, I think. I attach Xorg.0.log. In the GNOME-display-settings it was not possible to select a different resolution than the low default, so I manually installed 'xfce4' and 'xfce4-goodies' in order to use this. XFCE-screen-settings were able to select higher screen-resolutions and lower vertical refresh-rates, but still produce faulty output instead of a solid-colour desktop-background, i.e. there is a 640x480-box visible in the upper left corner. This should probably be reported and filed against 'xserver-xorg-video-radeon' against GNOME3, or maybe against 'xorg' itself ? Going to see about RADEON-configuration, because there is no proprietary fglrx-legacy driver in debian and not everybody wants to use proprietary drivers, because even if available for a certain platform, they are sometimes not the best choice. Also I feel that the Wheezy stable release approaches and the default Gnome3-desktop still starts in fallback-mode by default in most cases, but possibly this is selective perception on my side. - -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="7.0 (wheezy) - installer build 20130128-00:08" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== uname -a: Linux f-s450 3.2.0-4-486 #1 Debian 3.2.35-2 i686 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge [1002:7910] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:111d] lspci -knn: 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] lspci -knn: 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) [1002:4387] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) [1002:4388] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci - -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) [1002:4389] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) [1002:438a] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) [1002:438b] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) [1002:4386] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 14) lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE [1002:438c] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: Kernel driver in use: pata_atiixp lspci -knn: 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:111e] lspci -knn: 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge [1002:438d] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:10d1] lspci -knn: 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] lspci -knn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] lspci -knn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] lspci - -knn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] lspci -knn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] lspci -knn: 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS690M [Radeon X1200 Series] [1002:791f] lspci -knn: Subsystem: Fujitsu Technology Solutions Device [1734:111d] lspci -knn: 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) lspci - -knn: Subsystem: Fujitsu Technology Solutions Device [1734:111c] lspci -knn: Kernel driver in use: r8169 usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 01 Device 02: Rainbow Line [058f:6387] usb-list: Level 01 Parent 01 Port 01 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Intenso usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage usb-list: usb-list: Bus 02 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 03 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 04 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 04 Device 02: USB-PS/2 Optical Mouse [046d:c03d] usb-list: Level 01 Parent 01 Port 01 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Logitech usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 02 Driver usbhid usb-list: usb-list: Bus 05 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 05 Device 02: Hub in Apple Extended USB Keyboard [05ac:1002] usb-list: Level 01 Parent 01 Port 01 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Mitsumi Electric usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 05 Device 03: Apple Extended USB Keyboard [05ac:0205] usb-list: Level 02 Parent 02 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Mitsumi Electric usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 01 Driver usbhid usb-list: Interface 01: Class 03(HID ) Subclass 00 Protocol 00 Driver usbhid usb-list: usb-list: Bus 06 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub lsmod: Module Size Used by lsmod: fuse 51989 0 lsmod: ufs 57656 0 lsmod: qnx4 12992 0 lsmod: ntfs 161748 0 lsmod: reiserfs 167423 0 lsmod: efivars 17508 0 lsmod: dm_mod 57438 0 lsmod: md_mod 81567 0 lsmod: xfs 511016 0 lsmod: jfs 131002 0 lsmod: ext4 298201 1 lsmod: crc16 12327 1 ext4 lsmod: jbd2 51584 1 ext4 lsmod: ext3 133836 0 lsmod: jbd 42496 1 ext3 lsmod: btrfs 471554 0 lsmod: crc32c 12576 1 lsmod: libcrc32c 12394 1 btrfs lsmod: zlib_deflate 21318 1 btrfs lsmod: vfat 17117 0 lsmod: fat 40365 1 vfat lsmod: ext2 49804 0 lsmod: mbcache 12938 3 ext2,ext3,ext4 lsmod: r8169 41957 0 lsmod: mii 12595 1 r8169 lsmod: nls_utf8 12416 0 lsmod: isofs 30544 0 lsmod: thermal 13103 0 lsmod: fan 12594 0 lsmod: thermal_sys 17752 2 fan,thermal lsmod: usbhid 31704 0 lsmod: hid 60152 1 usbhid lsmod: sg 21589 0 lsmod: sd_mod 35425 3 lsmod: usb_storage 35245 0 lsmod: crc_t10dif 12332 1 sd_mod lsmod: ata_generic 12439 0 lsmod: pata_atiixp 12723 2 lsmod: libata 121252 2 pata_atiixp,ata_generic lsmod: scsi_mod 135542 4 libata,usb_storage,sd_mod,sg lsmod: ohci_hcd 22264 0 lsmod: ehci_hcd 35684 0 lsmod: usbcore 100644 5 ehci_hcd,ohci_hcd,usb_storage,usbhid lsmod: usb_common 12338 1 usbcore df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 83840 48 83792 0% /run df: tmpfs 419180 0 419180 0% /dev df: /dev/sda1 14417392 3437288 10247740 25% /target df: /dev/sda1 14417392 3437288 10247740 25% /dev/.static/dev df: tmpfs 419180 0 419180 0% /target/dev free: total used free shared buffers free: Mem: 838364 730084 108280 0 143036 free: -/+ buffers: 587048 251316 free: Swap: 963580 16 963564 /proc/cmdline: vga=788 initrd=/install.386/initrd.gz -- quiet BOOT_IMAGE=/install.386/vmlinuz /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : AuthenticAMD /proc/cpuinfo: cpu family : 15 /proc/cpuinfo: model : 124 /proc/cpuinfo: model name : AMD Sempron(tm) Processor 800MHz /proc/cpuinfo: stepping : 2 /proc/cpuinfo: cpu MHz : 799.893 /proc/cpuinfo: cache size : 512 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 1 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow extd_apicid pni cx16 lahf_lm svm extapic cr8_legacy 3dnowprefetch lbrv /proc/cpuinfo: bogomips : 1599.78 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual /proc/cpuinfo: power management: ts fid vid ttp tm stc 100mhzsteps /proc/cpuinfo: /proc/ioports: 0000-0cf7 : PCI Bus 0000:00 /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:14.1 /proc/ioports: 0170-0177 : pata_atiixp /proc/ioports: 01f0-01f7 : 0000:00:14.1 /proc/ioports: 01f0-01f7 : pata_atiixp /proc/ioports: 0376-0376 : 0000:00:14.1 /proc/ioports: 0376-0376 : pata_atiixp /proc/ioports: 03c0-03df : vesafb /proc/ioports: 03f6-03f6 : 0000:00:14.1 /proc/ioports: 03f6-03f6 : pata_atiixp /proc/ioports: 040b-040b : pnp 00:01 /proc/ioports: 04d0-04d1 : pnp 00:01 /proc/ioports: 04d6-04d6 : pnp 00:01 /proc/ioports: 0600-067f : pnp 00:01 /proc/ioports: 087f-087f : pnp 00:01 /proc/ioports: 0c00-0c01 : pnp 00:01 /proc/ioports: 0c14-0c14 : pnp 00:01 /proc/ioports: 0c50-0c52 : pnp 00:01 /proc/ioports: 0c6c-0c6c : pnp 00:01 /proc/ioports: 0c6f-0c6f : pnp 00:01 /proc/ioports: 0cd0-0cd1 : pnp 00:01 /proc/ioports: 0cd2-0cd3 : pnp 00:01 /proc/ioports: 0cd4-0cd5 : pnp 00:01 /proc/ioports: 0cd6-0cd7 : pnp 00:01 /proc/ioports: 0cd8-0cdf : pnp 00:01 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 0d00-ffff : PCI Bus 0000:00 /proc/ioports: 1000-1fff : PCI Bus 0000:02 /proc/ioports: 8000-807f : pnp 00:01 /proc/ioports: 8000-8003 : ACPI PM1a_EVT_BLK /proc/ioports: 8004-8005 : ACPI PM1a_CNT_BLK /proc/ioports: 8008-800b : ACPI PM_TMR /proc/ioports: 8020-8027 : ACPI GPE0_BLK /proc/ioports: 8100-81fe : pnp 00:01 /proc/ioports: 8104-8107 : ACPI PM1b_EVT_BLK /proc/ioports: 8200-8200 : ACPI PM2_CNT_BLK /proc/ioports: 8400-840f : 0000:00:14.0 /proc/ioports: 8410-841f : 0000:00:14.1 /proc/ioports: 8410-841f : pata_atiixp /proc/ioports: 9000-9fff : PCI Bus 0000:01 /proc/ioports: 9000-90ff : 0000:01:05.0 /proc/ioports: a000-afff : PCI Bus 0000:08 /proc/ioports: a000-a0ff : 0000:08:00.0 /proc/ioports: a000-a0ff : r8169 /proc/ioports: fe00-fe00 : pnp 00:01 /proc/iomem: 00000000-0000ffff : reserved /proc/iomem: 00010000-0009dbff : System RAM /proc/iomem: 0009dc00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : PCI Bus 0000:00 /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000cd9ff : Video ROM /proc/iomem: 000ce000-000fffff : reserved /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-33ecffff : System RAM /proc/iomem: 01000000-012870ab : Kernel code /proc/iomem: 012870ac-013cc0bf : Kernel data /proc/iomem: 0143e000-014bafff : Kernel bss /proc/iomem: 33ed0000-33ee0fff : ACPI Tables /proc/iomem: 33ee1000-33ee1fff : ACPI Non-volatile Storage /proc/iomem: 33ee2000-3fffffff : reserved /proc/iomem: 40000000-febfffff : PCI Bus 0000:00 /proc/iomem: 40000000-400fffff : PCI Bus 0000:08 /proc/iomem: 40100000-402fffff : PCI Bus 0000:02 /proc/iomem: 40300000-404fffff : PCI Bus 0000:02 /proc/iomem: cfd00000-cfefffff : PCI Bus 0000:01 /proc/iomem: cfdf0000-cfdfffff : 0000:01:05.0 /proc/iomem: cfe00000-cfefffff : 0000:01:05.0 /proc/iomem: d0000000-dfffffff : PCI Bus 0000:01 /proc/iomem: d0000000-dfffffff : 0000:01:05.0 /proc/iomem: d0000000-d0ffffff : vesafb /proc/iomem: e0000000-efffffff : reserved /proc/iomem: e0000000-efffffff : pnp 00:01 /proc/iomem: e0000000-e12fffff : PCI MMCONFIG 0000 [bus 00-12] /proc/iomem: f0200000-f0203fff : 0000:00:14.2 /proc/iomem: f0204000-f0204fff : 0000:00:13.0 /proc/iomem: f0204000-f0204fff : ohci_hcd /proc/iomem: f0205000-f0205fff : 0000:00:13.1 /proc/iomem: f0205000-f0205fff : ohci_hcd /proc/iomem: f0206000-f0206fff : 0000:00:13.2 /proc/iomem: f0206000-f0206fff : ohci_hcd /proc/iomem: f0207000-f0207fff : 0000:00:13.3 /proc/iomem: f0207000-f0207fff : ohci_hcd /proc/iomem: f0208000-f0208fff : 0000:00:13.4 /proc/iomem: f0208000-f0208fff : ohci_hcd /proc/iomem: f020a000-f020a0ff : 0000:00:13.5 /proc/iomem: f020a000-f020a0ff : ehci_hcd /proc/iomem: f0300000-f03fffff : PCI Bus 0000:08 /proc/iomem: f0300000-f030ffff : 0000:08:00.0 /proc/iomem: f0300000-f030ffff : r8169 /proc/iomem: f0310000-f0310fff : 0000:08:00.0 /proc/iomem: f0310000-f0310fff : r8169 /proc/iomem: f0320000-f032ffff : 0000:08:00.0 /proc/iomem: fec00000-fec0ffff : reserved /proc/iomem: fec00000-fec003ff : IOAPIC 0 /proc/iomem: fed00000-fedfffff : PCI Bus 0000:00 /proc/iomem: fed00000-fed003ff : HPET 2 /proc/iomem: fee00000-fee00fff : Local APIC /proc/iomem: fee00000-fee00fff : reserved /proc/iomem: fff80000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 18212 IO-APIC-edge timer /proc/interrupts: 1: 3 IO-APIC-edge i8042 /proc/interrupts: 8: 38 IO-APIC-edge rtc0 /proc/interrupts: 9: 0 IO-APIC-fasteoi acpi /proc/interrupts: 12: 3 IO-APIC-edge i8042 /proc/interrupts: 14: 258592 IO-APIC-edge pata_atiixp /proc/interrupts: 15: 0 IO-APIC-edge pata_atiixp /proc/interrupts: 16: 1 IO-APIC-fasteoi ohci_hcd:usb2 /proc/interrupts: 17: 445 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb5 /proc/interrupts: 18: 26 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb6 /proc/interrupts: 19: 72117 IO-APIC-fasteoi ehci_hcd:usb1 /proc/interrupts: 42: 551421 PCI-MSI-edge eth0 /proc/interrupts: NMI: 144 Non-maskable interrupts /proc/interrupts: LOC: 384498 Local timer interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: PMI: 144 Performance monitoring interrupts /proc/interrupts: IWI: 0 IRQ work interrupts /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 838364 kB /proc/meminfo: MemFree: 108280 kB /proc/meminfo: Buffers: 143036 kB /proc/meminfo: Cached: 509992 kB /proc/meminfo: SwapCached: 16 kB /proc/meminfo: Active: 300200 kB /proc/meminfo: Inactive: 336684 kB /proc/meminfo: Active(anon): 708 kB /proc/meminfo: Inactive(anon): 21452 kB /proc/meminfo: Active(file): 299492 kB /proc/meminfo: Inactive(file): 315232 kB /proc/meminfo: Unevictable: 38272 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 838364 kB /proc/meminfo: LowFree: 108280 kB /proc/meminfo: SwapTotal: 963580 kB /proc/meminfo: SwapFree: 963564 kB /proc/meminfo: Dirty: 1296 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 22136 kB /proc/meminfo: Mapped: 2248 kB /proc/meminfo: Shmem: 32 kB /proc/meminfo: Slab: 44336 kB /proc/meminfo: SReclaimable: 36012 kB /proc/meminfo: SUnreclaim: 8324 kB /proc/meminfo: KernelStack: 472 kB /proc/meminfo: PageTables: 348 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 1382760 kB /proc/meminfo: Committed_AS: 27332 kB /proc/meminfo: VmallocTotal: 181432 kB /proc/meminfo: VmallocUsed: 9508 kB /proc/meminfo: VmallocChunk: 171300 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/meminfo: DirectMap4k: 289600 kB /proc/meminfo: DirectMap4M: 561152 kB /proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c03d Version=0110 /proc/bus/input/devices: N: Name="Logitech USB-PS/2 Optical Mouse" /proc/bus/input/devices: P: Phys=usb-0000:00:13.2-2/input0 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=mouse0 /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=17 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0 /proc/bus/input/devices: B: REL=103 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=0205 Version=0110 /proc/bus/input/devices: N: Name="Mitsumi Electric Apple Extended USB Keyboard" /proc/bus/input/devices: P: Phys=usb-0000:00:13.3-2.1/input0 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input1 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=sysrq kbd /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=1f /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=0205 Version=0110 /proc/bus/input/devices: N: Name="Mitsumi Electric Apple Extended USB Keyboard" /proc/bus/input/devices: P: Phys=usb-0000:00:13.3-2.1/input1 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2.1/5-2.1:1.1/input/input2 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=13 /proc/bus/input/devices: B: KEY=10000 17a 840c000 e0000 0 0 0 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: - -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:3.1.9-6 ii reportbug 6.4.3 installation-report suggests no packages. - -- no debconf information -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAlEOkgwACgkQ5+rBHyUt5wuTIQCeJXbXnHp1PB6mJ/+jGQokuoex 1fMAn2DAe+ZeVLf4m68MGGR53sUQgFEH =0BUc -----END PGP SIGNATURE-----Attachment: Xorg.0.log.gz
Description: GNU Zip compressed data
--- End Message ---
--- Begin Message ---
- To: 699691-done@bugs.debian.org
- Subject: Re: Bug#699691: installation-report: Wheezy beta set up on FSC Futro S450
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 04 Feb 2013 00:33:17 +0100
- Message-id: <1359934397.4538.6.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 20130203173628.6957daa6@osrdii.lokal>
- References: <[🔎] 20130203173628.6957daa6@osrdii.lokal>
On Sun, 2013-02-03 at 17:36 +0100, Andreas Glaeser wrote: [...] > Comments/Problems: > > It was a default-installation, but with any server-packages deselected in tasksel. > It went fine, but it seems to be the default for GNOME3, that it will start up in the > lowest possible resolution and that the software-rasterizer is used for 3D-rendering, so > it is in fallback-mode, although the RADEON driver should provide DRI, [...] This tells me you didn't install the firmware for radeon. Without that, it can't (reliably) do anything. Ben. -- Ben Hutchings Everything should be made as simple as possible, but not simpler. - Albert EinsteinAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---