Bug#633620: Info received (Bug#633620: installation-report: espeakup amdk8 wheezy to sid)
Jude DaShiell, le Tue 12 Jul 2011 06:32:56 -0400, a écrit :
> http://www.shellworld.net/~jdashiel/dmesg.log has the current dmesg
> output. A little over 50k so I put it on my web page.
50k is not a problem, so attaching it, so it's not lost.
Samuel
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-2-686-pae (Debian 2.6.39-3) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 03:48:49 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: /KN1 Lite, BIOS 6.00 PG 01/06/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f36c0] f36c0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36e46000 - 3771b000
[ 0.000000] ACPI: RSDP 000f75b0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 3fee3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fee30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fee3180 06472 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fee0000 00040
[ 0.000000] ACPI: SSDT 3fee9700 000F7 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: SRAT 3fee9840 00090 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: MCFG 3fee9940 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3fee9640 00072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 132MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fee0
[ 0.000000] On node 0 totalpages: 261743
[ 0.000000] free_area_init_node: node 0, pgdat c14187c0, node_mem_map f6646200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 266 pages used for memmap
[ 0.000000] HighMem zone: 33752 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s30976 r0 d22272 u1048576
[ 0.000000] pcpu-alloc: s30976 r0 d22272 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae root=UUID=f5f55f19-4aaf-4c92-a74b-9f923291661d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003fee0)
[ 0.000000] Memory: 1023496k/1047424k available (2784k kernel code, 23476k reserved, 1435k data, 440k init, 136072k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1420000 - 0xc148e000 ( 440 kB)
[ 0.000000] .data : 0xc12b8340 - 0xc141f240 (1435 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b8340 (2784 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2211.582 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4423.16 BogoMIPS (lpj=8846328)
[ 0.008010] pid_max: default: 32768 minimum: 301
[ 0.008055] Security Framework initialized
[ 0.008059] SELinux: Disabled at boot.
[ 0.008079] Mount-cache hash table entries: 512
[ 0.008324] Initializing cgroup subsys ns
[ 0.008327] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008330] Initializing cgroup subsys cpuacct
[ 0.008353] Initializing cgroup subsys memory
[ 0.008366] Initializing cgroup subsys devices
[ 0.008368] Initializing cgroup subsys freezer
[ 0.008370] Initializing cgroup subsys net_cls
[ 0.008373] Initializing cgroup subsys blkio
[ 0.008400] mce: CPU supports 5 MCE banks
[ 0.008678] SMP alternatives: switching to UP code
[ 0.013078] ACPI: Core revision 20110316
[ 0.016068] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016373] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.057347] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Brought up 1 CPUs
[ 0.060003] Total of 1 processors activated (4423.16 BogoMIPS).
[ 0.060003] devtmpfs: initialized
[ 0.060003] PM: Registering ACPI NVS region at 3fee0000 (12288 bytes)
[ 0.060003] print_constraints: dummy:
[ 0.060003] NET: Registered protocol family 16
[ 0.060003] node 0 link 0: io port [6000, ffff]
[ 0.060003] TOM: 0000000040000000 aka 1024M
[ 0.060003] node 0 link 0: mmio [a0000, bffff]
[ 0.060003] node 0 link 0: mmio [40000000, fe02ffff]
[ 0.060003] node 0 link 0: mmio [e0000000, e05fffff]
[ 0.060003] bus: [00, 05] on node 0 link 0
[ 0.060003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.060003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.060003] bus: 00 index 2 [mem 0x40000000-0xfcffffffff]
[ 0.060003] ACPI: bus type pci registered
[ 0.060003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.060003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.060003] PCI: Using MMCONFIG for extended config space
[ 0.060003] PCI: Using configuration type 1 for base access
[ 0.060003] bio: create slab <bio-0> at 0
[ 0.060003] ACPI: EC: Look up EC in DSDT
[ 0.061996] ACPI: Interpreter enabled
[ 0.061999] ACPI: (supports S0 S3 S4 S5)
[ 0.062015] ACPI: Using IOAPIC for interrupt routing
[ 0.066930] ACPI: No dock devices found.
[ 0.066932] HEST: Table not found.
[ 0.066936] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.067392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.068311] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.068315] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.068318] pci_root PNP0A08:00: host bridge window [io 0x6000-0xffff] (ignored)
[ 0.068320] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.068323] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.068327] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfe02ffff] (ignored)
[ 0.068330] pci_root PNP0A08:00: host bridge window [mem 0xfeb00000-0xfebfffff] (ignored)
[ 0.068344] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 0.068404] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[ 0.068425] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.068435] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 0.068443] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc1f]
[ 0.068455] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.068460] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.068471] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.068475] pci 0000:00:01.1: PME# disabled
[ 0.068489] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 0.068497] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.068519] pci 0000:00:02.0: supports D1 D2
[ 0.068522] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068525] pci 0000:00:02.0: PME# disabled
[ 0.068535] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 0.068544] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.068570] pci 0000:00:02.1: supports D1 D2
[ 0.068572] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068576] pci 0000:00:02.1: PME# disabled
[ 0.068591] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[ 0.068599] pci 0000:00:04.0: reg 10: [io 0xf000-0xf0ff]
[ 0.068604] pci 0000:00:04.0: reg 14: [io 0xec00-0xecff]
[ 0.068609] pci 0000:00:04.0: reg 18: [mem 0xfe02d000-0xfe02dfff]
[ 0.068627] pci 0000:00:04.0: supports D1 D2
[ 0.068637] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[ 0.068653] pci 0000:00:06.0: reg 20: [io 0xe000-0xe00f]
[ 0.068675] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[ 0.068682] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
[ 0.068687] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.068692] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
[ 0.068696] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.068701] pci 0000:00:07.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.068706] pci 0000:00:07.0: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.068724] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[ 0.068731] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
[ 0.068736] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
[ 0.068741] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
[ 0.068746] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
[ 0.068751] pci 0000:00:08.0: reg 20: [io 0xb800-0xb80f]
[ 0.068756] pci 0000:00:08.0: reg 24: [mem 0xfe02a000-0xfe02afff]
[ 0.068772] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 0.068790] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[ 0.068797] pci 0000:00:0a.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 0.068802] pci 0000:00:0a.0: reg 14: [io 0xb400-0xb407]
[ 0.068822] pci 0000:00:0a.0: supports D1 D2
[ 0.068825] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068828] pci 0000:00:0a.0: PME# disabled
[ 0.068840] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[ 0.068862] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068865] pci 0000:00:0b.0: PME# disabled
[ 0.068878] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[ 0.068900] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068903] pci 0000:00:0c.0: PME# disabled
[ 0.068916] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[ 0.068937] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068940] pci 0000:00:0d.0: PME# disabled
[ 0.068952] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 0.068973] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068975] pci 0000:00:0e.0: PME# disabled
[ 0.068993] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.069010] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.069025] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.069040] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.069057] PCI: peer root bus 00 res updated from pci conf
[ 0.069089] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.069092] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.069095] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.069099] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.069102] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.069106] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.069109] pci 0000:00:09.0: bridge window [mem 0x40000000-0xfcffffffff] (subtractive decode)
[ 0.069129] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.069133] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.069136] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.069140] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.069159] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.069163] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.069166] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.069170] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.069189] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.069193] pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff]
[ 0.069196] pci 0000:00:0d.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.069200] pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.069226] pci 0000:05:00.0: [1002:5b63] type 0 class 0x000300
[ 0.069235] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.069242] pci 0000:05:00.0: reg 14: [io 0x6c00-0x6cff]
[ 0.069249] pci 0000:05:00.0: reg 18: [mem 0xfd7f0000-0xfd7fffff]
[ 0.069268] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.069282] pci 0000:05:00.0: supports D1 D2
[ 0.069298] pci 0000:05:00.1: [1002:5b73] type 0 class 0x000380
[ 0.069307] pci 0000:05:00.1: reg 10: [mem 0xfd7e0000-0xfd7effff]
[ 0.069344] pci 0000:05:00.1: supports D1 D2
[ 0.069355] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.069363] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.069367] pci 0000:00:0e.0: bridge window [io 0x6000-0x6fff]
[ 0.069370] pci 0000:00:0e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.069374] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.069383] pci_bus 0000:00: on NUMA node 0
[ 0.069386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.069507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.069676] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.069678] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.097057] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097098] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097139] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.097180] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097219] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097260] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.097304] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097345] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.097385] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.097426] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.097466] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.097509] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.097549] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097595] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.097644] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.097692] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.097747] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.097799] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.097850] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.097901] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.097928] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.097984] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.098042] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.098099] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.098156] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.098212] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 0.098269] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.098326] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.098382] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.098444] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.098505] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.098566] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.098667] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.098670] vgaarb: loaded
[ 0.098708] PCI: Using ACPI for IRQ routing
[ 0.098712] PCI: pci_cache_line_size set to 64 bytes
[ 0.098758] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.098762] reserve RAM buffer: 000000003fee0000 - 000000003fffffff
[ 0.099947] pnp: PnP ACPI init
[ 0.099963] ACPI: bus type pnp registered
[ 0.100463] pnp 00:00: [bus 00-05]
[ 0.100467] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.100469] pnp 00:00: [io 0x0000-0x03af window]
[ 0.100471] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.100474] pnp 00:00: [io 0x6000-0xffff window]
[ 0.100476] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.100479] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.100482] pnp 00:00: [mem 0x40000000-0xfe02ffff window]
[ 0.100484] pnp 00:00: [mem 0x00000000 window]
[ 0.100486] pnp 00:00: [mem 0xfeb00000-0xfebfffff window]
[ 0.100551] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.100591] pnp 00:01: [io 0x1000-0x107f]
[ 0.100593] pnp 00:01: [io 0x1080-0x10ff]
[ 0.100595] pnp 00:01: [io 0x1400-0x147f]
[ 0.100598] pnp 00:01: [io 0x1480-0x14ff]
[ 0.100600] pnp 00:01: [io 0x1800-0x187f]
[ 0.100602] pnp 00:01: [io 0x1880-0x18ff]
[ 0.100605] pnp 00:01: [mem 0xa0000000-0x9fffffff disabled]
[ 0.100656] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.100659] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.100662] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.100665] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.100668] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.100671] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.100674] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.101092] pnp 00:02: [io 0x0010-0x001f]
[ 0.101095] pnp 00:02: [io 0x0022-0x003f]
[ 0.101097] pnp 00:02: [io 0x0044-0x005f]
[ 0.101099] pnp 00:02: [io 0x0062-0x0063]
[ 0.101101] pnp 00:02: [io 0x0065-0x006f]
[ 0.101103] pnp 00:02: [io 0x0074-0x007f]
[ 0.101106] pnp 00:02: [io 0x0091-0x0093]
[ 0.101108] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.101110] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.101112] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.101114] pnp 00:02: [io 0x0800-0x087f]
[ 0.101117] pnp 00:02: [io 0x0290-0x030f]
[ 0.101119] pnp 00:02: [io 0x0290-0x0297]
[ 0.101176] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.101179] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.101182] system 00:02: [io 0x0290-0x030f] has been reserved
[ 0.101185] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.101188] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.101199] pnp 00:03: [dma 4]
[ 0.101201] pnp 00:03: [io 0x0000-0x000f]
[ 0.101203] pnp 00:03: [io 0x0080-0x0090]
[ 0.101205] pnp 00:03: [io 0x0094-0x009f]
[ 0.101208] pnp 00:03: [io 0x00c0-0x00df]
[ 0.101238] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.101248] pnp 00:04: [io 0x0070-0x0073]
[ 0.101263] pnp 00:04: [irq 8]
[ 0.101296] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.101304] pnp 00:05: [io 0x0061]
[ 0.101335] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.101343] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.101349] pnp 00:06: [irq 13]
[ 0.101381] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.101511] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.101513] pnp 00:07: [io 0x03f7]
[ 0.101519] pnp 00:07: [irq 6]
[ 0.101521] pnp 00:07: [dma 2]
[ 0.101566] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.101739] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.101745] pnp 00:08: [irq 4]
[ 0.101808] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.102248] pnp 00:09: [io 0x0378-0x037f]
[ 0.102251] pnp 00:09: [io 0x0778-0x077b]
[ 0.102256] pnp 00:09: [irq 7]
[ 0.102258] pnp 00:09: [dma 3]
[ 0.102321] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.102352] pnp 00:0a: [io 0x0060]
[ 0.102354] pnp 00:0a: [io 0x0064]
[ 0.102359] pnp 00:0a: [irq 1]
[ 0.102394] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.102421] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.102469] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.102473] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.102578] pnp 00:0c: [mem 0x000d1800-0x000d3fff]
[ 0.102581] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.102583] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.102586] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.102588] pnp 00:0c: [mem 0x3fee0000-0x3fefffff]
[ 0.102591] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.102593] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.102595] pnp 00:0c: [mem 0x00100000-0x3fedffff]
[ 0.102598] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.102600] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.102602] pnp 00:0c: [mem 0xfefff000-0xfeffffff]
[ 0.102605] pnp 00:0c: [mem 0xfff80000-0xfff80fff]
[ 0.102607] pnp 00:0c: [mem 0xfff90000-0xfffbffff]
[ 0.102609] pnp 00:0c: [mem 0xfffed000-0xfffeffff]
[ 0.102671] system 00:0c: [mem 0x000d1800-0x000d3fff] has been reserved
[ 0.102675] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.102678] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.102681] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.102684] system 00:0c: [mem 0x3fee0000-0x3fefffff] could not be reserved
[ 0.102688] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.102691] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.102694] system 00:0c: [mem 0x00100000-0x3fedffff] could not be reserved
[ 0.102697] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.102700] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.102704] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.102707] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.102710] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.102713] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.102717] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.102725] pnp: PnP ACPI: found 13 devices
[ 0.102727] ACPI: ACPI bus type pnp unregistered
[ 0.102730] PnPBIOS: Disabled by ACPI PNP
[ 0.138818] Switching to clocksource acpi_pm
[ 0.138852] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.138855] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.138859] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.138862] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.138867] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.138870] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.138873] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.138877] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.138881] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.138884] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.138888] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.138891] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.138895] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.138898] pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff]
[ 0.138902] pci 0000:00:0d.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.138905] pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.138913] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd700000-0xfd71ffff pref]
[ 0.138917] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.138919] pci 0000:00:0e.0: bridge window [io 0x6000-0x6fff]
[ 0.138923] pci 0000:00:0e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.138927] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.138935] pci 0000:00:09.0: setting latency timer to 64
[ 0.138940] pci 0000:00:0b.0: setting latency timer to 64
[ 0.138944] pci 0000:00:0c.0: setting latency timer to 64
[ 0.138949] pci 0000:00:0d.0: setting latency timer to 64
[ 0.138953] pci 0000:00:0e.0: setting latency timer to 64
[ 0.138957] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.138960] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.138963] pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
[ 0.138966] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.138969] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.138972] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[ 0.138975] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.138977] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.138980] pci_bus 0000:01: resource 6 [mem 0x40000000-0xfcffffffff]
[ 0.138983] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.138986] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.138989] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.138992] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.138995] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.138998] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.139001] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.139004] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.139007] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.139010] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.139013] pci_bus 0000:05: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.139016] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.139059] NET: Registered protocol family 2
[ 0.139140] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.139432] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.139432] Switched to NOHz mode on CPU #0
[ 0.139432] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.139432] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.139432] TCP reno registered
[ 0.139432] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.139432] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.139432] NET: Registered protocol family 1
[ 0.156079] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156085] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.156092] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156097] pci 0000:00:0b.0: Linking AER extended capability
[ 0.156132] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156137] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.156145] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156148] pci 0000:00:0c.0: Linking AER extended capability
[ 0.156186] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156192] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.156199] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156202] pci 0000:00:0d.0: Linking AER extended capability
[ 0.156243] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156249] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.156256] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.156259] pci 0000:00:0e.0: Linking AER extended capability
[ 0.156269] pci 0000:05:00.0: Boot video device
[ 0.156273] PCI: CLS 32 bytes, default 64
[ 0.156321] Unpacking initramfs...
[ 0.416105] Freeing initrd memory: 9044k freed
[ 0.420824] audit: initializing netlink socket (disabled)
[ 0.420836] type=2000 audit(1310466159.420:1): initialized
[ 0.438975] highmem bounce pool size: 64 pages
[ 0.438980] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.439222] VFS: Disk quotas dquot_6.5.2
[ 0.439295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.439392] msgmni has been set to 1750
[ 0.439538] alg: No test for stdrng (krng)
[ 0.439562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.439566] io scheduler noop registered
[ 0.439568] io scheduler deadline registered
[ 0.439581] io scheduler cfq registered (default)
[ 0.439651] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.439671] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.439707] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.439722] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.439754] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.439768] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.439800] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.439813] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.439954] ERST: Table is not found!
[ 0.439964] isapnp: Scanning for PnP cards...
[ 0.792468] isapnp: No Plug & Play device found
[ 0.792525] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.812797] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.833286] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.833482] Linux agpgart interface v0.103
[ 0.833734] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.833736] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.834520] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.834602] mousedev: PS/2 mouse device common for all mice
[ 0.834650] rtc_cmos 00:04: RTC can wake from S4
[ 0.834737] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.834759] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.834770] cpuidle: using governor ladder
[ 0.834772] cpuidle: using governor menu
[ 0.835000] TCP cubic registered
[ 0.835040] NET: Registered protocol family 10
[ 0.835651] Mobile IPv6
[ 0.835653] NET: Registered protocol family 17
[ 0.835658] Registering the dns_resolver key type
[ 0.835681] Using IPI No-Shortcut mode
[ 0.835752] PM: Hibernation image not present or could not be loaded.
[ 0.835760] registered taskstats version 1
[ 0.836040] rtc_cmos 00:04: setting system clock to 2011-07-12 10:22:40 UTC (1310466160)
[ 0.836065] Initializing network drop monitor service
[ 0.836158] Freeing unused kernel memory: 440k freed
[ 0.836404] Write protecting the kernel text: 2788k
[ 0.836426] Write protecting the kernel read-only data: 1032k
[ 0.836428] NX-protecting the kernel data: 3356k
[ 0.848931] udevd[43]: starting version 171
[ 0.854891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.965128] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.965288] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.965299] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.965304] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.973531] Floppy drive(s): fd0 is 1.44M
[ 0.995531] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.995534] ACPI: Thermal Zone [THRM] (43 C)
[ 1.013894] ACPI: Fan [FAN] (on)
[ 1.017638] FDC 0 is a post-1991 82077
[ 1.090795] usbcore: registered new interface driver usbfs
[ 1.090918] usbcore: registered new interface driver hub
[ 1.090956] usbcore: registered new device driver usb
[ 1.094267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.094918] SCSI subsystem initialized
[ 1.133718] libata version 3.00 loaded.
[ 1.488677] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:ec:35:bd:60
[ 1.488682] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.489036] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 1.489047] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 1.489063] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.489066] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.489101] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.489122] ehci_hcd 0000:00:02.1: debug port 1
[ 1.489127] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[ 1.489144] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 1.500019] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.500040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.500043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.500045] usb usb1: Product: EHCI Host Controller
[ 1.500048] usb usb1: Manufacturer: Linux 2.6.39-2-686-pae ehci_hcd
[ 1.500050] usb usb1: SerialNumber: 0000:00:02.1
[ 1.500157] hub 1-0:1.0: USB hub found
[ 1.500161] hub 1-0:1.0: 10 ports detected
[ 1.500324] pata_amd 0000:00:06.0: version 0.4.1
[ 1.500367] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.502093] scsi0 : pata_amd
[ 1.502724] scsi1 : pata_amd
[ 1.503165] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 1.503168] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 1.503301] sata_nv 0000:00:07.0: version 3.5
[ 1.503436] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.503447] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 1.503495] sata_nv 0000:00:07.0: setting latency timer to 64
[ 1.505273] scsi2 : sata_nv
[ 1.505508] scsi3 : sata_nv
[ 1.505624] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 21
[ 1.505627] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 21
[ 1.505786] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.505797] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 1.505843] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.506163] scsi4 : sata_nv
[ 1.506268] scsi5 : sata_nv
[ 1.506362] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 20
[ 1.506365] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 20
[ 1.597550] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.597700] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 1.597706] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 1.597723] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.597726] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.597741] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.597769] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 1.654023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.654026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.654029] usb usb2: Product: OHCI Host Controller
[ 1.654031] usb usb2: Manufacturer: Linux 2.6.39-2-686-pae ohci_hcd
[ 1.654033] usb usb2: SerialNumber: 0000:00:02.0
[ 1.654203] hub 2-0:1.0: USB hub found
[ 1.654209] hub 2-0:1.0: 10 ports detected
[ 1.718522] ata1.00: ATA-7: ST3320620A, 3.AAC, max UDMA/100
[ 1.718525] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.718533] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[ 1.785146] ata1.00: configured for UDMA/100
[ 1.785256] scsi 0:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
[ 1.816022] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.816036] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.948284] ata2.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
[ 1.948291] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13)
[ 1.964217] ata2.00: configured for UDMA/33
[ 1.965572] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
[ 2.276019] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.588019] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.609908] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.609948] sd 0:0:0:0: [sda] Write Protect is off
[ 2.609952] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.609969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.610466] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.610470] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.610727] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.668312] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 2.668823] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.677463] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.678542] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.335860] speakup: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.340942] input: Speakup as /devices/virtual/input/input1
[ 3.341266] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 3.341287] speakup 3.1.6: initialized
[ 3.341289] synth name on entry is: soft
[ 3.341385] speakup_soft: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.342562] synth probe
[ 3.342820] initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26)
[ 3.350622] PM: Starting manual resume from disk
[ 3.350627] PM: Hibernation image partition 8:7 present
[ 3.350629] PM: Looking for hibernation image.
[ 3.364320] PM: Image not found (code -22)
[ 3.364322] PM: Hibernation image not present or could not be loaded.
[ 3.381100] EXT3-fs (sda1): recovery required on readonly filesystem
[ 3.381104] EXT3-fs (sda1): write access will be enabled during recovery
[ 3.381290] EXT3-fs: barriers not enabled
[ 3.392622] kjournald starting. Commit interval 5 seconds
[ 3.392633] EXT3-fs (sda1): recovery complete
[ 3.392761] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.432767] udevd[281]: starting version 171
[ 4.875377] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 4.875419] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 4.880479] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.894786] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.894792] ACPI: Power Button [PWRB]
[ 4.895263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.895267] ACPI: Power Button [PWRF]
[ 4.928290] ACPI: acpi_idle registered with cpuidle
[ 5.021093] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.021144] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.303999] [drm] Initialized drm 1.1.0 20060810
[ 5.420361] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 5.420368] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 5.420392] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 5.524212] [drm] radeon defaulting to kernel modesetting.
[ 5.524215] [drm] radeon kernel modesetting enabled.
[ 5.524363] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 5.524375] radeon 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 5.524380] radeon 0000:05:00.0: setting latency timer to 64
[ 5.524588] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63).
[ 5.524609] [drm] register mmio base: 0xFD7F0000
[ 5.524611] [drm] register mmio size: 65536
[ 5.525867] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.525872] radeon 0000:05:00.0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (256M used)
[ 5.525875] radeon 0000:05:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[ 5.525883] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.525885] [drm] Driver supports precise vblank timestamp query.
[ 5.525908] radeon 0000:05:00.0: irq 44 for MSI/MSI-X
[ 5.525913] radeon 0000:05:00.0: radeon: using MSI.
[ 5.525931] [drm] radeon: irq initialized.
[ 5.526015] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.526019] [drm] RAM width 128bits DDR
[ 5.526078] [TTM] Zone kernel: Available graphics memory: 448454 kiB.
[ 5.526081] [TTM] Zone highmem: Available graphics memory: 516490 kiB.
[ 5.526083] [TTM] Initializing pool allocator.
[ 5.526110] [drm] radeon: 256M of VRAM memory ready
[ 5.526113] [drm] radeon: 512M of GTT memory ready.
[ 5.526129] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.527550] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 5.528879] [drm] PCIE GART of 512M enabled (table at 0xD0040000).
[ 5.528903] radeon 0000:05:00.0: WB enabled
[ 5.530541] [drm] Loading R300 Microcode
[ 5.616522] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 5.616563] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 5.616597] radeon 0000:05:00.0: failed initializing CP (-2).
[ 5.616629] radeon 0000:05:00.0: Disabling GPU acceleration
[ 5.616664] [drm] radeon: cp finalized
[ 5.617184] radeon 0000:05:00.0: f7176800 unpin not necessary
[ 5.617394] [drm] Radeon Display Connectors
[ 5.617396] [drm] Connector 0:
[ 5.617398] [drm] VGA
[ 5.617400] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 5.617402] [drm] Encoders:
[ 5.617404] [drm] CRT1: INTERNAL_DAC1
[ 5.617406] [drm] Connector 1:
[ 5.617407] [drm] DVI-I
[ 5.617409] [drm] HPD1
[ 5.617411] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 5.617413] [drm] Encoders:
[ 5.617415] [drm] CRT2: INTERNAL_DAC2
[ 5.617416] [drm] DFP1: INTERNAL_TMDS1
[ 5.617418] [drm] Connector 2:
[ 5.617419] [drm] S-video
[ 5.617421] [drm] Encoders:
[ 5.617422] [drm] TV1: INTERNAL_DAC2
[ 5.669619] No connectors reported connected with modes
[ 5.669623] [drm] Cannot find any crtc or sizes - going 1024x768
[ 5.672225] [drm] fb mappable at 0xD0040000
[ 5.672227] [drm] vram apper at 0xD0000000
[ 5.672228] [drm] size 3145728
[ 5.672230] [drm] fb depth is 24
[ 5.672232] [drm] pitch is 4096
[ 5.672362] fbcon: radeondrmfb (fb0) is primary device
[ 5.678567] Console: switching to colour frame buffer device 128x48
[ 5.682370] fb0: radeondrmfb frame buffer device
[ 5.682372] drm: registered panic notifier
[ 5.688055] [drm] Initialized radeon 2.9.0 20080528 for 0000:05:00.0 on minor 0
[ 5.748023] intel8x0_measure_ac97_clock: measured 52040 usecs (2560 samples)
[ 5.748026] intel8x0: clocking to 46836
[ 6.423407] Adding 2016252k swap on /dev/sda7. Priority:-1 extents:1 across:2016252k
[ 6.785618] EXT3-fs (sda1): using internal journal
[ 6.887365] loop: module loaded
[ 131.241825] EXT3-fs: barriers not enabled
[ 131.257486] kjournald starting. Commit interval 5 seconds
[ 131.257755] EXT3-fs (sda9): using internal journal
[ 131.257759] EXT3-fs (sda9): mounted filesystem with ordered data mode
[ 131.315358] EXT3-fs: barriers not enabled
[ 131.315496] kjournald starting. Commit interval 5 seconds
[ 131.315614] EXT3-fs (sda8): using internal journal
[ 131.315618] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 131.370964] EXT3-fs: barriers not enabled
[ 131.371116] kjournald starting. Commit interval 5 seconds
[ 131.371264] EXT3-fs (sda5): using internal journal
[ 131.371268] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 131.425190] EXT3-fs: barriers not enabled
[ 131.425358] kjournald starting. Commit interval 5 seconds
[ 131.425485] EXT3-fs (sda6): using internal journal
[ 131.425489] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 132.050048] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 132.050115] ata1.00: BMDMA stat 0x64
[ 132.050150] ata1.00: failed command: READ DMA
[ 132.050196] ata1.00: cmd c8/00:00:e8:c0:0f/00:00:00:00:00/e1 tag 0 dma 131072 in
[ 132.050197] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 132.050335] ata1.00: status: { DRDY ERR }
[ 132.050373] ata1.00: error: { ICRC ABRT }
[ 132.050426] ata1: soft resetting link
[ 132.259192] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[ 132.325826] ata1.00: configured for UDMA/100
[ 132.325834] ata1: EH complete
[ 137.134298] lp0: using parport0 (interrupt-driven).
[ 137.179419] ppdev: user-space parallel port driver
[ 143.603981] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 143.605470] ata1.00: BMDMA stat 0x64
[ 143.607028] ata1.00: failed command: READ DMA
[ 143.608597] ata1.00: cmd c8/00:a0:c0:35:3c/00:00:00:00:00/e1 tag 0 dma 81920 in
[ 143.608598] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 143.611630] ata1.00: status: { DRDY ERR }
[ 143.613125] ata1.00: error: { ICRC ABRT }
[ 143.614608] ata1: soft resetting link
[ 143.813105] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[ 143.879734] ata1.00: configured for UDMA/100
[ 143.879745] ata1: EH complete
[ 144.345348] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 144.346890] ata1.00: BMDMA stat 0x64
[ 144.348470] ata1.00: failed command: READ DMA
[ 144.350030] ata1.00: cmd c8/00:a0:c0:35:3c/00:00:00:00:00/e1 tag 0 dma 81920 in
[ 144.350032] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 144.353059] ata1.00: status: { DRDY ERR }
[ 144.354554] ata1.00: error: { ICRC ABRT }
[ 144.356069] ata1: soft resetting link
[ 144.562838] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[ 144.629463] ata1.00: configured for UDMA/100
[ 144.629473] ata1: EH complete
[ 144.760020] eth0: no IPv6 routers present
[ 145.195015] ata1.00: limiting speed to UDMA/66:PIO4
[ 145.195020] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 145.196578] ata1.00: BMDMA stat 0x64
[ 145.198182] ata1.00: failed command: READ DMA
[ 145.199798] ata1.00: cmd c8/00:00:78:e2:3a/00:00:00:00:00/e1 tag 0 dma 131072 in
[ 145.199800] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 145.202937] ata1.00: status: { DRDY ERR }
[ 145.204482] ata1.00: error: { ICRC ABRT }
[ 145.206011] ata1: soft resetting link
[ 145.412484] ata1: nv_mode_filter: 0x1f39f&0x3f39f->0x1f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[ 145.479112] ata1.00: configured for UDMA/66
[ 145.479122] ata1: EH complete
Reply to: