Package: installation-reports
Boot method: Cd "debian-wheezy-DI-b4-amd64-netinst.iso".
Image version: http://cdimage.debian.org/cdimage/wheezy_di_beta4/amd64/iso-cd/debian-wheezy-DI-b4-amd64-netinst.iso
Date: Friday 11 January 2013.
Machine: Tested on VirtualBox and a Dell Optiplex 960 and a Dell PowerEdge R210.
Processor:
Memory:
Partitions: <df -Tl ; mais nous préférons la table des partitions>
Sys. fich. Type 1K-blocks Util. Disponible Uti% Monté sur
rootfs rootfs 19223252 1100720 17146048 7% /
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 37988 244 37744 1% /run
/dev/mapper/vglocal-slash ext4 19223252 1100720 17146048 7% /
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 75960 0 75960 0% /run/shm
/dev/sda1 ext4 93207 23165 65230 27% /boot
fdisk -l
Disque /dev/sda : 107.4 Go, 107374182400 octets
255 têtes, 63 secteurs/piste, 13054 cylindres, total 209715200 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x0004cbc3
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 2048 194559 96256 83 Linux
/dev/sda2 194560 209713151 104759296 8e LVM Linux
Disque /dev/mapper/vglocal-slash : 20.0 Go, 19998441472 octets
255 têtes, 63 secteurs/piste, 2431 cylindres, total 39059456 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000
Disque /dev/mapper/vglocal-swap : 998 Mo, 998244352 octets
255 têtes, 63 secteurs/piste, 121 cylindres, total 1949696 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000
Résultat de lspci -knn (ou lspci -nn) :
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c]
00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02)
Installation du système de base :
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Hi,
It seems there is a problem with partman and LVM.
I created a VirtualBox machine with a 107.4 GB hard drive (sparce file).
In the first place, I created 3 masters partitions with partman.
- /dev/sda1/ as /boot in ext4 - 98.6 MB
- /dev/sda2 as LVM partition - 50 GB
- /dev/sda3 as LVM partition - 57.3 GB
Next, I set up LVM and I created a VG with /dev/sda2.
I realised that /dev/sda3 is useless to me, so i deleted it.
Next, I deleted my VG and /dev/sda2. I created a new /dev/sda2 partition - 107.3 GB as LVM partition.
When I tried to configure LVM, it show /dev/sda2 with 50000 MB.
I should see the new size of my /dev/sda2.
I made an other VM with the same settings, and I found that if I made a LVM by mistake, the only way to display the correct size of /dev/sda2 is to recreate a default partition for /dev/sda.
I hope everything I said can help.
I can provide screenshot if you prefer.
Have a nice day
Benoît