Package: installation-reports Severity: wishlist the /usr partition was small, df -h displays /dev/hda5 3.4G 3.3G 0 100% /usr I could not install some livetex or latex packages. -- Package-specific info: Boot method: CD Image version: debian-504-i386-netinst.iso Date: Thu Feb 25 11:14:59 CET 2010 Machine: fujitsu siemens Pentium III 667 MHz 256MB RAM Partitions: <df -Tl will do; the raw partition table is preferred> df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda1 ext3 334460 102608 214584 33% / tmpfs tmpfs 127684 0 127684 0% /lib/init/rw udev tmpfs 10240 660 9580 7% /dev tmpfs tmpfs 127684 0 127684 0% /dev/shm /dev/hda9 ext3 3462956 905264 2381784 28% /home /dev/hda8 ext3 303344 10321 277362 4% /tmp /dev/hda5 ext3 3462956 3449736 0 100% /usr /dev/hda6 ext3 1699804 1086812 526648 68% /var Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [E] Install boot loader: [O] Overall install: [O] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> The install was very smooth, this machine has USB, but this USB does not support boot from USB, Hence I decided to connect an IDE CDROM DVD Reader to the IDE channel, which worked on the fly. It is a machine with no bootable USB and only a floppy drive, no CDROM connected, I opened the machine and connected a CDROM. The automatic allocations of the partition sizes provides too little space for the /usr partition. I did also try the gmp package, but on first attempt it did not work. The real problem is still on my iMac G3 (slot loading) no X, only console, which is on my side under investigation. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub [8086:7124] (rev 03) 00:01.0 VGA compatible controller [0300]: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller [8086:7125] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller [8086:2411] (rev 02) 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB Controller [8086:2412] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413] (rev 02) 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 02) 01:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 09) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Feb 10 08:59:21 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5800 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) [ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 254MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 65264) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 65264 [ 0.000000] HighMem 65264 -> 65264 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 65264 [ 0.000000] On node 0 totalpages: 65264 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 478 pages used for memmap [ 0.000000] Normal zone: 60690 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F6E80, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 0FEFD671, 002C (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 0FEFD69D, 0074 (r1 FSC D1170/71 6040000 F4240) [ 0.000000] ACPI: DSDT 0FEFD711, 24C8 (r1 FSC D1170/71 6040000 MSFT 100000C) [ 0.000000] ACPI: FACS 0FEFFFC0, 0040 [ 0.000000] ACPI: BOOT 0FEFFBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Fujitsu Siemens [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64754 [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0120c000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 664.564 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.004000] Memory: 248900k/261056k available (1771k kernel code, 11628k reserved, 750k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 0.004000] lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02bacb5 - 0xc0376620 ( 750 kB) [ 0.004000] .text : 0xc0100000 - 0xc02bacb5 (1771 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084397] Calibrating delay using timer specific routine.. 1330.91 BogoMIPS (lpj=2661827) [ 0.084516] Security Framework initialized [ 0.084536] SELinux: Disabled at boot. [ 0.084550] Capability LSM initialized [ 0.084602] Mount-cache hash table entries: 512 [ 0.085026] Initializing cgroup subsys ns [ 0.085039] Initializing cgroup subsys cpuacct [ 0.085047] Initializing cgroup subsys devices [ 0.085106] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.085117] CPU: L2 cache: 256K [ 0.085131] Intel machine check architecture supported. [ 0.085143] Intel machine check reporting enabled on CPU#0. [ 0.085183] Checking 'hlt' instruction... OK. [ 0.100924] SMP alternatives: switching to UP code [ 0.114197] Freeing SMP alternatives: 16k freed [ 0.114210] ACPI: Core revision 20080321 [ 0.121550] ACPI: setting ELCR to 0200 (from 0a20) [ 0.125624] weird, boot CPU (#0) not listedby the BIOS. [ 0.125635] SMP motherboard not detected. [ 0.125644] Local APIC not detected. Using dummy APIC emulation. [ 0.125651] SMP disabled [ 0.125847] Brought up 1 CPUs [ 0.125857] Total of 1 processors activated (1330.91 BogoMIPS). [ 0.125884] CPU0 attaching sched-domain: [ 0.125894] domain 0: span 0 [ 0.125901] groups: 0 [ 0.126666] net_namespace: 660 bytes [ 0.126696] Booting paravirtualized kernel on bare hardware [ 0.127585] NET: Registered protocol family 16 [ 0.128109] ACPI: bus type pci registered [ 0.128984] PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1 [ 0.128995] PCI: Using configuration type 1 for base access [ 0.129038] Setting up standard PCI resources [ 0.133077] ACPI: EC: Look up EC in DSDT [ 0.139751] ACPI: Interpreter enabled [ 0.139764] ACPI: (supports S0 S1 S3 S4 S5) [ 0.139817] ACPI: Using PIC for interrupt routing [ 0.147714] ACPI: Device [ECP] status [00000008]: functional but not present; setting present [ 0.149103] ACPI: Device [GAME] status [00000008]: functional but not present; setting present [ 0.149495] ACPI: Device [MIDI] status [00000008]: functional but not present; setting present [ 0.150124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.150538] pci 0000:00:1f.0: quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO [ 0.150551] pci 0000:00:1f.0: quirk: region f180-f1bf claimed by ICH4 GPIO [ 0.150929] PCI: Transparent bridge - 0000:00:1e.0 [ 0.150970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.151113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] [ 0.154758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.155061] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.155313] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.156150] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.156264] pnp: PnP ACPI init [ 0.156296] ACPI: bus type pnp registered [ 0.162980] pnp: PnP ACPI: found 16 devices [ 0.162992] ACPI: ACPI bus type pnp unregistered [ 0.163010] PnPBIOS: Disabled by ACPI PNP [ 0.163983] PCI: Using ACPI for IRQ routing [ 0.164721] ACPI: RTC can wake from S4 [ 0.164827] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.164839] system 00:02: ioport range 0xf000-0xf07f has been reserved [ 0.164850] system 00:02: ioport range 0xf100-0xf10f has been reserved [ 0.164859] system 00:02: ioport range 0xf180-0xf1bf has been reserved [ 0.164869] system 00:02: ioport range 0xf800-0xf81f has been reserved [ 0.164879] system 00:02: ioport range 0xf820-0xf82f has been reserved [ 0.164888] system 00:02: ioport range 0xfe00-0xfe00 has been reserved [ 0.196374] PCI: Bridge: 0000:00:1e.0 [ 0.196385] IO window: 3000-3fff [ 0.196398] MEM window: 0xf4100000-0xf41fffff [ 0.196408] PREFETCH window: 0x0000000020000000-0x00000000200fffff [ 0.196437] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.196526] NET: Registered protocol family 2 [ 0.196875] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.197605] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.197837] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.198056] TCP: Hash tables configured (established 8192 bind 8192) [ 0.198064] TCP reno registered [ 0.198384] NET: Registered protocol family 1 [ 0.198787] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 1.043547] it is [ 2.043043] Freeing initrd memory: 6071k freed [ 2.043634] Simple Boot Flag at 0x69 set to 0x1 [ 2.044985] audit: initializing netlink socket (disabled) [ 2.045037] type=2000 audit(1267086138.044:1): initialized [ 2.045430] Total HugeTLB memory allocated, 0 [ 2.045680] VFS: Disk quotas dquot_6.5.1 [ 2.045790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.045931] msgmni has been set to 498 [ 2.046387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.046400] io scheduler noop registered [ 2.046407] io scheduler anticipatory registered [ 2.046413] io scheduler deadline registered [ 2.046456] io scheduler cfq registered (default) [ 2.046502] pci 0000:00:01.0: Boot video device [ 2.046576] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 2.047691] isapnp: Scanning for PnP cards... [ 2.402062] isapnp: No Plug & Play device found [ 2.411901] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.412215] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.412453] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.413649] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.414036] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.419211] brd: module loaded [ 2.419579] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.422568] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.422590] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.423116] mice: PS/2 mouse device common for all mice [ 2.423545] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.423579] rtc0: alarms up to one month, y3k [ 2.423705] cpuidle: using governor ladder [ 2.423714] cpuidle: using governor menu [ 2.423729] No iBFT detected. [ 2.425408] TCP cubic registered [ 2.425420] NET: Registered protocol family 17 [ 2.425441] Using IPI No-Shortcut mode [ 2.425887] registered taskstats version 1 [ 2.426201] rtc_cmos 00:04: setting system clock to 2010-02-25 08:22:19 UTC (1267086139) [ 2.427019] Freeing unused kernel memory: 244k freed [ 2.450763] input: AT Translated Set 2 keyboard as /class/input/input0 [ 2.767639] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.248184] Uniform Multi-Platform E-IDE driver [ 4.248205] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 4.373755] ICH: IDE controller (0x8086:0x2411 rev 0x02) at PCI slot 0000:00:1f.1 [ 4.373798] ICH: not 100% native mode: will probe irqs later [ 4.373829] ide0: BM-DMA at 0x1c00-0x1c07 [ 4.373849] ide1: BM-DMA at 0x1c08-0x1c0f [ 4.373862] Probing IDE interface ide0... [ 4.383037] usbcore: registered new interface driver usbfs [ 4.383121] usbcore: registered new interface driver hub [ 4.383241] usbcore: registered new device driver usb [ 4.444677] USB Universal Host Controller Interface driver v3.0 [ 4.660263] hda: Maxtor 31024H2, ATA DISK drive [ 4.920659] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 4.920675] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.332255] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.332446] hda: UDMA/66 mode selected [ 5.332630] Probing IDE interface ide1... [ 5.476196] Floppy drive(s): fd0 is 1.44M [ 5.496358] FDC 0 is a National Semiconductor PC87306 [ 6.068203] hdc: TSSTcorpDVD-ROM SH-D162D, ATAPI CD/DVD-ROM drive [ 6.740185] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.740387] hdc: UDMA/33 mode selected [ 6.740795] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.742541] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.744552] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 6.744567] PCI: setting IRQ 9 as level-triggered [ 6.744575] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 6.744606] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 6.744616] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 6.744881] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 6.744928] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001400 [ 6.745235] usb usb1: configuration #1 chosen from 1 choice [ 6.745335] hub 1-0:1.0: USB hub found [ 6.745368] hub 1-0:1.0: 2 ports detected [ 6.848396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.848411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.848420] usb usb1: Product: UHCI Host Controller [ 6.848427] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 6.848435] usb usb1: SerialNumber: 0000:00:1f.2 [ 6.848667] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 6.937448] e100: eth0: e100_probe: addr 0xf4120000, irq 9, MAC addr 00:30:05:05:5e:c0 [ 6.946024] No dock devices found. [ 6.986850] SCSI subsystem initialized [ 7.068652] libata version 3.00 loaded. [ 7.276334] hda: max request size: 128KiB [ 7.281744] hda: 20010816 sectors (10245 MB) w/512KiB Cache, CHS=19852/16/63 [ 7.281763] hda: cache flushes not supported [ 7.281903] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > [ 7.365642] hdc: ATAPI 32X DVD-ROM drive, 198kB Cache [ 7.365662] Uniform CD-ROM driver Revision: 3.20 [ 8.381023] PM: Starting manual resume from disk [ 8.512242] kjournald starting. Commit interval 5 seconds [ 8.512280] EXT3-fs: mounted filesystem with ordered data mode. [ 11.538090] udevd version 125 started [ 15.036484] input: PC Speaker as /class/input/input1 [ 15.726945] Linux agpgart interface v0.103 [ 15.824154] agpgart: Detected an Intel i810 Chipset. [ 15.835989] agpgart: AGP aperture is 64M @ 0xf8000000 [ 15.859185] Intel 82802 RNG detected [ 16.094257] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.101767] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.123983] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 16.123997] PCI: setting IRQ 5 as level-triggered [ 16.124089] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 17.493641] input: PS/2 Logitech Mouse as /class/input/input2 [ 17.743470] input: Power Button (FF) as /class/input/input3 [ 17.766211] ACPI: Power Button (FF) [PWRF] [ 17.766443] input: Power Button (CM) as /class/input/input4 [ 17.793875] ACPI: Power Button (CM) [PWRB] [ 18.970504] parport_pc 00:0a: reported by Plug and Play ACPI [ 18.970577] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.066737] parport_pc 00:0b: unable to assign resources [ 19.066813] parport_pc: probe of 00:0b failed with error -16 [ 19.243477] ns558 00:0e: activated [ 19.263539] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 890kHz [ 19.411206] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 19.411260] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 20.080102] intel8x0_measure_ac97_clock: measured 54661 usecs [ 20.080117] intel8x0: clocking to 48000 [ 20.743840] mpu401 00:0f: activated [ 23.588633] Adding 578300k swap on /dev/hda7. Priority:-1 extents:1 across:578300k [ 24.158655] EXT3 FS on hda1, internal journal [ 24.693148] loop: module loaded [ 26.360577] kjournald starting. Commit interval 5 seconds [ 26.364229] EXT3 FS on hda9, internal journal [ 26.364244] EXT3-fs: mounted filesystem with ordered data mode. [ 26.396021] kjournald starting. Commit interval 5 seconds [ 26.396021] EXT3 FS on hda8, internal journal [ 26.396021] EXT3-fs: mounted filesystem with ordered data mode. [ 26.448950] kjournald starting. Commit interval 5 seconds [ 26.452245] EXT3 FS on hda5, internal journal [ 26.452260] EXT3-fs: mounted filesystem with ordered data mode. [ 26.512977] kjournald starting. Commit interval 5 seconds [ 26.516248] EXT3 FS on hda6, internal journal [ 26.516262] EXT3-fs: mounted filesystem with ordered data mode. [ 29.604291] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 30.935442] NET: Registered protocol family 10 [ 30.937014] lo: Disabled Privacy Extensions [ 41.592030] eth0: no IPv6 routers present [ 60.240327] lp0: using parport0 (interrupt-driven). [ 60.299998] ppdev: user-space parallel port driver [ 63.251388] RPC: Registered udp transport module. [ 63.251401] RPC: Registered tcp transport module. [ 63.433465] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 63.574670] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 63.600016] NFSD: starting 90-second grace period [ 68.965893] Bluetooth: Core ver 2.11 [ 68.974354] NET: Registered protocol family 31 [ 68.974366] Bluetooth: HCI device and connection manager initialized [ 68.974377] Bluetooth: HCI socket layer initialized [ 69.137281] Bluetooth: L2CAP ver 2.9 [ 69.137292] Bluetooth: L2CAP socket layer initialized [ 69.399521] Bluetooth: RFCOMM socket layer initialized [ 69.399572] Bluetooth: RFCOMM TTY layer initialized [ 69.399580] Bluetooth: RFCOMM ver 1.8 [ 73.656654] NET: Registered protocol family 5 [ 76.326620] [drm] Initialized drm 1.1.0 20060810 [ 76.344889] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 76.344904] PCI: setting IRQ 11 as level-triggered [ 76.344913] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 76.344932] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 76.345012] mtrr: no more MTRRs available [ 76.345144] [drm] Initialized i810 1.4.0 20030605 on minor 0 [ 76.346185] mtrr: base(0xf8000000) is not aligned on a size(0x258000) boundary [ 77.072143] [drm] Using v1.4 init. [ 77.078121] mtrr: no more MTRRs available [ 80.240031] [drm:drm_release] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 80.240042] driver to use reclaim_buffers_idlelocked() instead. [ 80.240047] I will go on reclaiming the buffers anyway. === 00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Siemens Nixdorf AG Device 004a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> Kernel modules: i2c-i810 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: f4100000-f41fffff Prefetchable memory behind bridge: 20000000-200fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801AA IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 1c00 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801AA USB Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at 1400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02) Subsystem: Intel Corporation 82801AA SMBus Controller Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 1800 [size=16] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02) Subsystem: Siemens Nixdorf AG Device 0049 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 1000 [size=256] Region 1: I/O ports at 2000 [size=64] Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 01:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09) Subsystem: Siemens Nixdorf AG Device 004b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at f4120000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3400 [size=64] Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at 20000000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 Kernel modules: e100, eepro100 === X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux debian504scenic 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 Build Date: 08 June 2009 09:12:57AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 25 09:23:29 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) |-->Input Device "Configured Mouse" (==) |-->Input Device "Generic Keyboard" (==) The core pointer device wasn't specified explicitly in the layout. Using the first mouse device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81e38c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 110a,004a rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 110a,0049 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:08:0: chip 8086,1229 card 110a,004b rev 09 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0007 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x20000000 - 0x200fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/26, 0xf4000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [1] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [4] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [5] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [7] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [8] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [1] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [4] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [5] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [7] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [8] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [14] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [15] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) Matched intel from file name intel.ids in autoconfig (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.4.2, module version = 2.3.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00:01:0 (--) Assigning device section with no busID to primary device (--) Chipset i810e found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [14] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [15] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [14] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [16] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [17] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [18] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 2.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 16/16 (==) intel(0): Depth 16, (==) framebuffer bpp 16 (==) intel(0): RGB weight 565 (==) intel(0): Default visual is TrueColor (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (II) intel(0): initializing int10 (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 2.0 (II) intel(0): VESA VBE Total Mem: 1024 kB (II) intel(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 3.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: i810 Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) intel(0): VESA VBE DDC supported (II) intel(0): VESA VBE DDC Level 2 (II) intel(0): VESA VBE DDC transfer in appr. 1 sec. (II) intel(0): VESA VBE DDC read successfully (WW) EDID preferred timing clock 110.16MHz exceeds claimed max 110MHz, fixing (II) intel(0): Manufacturer: FUJ Model: 770 Serial#: 16843009 (II) intel(0): Year: 1999 Week: 38 (II) intel(0): EDID Version: 1.1 (II) intel(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) intel(0): Sync: Separate (II) intel(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23 (II) intel(0): Gamma: 1.35 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): redX: 0.609 redY: 0.342 greenX: 0.298 greenY: 0.588 (II) intel(0): blueX: 0.150 blueY: 0.063 whiteX: 0.280 whiteY: 0.311 (II) intel(0): Supported VESA Video Modes: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@70Hz (II) intel(0): 1024x768@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported Future Video Modes: (II) intel(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993 (II) intel(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 110.2 MHz Image Size: 306 x 230 mm (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1508 h_blank_end 1728 h_border: 0 (II) intel(0): v_active: 1024 v_sync: 1026 v_sync_end 1029 v_blanking: 1067 v_border: 0 (II) intel(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72 kHz, PixClock max 111 MHz (II) intel(0): Monitor name: FUJITSU 770 (II) intel(0): Serial No: C991430504 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff001aaa700701010101 (II) intel(0): 26090101281f1723e8269e9c574c9626 (II) intel(0): 10474fa10e00314a3159615981400101 (II) intel(0): 010101010101082b00c051002b4040a4 (II) intel(0): 230032e610000018000000fd0032781e (II) intel(0): 480b000a202020202020000000fc0046 (II) intel(0): 554a49545355203737302020000000ff (II) intel(0): 00433939313433303530340a20200036 (II) intel(0): EDID vendor "FUJ", prod id 1904 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 110.16 1280 1344 1508 1728 1024 1026 1029 1067 -hsync -vsync (63.8 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "640x480"x69.6 28.00 640 664 720 800 480 483 487 503 -hsync +vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (--) intel(0): Chipset: "i810e" (--) intel(0): Linear framebuffer at 0xF8000000 (--) intel(0): IO registers at addr 0xF4000000 (II) intel(0): Kernel reported 51712 total, 1 used (II) intel(0): I810CheckAvailableMemory: 206844k available (==) intel(0): Will alloc AGP framebuffer: 24576 kByte (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) intel(0): Configured Monitor: Using hsync range of 30.00-72.00 kHz (II) intel(0): Configured Monitor: Using vrefresh range of 50.00-120.00 Hz (II) intel(0): Configured Monitor: Using maximum pixel clock of 111.00 MHz (II) intel(0): Estimated virtual size for aspect ratio 1.3478 is 1280x960 (II) intel(0): Clock range: 9.50 to 163.00 MHz (II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (unknown reason) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (width too large for virtual size) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (width too large for virtual size) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (width too large for virtual size) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (width too large for virtual size) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1440x900" (width too large for virtual size) (II) intel(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1024" (width too large for virtual size) (II) intel(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (width too large for virtual size) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (width too large for virtual size) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (width too large for virtual size) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using driver mode "1280x1024" (height too large for virtual size) (--) intel(0): Virtual size is 1280x960 (pitch 1280) (**) intel(0): *Driver mode "1280x960": 101.2 MHz, 59.7 kHz, 59.9 Hz (II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (**) intel(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (**) intel(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz (II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz) (**) intel(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) intel(0): *Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz (II) intel(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz) (**) intel(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) intel(0): Modeline "1152x768"x54.8 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (44.2 kHz) (**) intel(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 84.9 Hz (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (**) intel(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (**) intel(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) intel(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) intel(0): *Driver mode "640x480": 35.0 MHz, 42.9 kHz, 84.6 Hz (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (**) intel(0): *Driver mode "640x480": 28.0 MHz, 35.0 kHz, 69.6 Hz (II) intel(0): Modeline "640x480"x69.6 28.00 640 664 720 800 480 483 487 503 -hsync +vsync (35.0 kHz) (**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) intel(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (**) intel(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (**) intel(0): Display dimensions: (310, 230) mm (**) intel(0): DPI set to (104, 106) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in (**) intel(0): page flipping disabled (II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B] [1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [7] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [16] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [17] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [18] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [19] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [20] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:01.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0 (II) [drm] loaded kernel module for "i810" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer handle = 0xf8000000 (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (II) intel(0): [drm] Registers = 0xf4000000 (II) intel(0): [agp] dcacheHandle : 0x0 (II) intel(0): [agp] GART: no dcache memory found (II) intel(0): [agp] Bound backbuffer memory (II) intel(0): [agp] Bound depthbuffer memory (II) intel(0): [agp] Bound System Texture Memory (II) intel(0): [agp] GART: Allocated 4K for mouse cursor image (II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image (II) intel(0): Adding 384 scanlines for pixmap caching (II) intel(0): Allocated Scratch Memory (II) intel(0): [dri] Buffer map : f7b000 (II) intel(0): [drm] added 256 4096 byte DMA buffers (II) intel(0): [drm] Init v1.4 interface. (II) intel(0): [drm] dma control initialized, using IRQ -22 (II) intel(0): [dri] visual configs initialized. (WW) intel(0): Failed to set up write-combining range (0xf8000000,0x4000000) (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) intel(0): Setting dot clock to 101.3 MHz [ 0x24 0x7 0x20 ] [ 38 9 2 ] (II) intel(0): chose watermark 0x22210000: (tab.freq 108.0) (II) intel(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Setting up tile and stipple cache: 30 128x128 slots (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): DPMS enabled (II) intel(0): [DRI] installation complete (II) intel(0): Direct rendering enabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:01.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (WW) Configured Mouse: No Device specified, looking for one... (II) Configured Mouse: Setting Device option to "/dev/input/mice" (--) Configured Mouse: Device: "/dev/input/mice" (==) Configured Mouse: Protocol: "Auto" (**) Option "CorePointer" (**) Configured Mouse: always reports core events (==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (**) Configured Mouse: Sensitivity: 1 (**) Option "CoreKeyboard" (**) Generic Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc104" (**) Generic Keyboard: XkbModel: "pc104" (**) Option "XkbLayout" "us" (**) Generic Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (II) evaluating device (Configured Mouse) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) evaluating device (Generic Keyboard) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2" (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) 3rd Button detected: disabling emulate3Button -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="5.0 (lenny) - installer build 20090123lenny6" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== umame -a: Linux debian504scenic 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub [8086:7124] (rev 03) lspci -knn: 00:01.0 VGA compatible controller [0300]: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller [8086:7125] (rev 03) lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02) lspci -knn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller [8086:2411] (rev 02) lspci -knn: Kernel driver in use: PIIX_IDE lspci -knn: Kernel modules: piix lspci -knn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB Controller [8086:2412] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413] (rev 02) lspci -knn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 02) lspci -knn: 01:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 09) lspci -knn: Kernel driver in use: e100 lspci -knn: Kernel modules: e100, eepro100 lsmod: Module Size Used by lsmod: ufs 63620 0 lsmod: qnx4 7684 0 lsmod: ntfs 180544 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187264 0 lsmod: jfs 148188 0 lsmod: ext3 103688 5 lsmod: jbd 35092 1 ext3 lsmod: vfat 8832 0 lsmod: fat 39964 1 vfat lsmod: ext2 52744 0 lsmod: mbcache 6656 2 ext3,ext2 lsmod: e100 29196 0 lsmod: mii 4864 1 e100 lsmod: nls_utf8 1664 2 lsmod: isofs 27684 0 lsmod: nls_base 6528 6 ntfs,jfs,vfat,fat,nls_utf8,isofs lsmod: zlib_inflate 13952 1 isofs lsmod: rsrc_nonstatic 9344 0 lsmod: pcmcia_core 31760 1 rsrc_nonstatic lsmod: ide_generic 2432 0 [permanent] lsmod: usb_storage 76352 0 lsmod: scsi_mod 129548 1 usb_storage lsmod: vga16fb 11276 2 lsmod: vgastate 7552 1 vga16fb lsmod: fan 4100 0 lsmod: ide_cd_mod 27524 0 lsmod: cdrom 30112 1 ide_cd_mod lsmod: ide_disk 10368 7 lsmod: parport_pc 22308 0 lsmod: parport 30152 1 parport_pc lsmod: floppy 47748 0 lsmod: uhci_hcd 18320 0 lsmod: piix 6404 0 [permanent] lsmod: thermal 15004 0 lsmod: processor 27824 1 thermal lsmod: thermal_sys 10656 3 fan,thermal,processor lsmod: usbcore 117104 3 usb_storage,uhci_hcd lsmod: ide_core 94760 4 ide_generic,ide_cd_mod,ide_disk,piix df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 127768 524 127244 0% /dev df: /dev/hda1 334460 101987 215205 32% /target df: /dev/hda9 3462956 71636 3215412 2% /target/home df: /dev/hda8 303344 10293 277390 4% /target/tmp df: /dev/hda5 3462956 2199840 1087208 67% /target/usr df: /dev/hda6 1699804 1089580 523880 68% /target/var df: /dev/hda1 334460 101987 215205 32% /dev/.static/dev df: tmpfs 127768 524 127244 0% /target/dev free: total used free shared buffers free: Mem: 255540 221016 34524 0 15276 free: Swap: 578300 3560 574740 free: Total: 833840 224576 609264 /proc/cmdline: vga=normal initrd=/install.386/initrd.gz -- quiet BOOT_IMAGE=/install.386/vmlinuz /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 8 /proc/cpuinfo: model name : Pentium III (Coppermine) /proc/cpuinfo: stepping : 3 /proc/cpuinfo: cpu MHz : 664.543 /proc/cpuinfo: cache size : 256 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 2 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse /proc/cpuinfo: bogomips : 1330.51 /proc/cpuinfo: clflush size : 32 /proc/cpuinfo: power management: /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:1f.1 /proc/ioports: 0170-0177 : ICH /proc/ioports: 01f0-01f7 : 0000:00:1f.1 /proc/ioports: 01f0-01f7 : ICH /proc/ioports: 02f8-02ff : serial /proc/ioports: 0376-0376 : 0000:00:1f.1 /proc/ioports: 0376-0376 : ICH /proc/ioports: 0378-037a : parport0 /proc/ioports: 03c0-03df : vga+ /proc/ioports: 03f2-03f2 : floppy /proc/ioports: 03f4-03f5 : floppy /proc/ioports: 03f6-03f6 : 0000:00:1f.1 /proc/ioports: 03f6-03f6 : ICH /proc/ioports: 03f7-03f7 : floppy /proc/ioports: 03f8-03ff : serial /proc/ioports: 04d0-04d1 : pnp 00:02 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 1000-10ff : 0000:00:1f.5 /proc/ioports: 1400-141f : 0000:00:1f.2 /proc/ioports: 1400-141f : uhci_hcd /proc/ioports: 1800-180f : 0000:00:1f.3 /proc/ioports: 1c00-1c0f : 0000:00:1f.1 /proc/ioports: 1c00-1c0f : ICH /proc/ioports: 2000-203f : 0000:00:1f.5 /proc/ioports: 3000-3fff : PCI Bus 0000:01 /proc/ioports: 3400-343f : 0000:01:08.0 /proc/ioports: 3400-343f : e100 /proc/ioports: f000-f07f : 0000:00:1f.0 /proc/ioports: f000-f07f : pnp 00:02 /proc/ioports: f000-f003 : ACPI PM1a_EVT_BLK /proc/ioports: f004-f005 : ACPI PM1a_CNT_BLK /proc/ioports: f008-f00b : ACPI PM_TMR /proc/ioports: f010-f015 : ACPI CPU throttle /proc/ioports: f028-f02b : ACPI GPE0_BLK /proc/ioports: f02c-f02f : ACPI GPE1_BLK /proc/ioports: f100-f10f : pnp 00:02 /proc/ioports: f180-f1bf : 0000:00:1f.0 /proc/ioports: f180-f1bf : pnp 00:02 /proc/ioports: f800-f81f : pnp 00:02 /proc/ioports: f820-f82f : pnp 00:02 /proc/ioports: fe00-fe00 : pnp 00:02 /proc/iomem: 00000000-0009f7ff : System RAM /proc/iomem: 0009f800-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-0feeffff : System RAM /proc/iomem: 00100000-002a8280 : Kernel code /proc/iomem: 002a8281-00362fff : Kernel data /proc/iomem: 003b6000-0040fbd7 : Kernel bss /proc/iomem: 0fef0000-0feffbff : ACPI Tables /proc/iomem: 0feffc00-0fefffff : ACPI Non-volatile Storage /proc/iomem: 0ff00000-0fffffff : reserved /proc/iomem: 20000000-200fffff : PCI Bus 0000:01 /proc/iomem: 20000000-200fffff : 0000:01:08.0 /proc/iomem: f4000000-f407ffff : 0000:00:01.0 /proc/iomem: f4100000-f41fffff : PCI Bus 0000:01 /proc/iomem: f4100000-f411ffff : 0000:01:08.0 /proc/iomem: f4100000-f411ffff : e100 /proc/iomem: f4120000-f4120fff : 0000:01:08.0 /proc/iomem: f4120000-f4120fff : e100 /proc/iomem: f8000000-fbffffff : 0000:00:01.0 /proc/iomem: fff00000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 1978841 XT-PIC-XT timer /proc/interrupts: 1: 518 XT-PIC-XT i8042 /proc/interrupts: 2: 0 XT-PIC-XT cascade /proc/interrupts: 3: 2 XT-PIC-XT /proc/interrupts: 4: 2 XT-PIC-XT /proc/interrupts: 6: 7 XT-PIC-XT floppy /proc/interrupts: 7: 0 XT-PIC-XT parport0 /proc/interrupts: 8: 0 XT-PIC-XT rtc0 /proc/interrupts: 9: 893443 XT-PIC-XT acpi, uhci_hcd:usb1, eth0 /proc/interrupts: 12: 3 XT-PIC-XT i8042 /proc/interrupts: 14: 243753 XT-PIC-XT ide0 /proc/interrupts: 15: 3475 XT-PIC-XT ide1 /proc/interrupts: NMI: 0 Non-maskable interrupts /proc/interrupts: LOC: 0 Local timer interrupts /proc/interrupts: TRM: 0 Thermal event interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 255540 kB /proc/meminfo: MemFree: 34548 kB /proc/meminfo: Buffers: 15276 kB /proc/meminfo: Cached: 176308 kB /proc/meminfo: SwapCached: 2876 kB /proc/meminfo: Active: 85556 kB /proc/meminfo: Inactive: 115760 kB /proc/meminfo: SwapTotal: 578300 kB /proc/meminfo: SwapFree: 574740 kB /proc/meminfo: Dirty: 684 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 7352 kB /proc/meminfo: Mapped: 1564 kB /proc/meminfo: Slab: 14444 kB /proc/meminfo: SReclaimable: 11060 kB /proc/meminfo: SUnreclaim: 3384 kB /proc/meminfo: PageTables: 292 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 706068 kB /proc/meminfo: Committed_AS: 14056 kB /proc/meminfo: VmallocTotal: 777924 kB /proc/meminfo: VmallocUsed: 4108 kB /proc/meminfo: VmallocChunk: 773328 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash From MAILER-DAEMON Thu Feb 25 12:31:55 2010 Return-path: <> Envelope-to: morten@debian504scenic.arcor.de Delivery-date: Thu, 25 Feb 2010 12:31:55 +0100 Received: from Debian-exim by debian504scenic.arcor.de with local (Exim 4.69) id 1Nkbwh-000172-7a for morten@debian504scenic.arcor.de; Thu, 25 Feb 2010 12:31:55 +0100 X-Failed-Recipients: submit@bugs.debian.org Auto-Submitted: auto-replied From: Mail Delivery System <Mailer-Daemon@debian504scenic.arcor.de> To: morten@debian504scenic.arcor.de Subject: Mail delivery failed: returning message to sender Message-Id: <E1Nkbwh-000172-7a@debian504scenic.arcor.de> Date: Thu, 25 Feb 2010 12:31:55 +0100 Status: O This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: submit@bugs.debian.org Mailing to remote domains not supported ------ This is a copy of the message, including all the headers. ------ Return-path: <morten@debian504scenic.arcor.de> Received: from morten by debian504scenic.arcor.de with local (Exim 4.69) (envelope-from <morten@debian504scenic.arcor.de>) id 1Nkbwg-00016z-07; Thu, 25 Feb 2010 12:31:54 +0100 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="UTF-8" From: Morten Gulbrandsen <morten@debian504scenic.arcor.de> To: Debian Bug Tracking System <submit@bugs.debian.org> Subject: installation-reports: install report 2.6.26-2-686 #1 SMP usr partition too small debian-504-i386-netinst.iso Message-ID: <20100225113153.3804.397.reportbug@debian504scenic.arcor.de> X-Mailer: reportbug 3.48 Date: Thu, 25 Feb 2010 12:31:53 +0100 Package: installation-reports Severity: wishlist the /usr partition was small, df -h displays /dev/hda5 3.4G 3.3G 0 100% /usr I could not install some livetex or latex packages. -- Package-specific info: Boot method: CD Image version: debian-504-i386-netinst.iso Date: Thu Feb 25 11:14:59 CET 2010 Machine: fujitsu siemens Pentium III 667 MHz 256MB RAM Partitions: <df -Tl will do; the raw partition table is preferred> df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda1 ext3 334460 102608 214584 33% / tmpfs tmpfs 127684 0 127684 0% /lib/init/rw udev tmpfs 10240 660 9580 7% /dev tmpfs tmpfs 127684 0 127684 0% /dev/shm /dev/hda9 ext3 3462956 905264 2381784 28% /home /dev/hda8 ext3 303344 10321 277362 4% /tmp /dev/hda5 ext3 3462956 3449736 0 100% /usr /dev/hda6 ext3 1699804 1086812 526648 68% /var Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [E] Install boot loader: [O] Overall install: [O] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> The install was very smooth, this machine has USB, but this USB does not support boot from USB, Hence I decided to connect an IDE CDROM DVD Reader to the IDE channel, which worked on the fly. It is a machine with no bootable USB and only a floppy drive, no CDROM connected, I opened the machine and connected a CDROM. The automatic allocations of the partition sizes provides too little space for the /usr partition. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub [8086:7124] (rev 03) 00:01.0 VGA compatible controller [0300]: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller [8086:7125] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller [8086:2411] (rev 02) 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB Controller [8086:2412] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413] (rev 02) 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 02) 01:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 09) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Feb 10 08:59:21 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5800 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) [ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 254MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 65264) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 65264 [ 0.000000] HighMem 65264 -> 65264 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 65264 [ 0.000000] On node 0 totalpages: 65264 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 478 pages used for memmap [ 0.000000] Normal zone: 60690 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F6E80, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 0FEFD671, 002C (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 0FEFD69D, 0074 (r1 FSC D1170/71 6040000 F4240) [ 0.000000] ACPI: DSDT 0FEFD711, 24C8 (r1 FSC D1170/71 6040000 MSFT 100000C) [ 0.000000] ACPI: FACS 0FEFFFC0, 0040 [ 0.000000] ACPI: BOOT 0FEFFBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Fujitsu Siemens [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64754 [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0120c000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 664.564 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.004000] Memory: 248900k/261056k available (1771k kernel code, 11628k reserved, 750k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 0.004000] lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02bacb5 - 0xc0376620 ( 750 kB) [ 0.004000] .text : 0xc0100000 - 0xc02bacb5 (1771 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084397] Calibrating delay using timer specific routine.. 1330.91 BogoMIPS (lpj=2661827) [ 0.084516] Security Framework initialized [ 0.084536] SELinux: Disabled at boot. [ 0.084550] Capability LSM initialized [ 0.084602] Mount-cache hash table entries: 512 [ 0.085026] Initializing cgroup subsys ns [ 0.085039] Initializing cgroup subsys cpuacct [ 0.085047] Initializing cgroup subsys devices [ 0.085106] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.085117] CPU: L2 cache: 256K [ 0.085131] Intel machine check architecture supported. [ 0.085143] Intel machine check reporting enabled on CPU#0. [ 0.085183] Checking 'hlt' instruction... OK. [ 0.100924] SMP alternatives: switching to UP code [ 0.114197] Freeing SMP alternatives: 16k freed [ 0.114210] ACPI: Core revision 20080321 [ 0.121550] ACPI: setting ELCR to 0200 (from 0a20) [ 0.125624] weird, boot CPU (#0) not listedby the BIOS. [ 0.125635] SMP motherboard not detected. [ 0.125644] Local APIC not detected. Using dummy APIC emulation. [ 0.125651] SMP disabled [ 0.125847] Brought up 1 CPUs [ 0.125857] Total of 1 processors activated (1330.91 BogoMIPS). [ 0.125884] CPU0 attaching sched-domain: [ 0.125894] domain 0: span 0 [ 0.125901] groups: 0 [ 0.126666] net_namespace: 660 bytes [ 0.126696] Booting paravirtualized kernel on bare hardware [ 0.127585] NET: Registered protocol family 16 [ 0.128109] ACPI: bus type pci registered [ 0.128984] PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1 [ 0.128995] PCI: Using configuration type 1 for base access [ 0.129038] Setting up standard PCI resources [ 0.133077] ACPI: EC: Look up EC in DSDT [ 0.139751] ACPI: Interpreter enabled [ 0.139764] ACPI: (supports S0 S1 S3 S4 S5) [ 0.139817] ACPI: Using PIC for interrupt routing [ 0.147714] ACPI: Device [ECP] status [00000008]: functional but not present; setting present [ 0.149103] ACPI: Device [GAME] status [00000008]: functional but not present; setting present [ 0.149495] ACPI: Device [MIDI] status [00000008]: functional but not present; setting present [ 0.150124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.150538] pci 0000:00:1f.0: quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO [ 0.150551] pci 0000:00:1f.0: quirk: region f180-f1bf claimed by ICH4 GPIO [ 0.150929] PCI: Transparent bridge - 0000:00:1e.0 [ 0.150970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.151113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] [ 0.154758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.155061] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.155313] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.156150] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.156264] pnp: PnP ACPI init [ 0.156296] ACPI: bus type pnp registered [ 0.162980] pnp: PnP ACPI: found 16 devices [ 0.162992] ACPI: ACPI bus type pnp unregistered [ 0.163010] PnPBIOS: Disabled by ACPI PNP [ 0.163983] PCI: Using ACPI for IRQ routing [ 0.164721] ACPI: RTC can wake from S4 [ 0.164827] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.164839] system 00:02: ioport range 0xf000-0xf07f has been reserved [ 0.164850] system 00:02: ioport range 0xf100-0xf10f has been reserved [ 0.164859] system 00:02: ioport range 0xf180-0xf1bf has been reserved [ 0.164869] system 00:02: ioport range 0xf800-0xf81f has been reserved [ 0.164879] system 00:02: ioport range 0xf820-0xf82f has been reserved [ 0.164888] system 00:02: ioport range 0xfe00-0xfe00 has been reserved [ 0.196374] PCI: Bridge: 0000:00:1e.0 [ 0.196385] IO window: 3000-3fff [ 0.196398] MEM window: 0xf4100000-0xf41fffff [ 0.196408] PREFETCH window: 0x0000000020000000-0x00000000200fffff [ 0.196437] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.196526] NET: Registered protocol family 2 [ 0.196875] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.197605] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.197837] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.198056] TCP: Hash tables configured (established 8192 bind 8192) [ 0.198064] TCP reno registered [ 0.198384] NET: Registered protocol family 1 [ 0.198787] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 1.043547] it is [ 2.043043] Freeing initrd memory: 6071k freed [ 2.043634] Simple Boot Flag at 0x69 set to 0x1 [ 2.044985] audit: initializing netlink socket (disabled) [ 2.045037] type=2000 audit(1267086138.044:1): initialized [ 2.045430] Total HugeTLB memory allocated, 0 [ 2.045680] VFS: Disk quotas dquot_6.5.1 [ 2.045790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.045931] msgmni has been set to 498 [ 2.046387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.046400] io scheduler noop registered [ 2.046407] io scheduler anticipatory registered [ 2.046413] io scheduler deadline registered [ 2.046456] io scheduler cfq registered (default) [ 2.046502] pci 0000:00:01.0: Boot video device [ 2.046576] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 2.047691] isapnp: Scanning for PnP cards... [ 2.402062] isapnp: No Plug & Play device found [ 2.411901] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.412215] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.412453] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.413649] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.414036] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.419211] brd: module loaded [ 2.419579] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.422568] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.422590] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.423116] mice: PS/2 mouse device common for all mice [ 2.423545] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.423579] rtc0: alarms up to one month, y3k [ 2.423705] cpuidle: using governor ladder [ 2.423714] cpuidle: using governor menu [ 2.423729] No iBFT detected. [ 2.425408] TCP cubic registered [ 2.425420] NET: Registered protocol family 17 [ 2.425441] Using IPI No-Shortcut mode [ 2.425887] registered taskstats version 1 [ 2.426201] rtc_cmos 00:04: setting system clock to 2010-02-25 08:22:19 UTC (1267086139) [ 2.427019] Freeing unused kernel memory: 244k freed [ 2.450763] input: AT Translated Set 2 keyboard as /class/input/input0 [ 2.767639] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.248184] Uniform Multi-Platform E-IDE driver [ 4.248205] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 4.373755] ICH: IDE controller (0x8086:0x2411 rev 0x02) at PCI slot 0000:00:1f.1 [ 4.373798] ICH: not 100% native mode: will probe irqs later [ 4.373829] ide0: BM-DMA at 0x1c00-0x1c07 [ 4.373849] ide1: BM-DMA at 0x1c08-0x1c0f [ 4.373862] Probing IDE interface ide0... [ 4.383037] usbcore: registered new interface driver usbfs [ 4.383121] usbcore: registered new interface driver hub [ 4.383241] usbcore: registered new device driver usb [ 4.444677] USB Universal Host Controller Interface driver v3.0 [ 4.660263] hda: Maxtor 31024H2, ATA DISK drive [ 4.920659] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 4.920675] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.332255] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.332446] hda: UDMA/66 mode selected [ 5.332630] Probing IDE interface ide1... [ 5.476196] Floppy drive(s): fd0 is 1.44M [ 5.496358] FDC 0 is a National Semiconductor PC87306 [ 6.068203] hdc: TSSTcorpDVD-ROM SH-D162D, ATAPI CD/DVD-ROM drive [ 6.740185] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.740387] hdc: UDMA/33 mode selected [ 6.740795] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.742541] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.744552] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 6.744567] PCI: setting IRQ 9 as level-triggered [ 6.744575] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 6.744606] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 6.744616] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 6.744881] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 6.744928] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001400 [ 6.745235] usb usb1: configuration #1 chosen from 1 choice [ 6.745335] hub 1-0:1.0: USB hub found [ 6.745368] hub 1-0:1.0: 2 ports detected [ 6.848396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.848411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.848420] usb usb1: Product: UHCI Host Controller [ 6.848427] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 6.848435] usb usb1: SerialNumber: 0000:00:1f.2 [ 6.848667] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 6.937448] e100: eth0: e100_probe: addr 0xf4120000, irq 9, MAC addr 00:30:05:05:5e:c0 [ 6.946024] No dock devices found. [ 6.986850] SCSI subsystem initialized [ 7.068652] libata version 3.00 loaded. [ 7.276334] hda: max request size: 128KiB [ 7.281744] hda: 20010816 sectors (10245 MB) w/512KiB Cache, CHS=19852/16/63 [ 7.281763] hda: cache flushes not supported [ 7.281903] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > [ 7.365642] hdc: ATAPI 32X DVD-ROM drive, 198kB Cache [ 7.365662] Uniform CD-ROM driver Revision: 3.20 [ 8.381023] PM: Starting manual resume from disk [ 8.512242] kjournald starting. Commit interval 5 seconds [ 8.512280] EXT3-fs: mounted filesystem with ordered data mode. [ 11.538090] udevd version 125 started [ 15.036484] input: PC Speaker as /class/input/input1 [ 15.726945] Linux agpgart interface v0.103 [ 15.824154] agpgart: Detected an Intel i810 Chipset. [ 15.835989] agpgart: AGP aperture is 64M @ 0xf8000000 [ 15.859185] Intel 82802 RNG detected [ 16.094257] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.101767] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.123983] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 16.123997] PCI: setting IRQ 5 as level-triggered [ 16.124089] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 17.493641] input: PS/2 Logitech Mouse as /class/input/input2 [ 17.743470] input: Power Button (FF) as /class/input/input3 [ 17.766211] ACPI: Power Button (FF) [PWRF] [ 17.766443] input: Power Button (CM) as /class/input/input4 [ 17.793875] ACPI: Power Button (CM) [PWRB] [ 18.970504] parport_pc 00:0a: reported by Plug and Play ACPI [ 18.970577] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.066737] parport_pc 00:0b: unable to assign resources [ 19.066813] parport_pc: probe of 00:0b failed with error -16 [ 19.243477] ns558 00:0e: activated [ 19.263539] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 890kHz [ 19.411206] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 19.411260] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 20.080102] intel8x0_measure_ac97_clock: measured 54661 usecs [ 20.080117] intel8x0: clocking to 48000 [ 20.743840] mpu401 00:0f: activated [ 23.588633] Adding 578300k swap on /dev/hda7. Priority:-1 extents:1 across:578300k [ 24.158655] EXT3 FS on hda1, internal journal [ 24.693148] loop: module loaded [ 26.360577] kjournald starting. Commit interval 5 seconds [ 26.364229] EXT3 FS on hda9, internal journal [ 26.364244] EXT3-fs: mounted filesystem with ordered data mode. [ 26.396021] kjournald starting. Commit interval 5 seconds [ 26.396021] EXT3 FS on hda8, internal journal [ 26.396021] EXT3-fs: mounted filesystem with ordered data mode. [ 26.448950] kjournald starting. Commit interval 5 seconds [ 26.452245] EXT3 FS on hda5, internal journal [ 26.452260] EXT3-fs: mounted filesystem with ordered data mode. [ 26.512977] kjournald starting. Commit interval 5 seconds [ 26.516248] EXT3 FS on hda6, internal journal [ 26.516262] EXT3-fs: mounted filesystem with ordered data mode. [ 29.604291] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 30.935442] NET: Registered protocol family 10 [ 30.937014] lo: Disabled Privacy Extensions [ 41.592030] eth0: no IPv6 routers present [ 60.240327] lp0: using parport0 (interrupt-driven). [ 60.299998] ppdev: user-space parallel port driver [ 63.251388] RPC: Registered udp transport module. [ 63.251401] RPC: Registered tcp transport module. [ 63.433465] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 63.574670] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 63.600016] NFSD: starting 90-second grace period [ 68.965893] Bluetooth: Core ver 2.11 [ 68.974354] NET: Registered protocol family 31 [ 68.974366] Bluetooth: HCI device and connection manager initialized [ 68.974377] Bluetooth: HCI socket layer initialized [ 69.137281] Bluetooth: L2CAP ver 2.9 [ 69.137292] Bluetooth: L2CAP socket layer initialized [ 69.399521] Bluetooth: RFCOMM socket layer initialized [ 69.399572] Bluetooth: RFCOMM TTY layer initialized [ 69.399580] Bluetooth: RFCOMM ver 1.8 [ 73.656654] NET: Registered protocol family 5 [ 76.326620] [drm] Initialized drm 1.1.0 20060810 [ 76.344889] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 76.344904] PCI: setting IRQ 11 as level-triggered [ 76.344913] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 76.344932] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 76.345012] mtrr: no more MTRRs available [ 76.345144] [drm] Initialized i810 1.4.0 20030605 on minor 0 [ 76.346185] mtrr: base(0xf8000000) is not aligned on a size(0x258000) boundary [ 77.072143] [drm] Using v1.4 init. [ 77.078121] mtrr: no more MTRRs available [ 80.240031] [drm:drm_release] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 80.240042] driver to use reclaim_buffers_idlelocked() instead. [ 80.240047] I will go on reclaiming the buffers anyway. === 00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Siemens Nixdorf AG Device 004a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> Kernel modules: i2c-i810 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: f4100000-f41fffff Prefetchable memory behind bridge: 20000000-200fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801AA IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 1c00 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801AA USB Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at 1400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02) Subsystem: Intel Corporation 82801AA SMBus Controller Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 1800 [size=16] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02) Subsystem: Siemens Nixdorf AG Device 0049 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 1000 [size=256] Region 1: I/O ports at 2000 [size=64] Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 01:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09) Subsystem: Siemens Nixdorf AG Device 004b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at f4120000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3400 [size=64] Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at 20000000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 Kernel modules: e100, eepro100 === X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux debian504scenic 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 Build Date: 08 June 2009 09:12:57AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 25 09:23:29 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) |-->Input Device "Configured Mouse" (==) |-->Input Device "Generic Keyboard" (==) The core pointer device wasn't specified explicitly in the layout. Using the first mouse device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81e38c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 110a,004a rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 110a,0049 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:08:0: chip 8086,1229 card 110a,004b rev 09 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0007 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x20000000 - 0x200fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/26, 0xf4000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [1] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [4] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [5] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [7] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [8] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [1] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [4] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [5] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [7] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [8] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [14] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [15] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) Matched intel from file name intel.ids in autoconfig (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.4.2, module version = 2.3.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00:01:0 (--) Assigning device section with no busID to primary device (--) Chipset i810e found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [14] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [15] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [14] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [16] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [17] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [18] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 2.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 16/16 (==) intel(0): Depth 16, (==) framebuffer bpp 16 (==) intel(0): RGB weight 565 (==) intel(0): Default visual is TrueColor (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (II) intel(0): initializing int10 (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 2.0 (II) intel(0): VESA VBE Total Mem: 1024 kB (II) intel(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 3.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: i810 Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) intel(0): VESA VBE DDC supported (II) intel(0): VESA VBE DDC Level 2 (II) intel(0): VESA VBE DDC transfer in appr. 1 sec. (II) intel(0): VESA VBE DDC read successfully (WW) EDID preferred timing clock 110.16MHz exceeds claimed max 110MHz, fixing (II) intel(0): Manufacturer: FUJ Model: 770 Serial#: 16843009 (II) intel(0): Year: 1999 Week: 38 (II) intel(0): EDID Version: 1.1 (II) intel(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) intel(0): Sync: Separate (II) intel(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23 (II) intel(0): Gamma: 1.35 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): redX: 0.609 redY: 0.342 greenX: 0.298 greenY: 0.588 (II) intel(0): blueX: 0.150 blueY: 0.063 whiteX: 0.280 whiteY: 0.311 (II) intel(0): Supported VESA Video Modes: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@70Hz (II) intel(0): 1024x768@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported Future Video Modes: (II) intel(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993 (II) intel(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 110.2 MHz Image Size: 306 x 230 mm (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1508 h_blank_end 1728 h_border: 0 (II) intel(0): v_active: 1024 v_sync: 1026 v_sync_end 1029 v_blanking: 1067 v_border: 0 (II) intel(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72 kHz, PixClock max 111 MHz (II) intel(0): Monitor name: FUJITSU 770 (II) intel(0): Serial No: C991430504 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff001aaa700701010101 (II) intel(0): 26090101281f1723e8269e9c574c9626 (II) intel(0): 10474fa10e00314a3159615981400101 (II) intel(0): 010101010101082b00c051002b4040a4 (II) intel(0): 230032e610000018000000fd0032781e (II) intel(0): 480b000a202020202020000000fc0046 (II) intel(0): 554a49545355203737302020000000ff (II) intel(0): 00433939313433303530340a20200036 (II) intel(0): EDID vendor "FUJ", prod id 1904 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 110.16 1280 1344 1508 1728 1024 1026 1029 1067 -hsync -vsync (63.8 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "640x480"x69.6 28.00 640 664 720 800 480 483 487 503 -hsync +vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (--) intel(0): Chipset: "i810e" (--) intel(0): Linear framebuffer at 0xF8000000 (--) intel(0): IO registers at addr 0xF4000000 (II) intel(0): Kernel reported 51712 total, 1 used (II) intel(0): I810CheckAvailableMemory: 206844k available (==) intel(0): Will alloc AGP framebuffer: 24576 kByte (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) intel(0): Configured Monitor: Using hsync range of 30.00-72.00 kHz (II) intel(0): Configured Monitor: Using vrefresh range of 50.00-120.00 Hz (II) intel(0): Configured Monitor: Using maximum pixel clock of 111.00 MHz (II) intel(0): Estimated virtual size for aspect ratio 1.3478 is 1280x960 (II) intel(0): Clock range: 9.50 to 163.00 MHz (II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (unknown reason) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (width too large for virtual size) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (width too large for virtual size) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (width too large for virtual size) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (width too large for virtual size) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1440x900" (width too large for virtual size) (II) intel(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1024" (width too large for virtual size) (II) intel(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (width too large for virtual size) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (width too large for virtual size) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (width too large for virtual size) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using driver mode "1280x1024" (height too large for virtual size) (--) intel(0): Virtual size is 1280x960 (pitch 1280) (**) intel(0): *Driver mode "1280x960": 101.2 MHz, 59.7 kHz, 59.9 Hz (II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (**) intel(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (**) intel(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz (II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz) (**) intel(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) intel(0): *Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz (II) intel(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz) (**) intel(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) intel(0): Modeline "1152x768"x54.8 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (44.2 kHz) (**) intel(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 84.9 Hz (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (**) intel(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (**) intel(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) intel(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) intel(0): *Driver mode "640x480": 35.0 MHz, 42.9 kHz, 84.6 Hz (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (**) intel(0): *Driver mode "640x480": 28.0 MHz, 35.0 kHz, 69.6 Hz (II) intel(0): Modeline "640x480"x69.6 28.00 640 664 720 800 480 483 487 503 -hsync +vsync (35.0 kHz) (**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) intel(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (**) intel(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (**) intel(0): Display dimensions: (310, 230) mm (**) intel(0): DPI set to (104, 106) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in (**) intel(0): page flipping disabled (II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B] [1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [7] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [16] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [17] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [18] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [19] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [20] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:01.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0 (II) [drm] loaded kernel module for "i810" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer handle = 0xf8000000 (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (II) intel(0): [drm] Registers = 0xf4000000 (II) intel(0): [agp] dcacheHandle : 0x0 (II) intel(0): [agp] GART: no dcache memory found (II) intel(0): [agp] Bound backbuffer memory (II) intel(0): [agp] Bound depthbuffer memory (II) intel(0): [agp] Bound System Texture Memory (II) intel(0): [agp] GART: Allocated 4K for mouse cursor image (II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image (II) intel(0): Adding 384 scanlines for pixmap caching (II) intel(0): Allocated Scratch Memory (II) intel(0): [dri] Buffer map : f7b000 (II) intel(0): [drm] added 256 4096 byte DMA buffers (II) intel(0): [drm] Init v1.4 interface. (II) intel(0): [drm] dma control initialized, using IRQ -22 (II) intel(0): [dri] visual configs initialized. (WW) intel(0): Failed to set up write-combining range (0xf8000000,0x4000000) (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) intel(0): Setting dot clock to 101.3 MHz [ 0x24 0x7 0x20 ] [ 38 9 2 ] (II) intel(0): chose watermark 0x22210000: (tab.freq 108.0) (II) intel(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Setting up tile and stipple cache: 30 128x128 slots (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): DPMS enabled (II) intel(0): [DRI] installation complete (II) intel(0): Direct rendering enabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:01.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (WW) Configured Mouse: No Device specified, looking for one... (II) Configured Mouse: Setting Device option to "/dev/input/mice" (--) Configured Mouse: Device: "/dev/input/mice" (==) Configured Mouse: Protocol: "Auto" (**) Option "CorePointer" (**) Configured Mouse: always reports core events (==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (**) Configured Mouse: Sensitivity: 1 (**) Option "CoreKeyboard" (**) Generic Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc104" (**) Generic Keyboard: XkbModel: "pc104" (**) Option "XkbLayout" "us" (**) Generic Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (II) evaluating device (Configured Mouse) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) evaluating device (Generic Keyboard) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2" (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) 3rd Button detected: disabling emulate3Button -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="5.0 (lenny) - installer build 20090123lenny6" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== umame -a: Linux debian504scenic 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub [8086:7124] (rev 03) lspci -knn: 00:01.0 VGA compatible controller [0300]: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller [8086:7125] (rev 03) lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02) lspci -knn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller [8086:2411] (rev 02) lspci -knn: Kernel driver in use: PIIX_IDE lspci -knn: Kernel modules: piix lspci -knn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB Controller [8086:2412] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413] (rev 02) lspci -knn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 02) lspci -knn: 01:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 09) lspci -knn: Kernel driver in use: e100 lspci -knn: Kernel modules: e100, eepro100 lsmod: Module Size Used by lsmod: ufs 63620 0 lsmod: qnx4 7684 0 lsmod: ntfs 180544 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187264 0 lsmod: jfs 148188 0 lsmod: ext3 103688 5 lsmod: jbd 35092 1 ext3 lsmod: vfat 8832 0 lsmod: fat 39964 1 vfat lsmod: ext2 52744 0 lsmod: mbcache 6656 2 ext3,ext2 lsmod: e100 29196 0 lsmod: mii 4864 1 e100 lsmod: nls_utf8 1664 2 lsmod: isofs 27684 0 lsmod: nls_base 6528 6 ntfs,jfs,vfat,fat,nls_utf8,isofs lsmod: zlib_inflate 13952 1 isofs lsmod: rsrc_nonstatic 9344 0 lsmod: pcmcia_core 31760 1 rsrc_nonstatic lsmod: ide_generic 2432 0 [permanent] lsmod: usb_storage 76352 0 lsmod: scsi_mod 129548 1 usb_storage lsmod: vga16fb 11276 2 lsmod: vgastate 7552 1 vga16fb lsmod: fan 4100 0 lsmod: ide_cd_mod 27524 0 lsmod: cdrom 30112 1 ide_cd_mod lsmod: ide_disk 10368 7 lsmod: parport_pc 22308 0 lsmod: parport 30152 1 parport_pc lsmod: floppy 47748 0 lsmod: uhci_hcd 18320 0 lsmod: piix 6404 0 [permanent] lsmod: thermal 15004 0 lsmod: processor 27824 1 thermal lsmod: thermal_sys 10656 3 fan,thermal,processor lsmod: usbcore 117104 3 usb_storage,uhci_hcd lsmod: ide_core 94760 4 ide_generic,ide_cd_mod,ide_disk,piix df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 127768 524 127244 0% /dev df: /dev/hda1 334460 101987 215205 32% /target df: /dev/hda9 3462956 71636 3215412 2% /target/home df: /dev/hda8 303344 10293 277390 4% /target/tmp df: /dev/hda5 3462956 2199840 1087208 67% /target/usr df: /dev/hda6 1699804 1089580 523880 68% /target/var df: /dev/hda1 334460 101987 215205 32% /dev/.static/dev df: tmpfs 127768 524 127244 0% /target/dev free: total used free shared buffers free: Mem: 255540 221016 34524 0 15276 free: Swap: 578300 3560 574740 free: Total: 833840 224576 609264 /proc/cmdline: vga=normal initrd=/install.386/initrd.gz -- quiet BOOT_IMAGE=/install.386/vmlinuz /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 8 /proc/cpuinfo: model name : Pentium III (Coppermine) /proc/cpuinfo: stepping : 3 /proc/cpuinfo: cpu MHz : 664.543 /proc/cpuinfo: cache size : 256 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 2 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse /proc/cpuinfo: bogomips : 1330.51 /proc/cpuinfo: clflush size : 32 /proc/cpuinfo: power management: /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:1f.1 /proc/ioports: 0170-0177 : ICH /proc/ioports: 01f0-01f7 : 0000:00:1f.1 /proc/ioports: 01f0-01f7 : ICH /proc/ioports: 02f8-02ff : serial /proc/ioports: 0376-0376 : 0000:00:1f.1 /proc/ioports: 0376-0376 : ICH /proc/ioports: 0378-037a : parport0 /proc/ioports: 03c0-03df : vga+ /proc/ioports: 03f2-03f2 : floppy /proc/ioports: 03f4-03f5 : floppy /proc/ioports: 03f6-03f6 : 0000:00:1f.1 /proc/ioports: 03f6-03f6 : ICH /proc/ioports: 03f7-03f7 : floppy /proc/ioports: 03f8-03ff : serial /proc/ioports: 04d0-04d1 : pnp 00:02 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 1000-10ff : 0000:00:1f.5 /proc/ioports: 1400-141f : 0000:00:1f.2 /proc/ioports: 1400-141f : uhci_hcd /proc/ioports: 1800-180f : 0000:00:1f.3 /proc/ioports: 1c00-1c0f : 0000:00:1f.1 /proc/ioports: 1c00-1c0f : ICH /proc/ioports: 2000-203f : 0000:00:1f.5 /proc/ioports: 3000-3fff : PCI Bus 0000:01 /proc/ioports: 3400-343f : 0000:01:08.0 /proc/ioports: 3400-343f : e100 /proc/ioports: f000-f07f : 0000:00:1f.0 /proc/ioports: f000-f07f : pnp 00:02 /proc/ioports: f000-f003 : ACPI PM1a_EVT_BLK /proc/ioports: f004-f005 : ACPI PM1a_CNT_BLK /proc/ioports: f008-f00b : ACPI PM_TMR /proc/ioports: f010-f015 : ACPI CPU throttle /proc/ioports: f028-f02b : ACPI GPE0_BLK /proc/ioports: f02c-f02f : ACPI GPE1_BLK /proc/ioports: f100-f10f : pnp 00:02 /proc/ioports: f180-f1bf : 0000:00:1f.0 /proc/ioports: f180-f1bf : pnp 00:02 /proc/ioports: f800-f81f : pnp 00:02 /proc/ioports: f820-f82f : pnp 00:02 /proc/ioports: fe00-fe00 : pnp 00:02 /proc/iomem: 00000000-0009f7ff : System RAM /proc/iomem: 0009f800-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-0feeffff : System RAM /proc/iomem: 00100000-002a8280 : Kernel code /proc/iomem: 002a8281-00362fff : Kernel data /proc/iomem: 003b6000-0040fbd7 : Kernel bss /proc/iomem: 0fef0000-0feffbff : ACPI Tables /proc/iomem: 0feffc00-0fefffff : ACPI Non-volatile Storage /proc/iomem: 0ff00000-0fffffff : reserved /proc/iomem: 20000000-200fffff : PCI Bus 0000:01 /proc/iomem: 20000000-200fffff : 0000:01:08.0 /proc/iomem: f4000000-f407ffff : 0000:00:01.0 /proc/iomem: f4100000-f41fffff : PCI Bus 0000:01 /proc/iomem: f4100000-f411ffff : 0000:01:08.0 /proc/iomem: f4100000-f411ffff : e100 /proc/iomem: f4120000-f4120fff : 0000:01:08.0 /proc/iomem: f4120000-f4120fff : e100 /proc/iomem: f8000000-fbffffff : 0000:00:01.0 /proc/iomem: fff00000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 1978841 XT-PIC-XT timer /proc/interrupts: 1: 518 XT-PIC-XT i8042 /proc/interrupts: 2: 0 XT-PIC-XT cascade /proc/interrupts: 3: 2 XT-PIC-XT /proc/interrupts: 4: 2 XT-PIC-XT /proc/interrupts: 6: 7 XT-PIC-XT floppy /proc/interrupts: 7: 0 XT-PIC-XT parport0 /proc/interrupts: 8: 0 XT-PIC-XT rtc0 /proc/interrupts: 9: 893443 XT-PIC-XT acpi, uhci_hcd:usb1, eth0 /proc/interrupts: 12: 3 XT-PIC-XT i8042 /proc/interrupts: 14: 243753 XT-PIC-XT ide0 /proc/interrupts: 15: 3475 XT-PIC-XT ide1 /proc/interrupts: NMI: 0 Non-maskable interrupts /proc/interrupts: LOC: 0 Local timer interrupts /proc/interrupts: TRM: 0 Thermal event interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 255540 kB /proc/meminfo: MemFree: 34548 kB /proc/meminfo: Buffers: 15276 kB /proc/meminfo: Cached: 176308 kB /proc/meminfo: SwapCached: 2876 kB /proc/meminfo: Active: 85556 kB /proc/meminfo: Inactive: 115760 kB /proc/meminfo: SwapTotal: 578300 kB /proc/meminfo: SwapFree: 574740 kB /proc/meminfo: Dirty: 684 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 7352 kB /proc/meminfo: Mapped: 1564 kB /proc/meminfo: Slab: 14444 kB /proc/meminfo: SReclaimable: 11060 kB /proc/meminfo: SUnreclaim: 3384 kB /proc/meminfo: PageTables: 292 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 706068 kB /proc/meminfo: Committed_AS: 14056 kB /proc/meminfo: VmallocTotal: 777924 kB /proc/meminfo: VmallocUsed: 4108 kB /proc/meminfo: VmallocChunk: 773328 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Sincerely yours, 藻留天 具留部覧度船 Morten Gulbrandsen _____________________________________________________________________ Java programmer, C++ programmer CAcert Assurer, GSWoT introducer, thawte Notary Gossamer Spider Web of Trust http://www.gswot.org Please consider the environment before printing this e-mail!
X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux debian504scenic 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 Build Date: 08 June 2009 09:12:57AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 25 09:23:29 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) |-->Input Device "Configured Mouse" (==) |-->Input Device "Generic Keyboard" (==) The core pointer device wasn't specified explicitly in the layout. Using the first mouse device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81e38c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 110a,004a rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 110a,0049 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:08:0: chip 8086,1229 card 110a,004b rev 09 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0007 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x20000000 - 0x200fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/26, 0xf4000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [1] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [4] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [5] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [7] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [8] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [1] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [4] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [5] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [7] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [8] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [14] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [15] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) Matched intel from file name intel.ids in autoconfig (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.4.2, module version = 2.3.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00:01:0 (--) Assigning device section with no busID to primary device (--) Chipset i810e found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [14] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [15] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [5] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [14] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [16] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [17] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [18] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 2.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 16/16 (==) intel(0): Depth 16, (==) framebuffer bpp 16 (==) intel(0): RGB weight 565 (==) intel(0): Default visual is TrueColor (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (II) intel(0): initializing int10 (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 2.0 (II) intel(0): VESA VBE Total Mem: 1024 kB (II) intel(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 3.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: i810 Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) intel(0): VESA VBE DDC supported (II) intel(0): VESA VBE DDC Level 2 (II) intel(0): VESA VBE DDC transfer in appr. 1 sec. (II) intel(0): VESA VBE DDC read successfully (WW) EDID preferred timing clock 110.16MHz exceeds claimed max 110MHz, fixing (II) intel(0): Manufacturer: FUJ Model: 770 Serial#: 16843009 (II) intel(0): Year: 1999 Week: 38 (II) intel(0): EDID Version: 1.1 (II) intel(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) intel(0): Sync: Separate (II) intel(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23 (II) intel(0): Gamma: 1.35 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): redX: 0.609 redY: 0.342 greenX: 0.298 greenY: 0.588 (II) intel(0): blueX: 0.150 blueY: 0.063 whiteX: 0.280 whiteY: 0.311 (II) intel(0): Supported VESA Video Modes: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@70Hz (II) intel(0): 1024x768@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported Future Video Modes: (II) intel(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993 (II) intel(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 110.2 MHz Image Size: 306 x 230 mm (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1508 h_blank_end 1728 h_border: 0 (II) intel(0): v_active: 1024 v_sync: 1026 v_sync_end 1029 v_blanking: 1067 v_border: 0 (II) intel(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72 kHz, PixClock max 111 MHz (II) intel(0): Monitor name: FUJITSU 770 (II) intel(0): Serial No: C991430504 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff001aaa700701010101 (II) intel(0): 26090101281f1723e8269e9c574c9626 (II) intel(0): 10474fa10e00314a3159615981400101 (II) intel(0): 010101010101082b00c051002b4040a4 (II) intel(0): 230032e610000018000000fd0032781e (II) intel(0): 480b000a202020202020000000fc0046 (II) intel(0): 554a49545355203737302020000000ff (II) intel(0): 00433939313433303530340a20200036 (II) intel(0): EDID vendor "FUJ", prod id 1904 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 110.16 1280 1344 1508 1728 1024 1026 1029 1067 -hsync -vsync (63.8 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "640x480"x69.6 28.00 640 664 720 800 480 483 487 503 -hsync +vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (--) intel(0): Chipset: "i810e" (--) intel(0): Linear framebuffer at 0xF8000000 (--) intel(0): IO registers at addr 0xF4000000 (II) intel(0): Kernel reported 51712 total, 1 used (II) intel(0): I810CheckAvailableMemory: 206844k available (==) intel(0): Will alloc AGP framebuffer: 24576 kByte (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) intel(0): Configured Monitor: Using hsync range of 30.00-72.00 kHz (II) intel(0): Configured Monitor: Using vrefresh range of 50.00-120.00 Hz (II) intel(0): Configured Monitor: Using maximum pixel clock of 111.00 MHz (II) intel(0): Estimated virtual size for aspect ratio 1.3478 is 1280x960 (II) intel(0): Clock range: 9.50 to 163.00 MHz (II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (unknown reason) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (height too large for virtual size) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (width too large for virtual size) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (width too large for virtual size) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (width too large for virtual size) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (width too large for virtual size) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (width too large for virtual size) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (width too large for virtual size) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1440x900" (width too large for virtual size) (II) intel(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1024" (width too large for virtual size) (II) intel(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (width too large for virtual size) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (width too large for virtual size) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (width too large for virtual size) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (width too large for virtual size) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (width too large for virtual size) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using driver mode "1280x1024" (height too large for virtual size) (--) intel(0): Virtual size is 1280x960 (pitch 1280) (**) intel(0): *Driver mode "1280x960": 101.2 MHz, 59.7 kHz, 59.9 Hz (II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (**) intel(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (**) intel(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz (II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz) (**) intel(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) intel(0): *Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz (II) intel(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz) (**) intel(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) intel(0): Modeline "1152x768"x54.8 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (44.2 kHz) (**) intel(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 84.9 Hz (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (**) intel(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (**) intel(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) intel(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) intel(0): *Driver mode "640x480": 35.0 MHz, 42.9 kHz, 84.6 Hz (II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (**) intel(0): *Driver mode "640x480": 28.0 MHz, 35.0 kHz, 69.6 Hz (II) intel(0): Modeline "640x480"x69.6 28.00 640 664 720 800 480 483 487 503 -hsync +vsync (35.0 kHz) (**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) intel(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (**) intel(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (**) intel(0): Display dimensions: (310, 230) mm (**) intel(0): DPI set to (104, 106) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in (**) intel(0): page flipping disabled (II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B] [1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xf4100000 - 0xf411ffff (0x20000) MX[B] [7] -1 0 0xf4120000 - 0xf4120fff (0x1000) MX[B] [8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00003400 - 0x0000343f (0x40) IX[B] [16] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [17] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] [18] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [19] -1 0 0x00001400 - 0x0000141f (0x20) IX[B] [20] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B] [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:01.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0 (II) [drm] loaded kernel module for "i810" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer handle = 0xf8000000 (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (II) intel(0): [drm] Registers = 0xf4000000 (II) intel(0): [agp] dcacheHandle : 0x0 (II) intel(0): [agp] GART: no dcache memory found (II) intel(0): [agp] Bound backbuffer memory (II) intel(0): [agp] Bound depthbuffer memory (II) intel(0): [agp] Bound System Texture Memory (II) intel(0): [agp] GART: Allocated 4K for mouse cursor image (II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image (II) intel(0): Adding 384 scanlines for pixmap caching (II) intel(0): Allocated Scratch Memory (II) intel(0): [dri] Buffer map : f7b000 (II) intel(0): [drm] added 256 4096 byte DMA buffers (II) intel(0): [drm] Init v1.4 interface. (II) intel(0): [drm] dma control initialized, using IRQ -22 (II) intel(0): [dri] visual configs initialized. (WW) intel(0): Failed to set up write-combining range (0xf8000000,0x4000000) (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) intel(0): Setting dot clock to 101.3 MHz [ 0x24 0x7 0x20 ] [ 38 9 2 ] (II) intel(0): chose watermark 0x22210000: (tab.freq 108.0) (II) intel(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Setting up tile and stipple cache: 30 128x128 slots (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): DPMS enabled (II) intel(0): [DRI] installation complete (II) intel(0): Direct rendering enabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:01.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (WW) Configured Mouse: No Device specified, looking for one... (II) Configured Mouse: Setting Device option to "/dev/input/mice" (--) Configured Mouse: Device: "/dev/input/mice" (==) Configured Mouse: Protocol: "Auto" (**) Option "CorePointer" (**) Configured Mouse: always reports core events (==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (**) Configured Mouse: Sensitivity: 1 (**) Option "CoreKeyboard" (**) Generic Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc104" (**) Generic Keyboard: XkbModel: "pc104" (**) Option "XkbLayout" "us" (**) Generic Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (II) evaluating device (Configured Mouse) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) evaluating device (Generic Keyboard) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2" (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) 3rd Button detected: disabling emulate3Button
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Feb 10 08:59:21 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5800 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) [ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 254MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 65264) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 65264 [ 0.000000] HighMem 65264 -> 65264 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 65264 [ 0.000000] On node 0 totalpages: 65264 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 478 pages used for memmap [ 0.000000] Normal zone: 60690 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F6E80, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 0FEFD671, 002C (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 0FEFD69D, 0074 (r1 FSC D1170/71 6040000 F4240) [ 0.000000] ACPI: DSDT 0FEFD711, 24C8 (r1 FSC D1170/71 6040000 MSFT 100000C) [ 0.000000] ACPI: FACS 0FEFFFC0, 0040 [ 0.000000] ACPI: BOOT 0FEFFBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Fujitsu Siemens [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64754 [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0120c000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 664.564 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.004000] Memory: 248900k/261056k available (1771k kernel code, 11628k reserved, 750k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 0.004000] lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02bacb5 - 0xc0376620 ( 750 kB) [ 0.004000] .text : 0xc0100000 - 0xc02bacb5 (1771 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084397] Calibrating delay using timer specific routine.. 1330.91 BogoMIPS (lpj=2661827) [ 0.084516] Security Framework initialized [ 0.084536] SELinux: Disabled at boot. [ 0.084550] Capability LSM initialized [ 0.084602] Mount-cache hash table entries: 512 [ 0.085026] Initializing cgroup subsys ns [ 0.085039] Initializing cgroup subsys cpuacct [ 0.085047] Initializing cgroup subsys devices [ 0.085106] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.085117] CPU: L2 cache: 256K [ 0.085131] Intel machine check architecture supported. [ 0.085143] Intel machine check reporting enabled on CPU#0. [ 0.085183] Checking 'hlt' instruction... OK. [ 0.100924] SMP alternatives: switching to UP code [ 0.114197] Freeing SMP alternatives: 16k freed [ 0.114210] ACPI: Core revision 20080321 [ 0.121550] ACPI: setting ELCR to 0200 (from 0a20) [ 0.125624] weird, boot CPU (#0) not listedby the BIOS. [ 0.125635] SMP motherboard not detected. [ 0.125644] Local APIC not detected. Using dummy APIC emulation. [ 0.125651] SMP disabled [ 0.125847] Brought up 1 CPUs [ 0.125857] Total of 1 processors activated (1330.91 BogoMIPS). [ 0.125884] CPU0 attaching sched-domain: [ 0.125894] domain 0: span 0 [ 0.125901] groups: 0 [ 0.126666] net_namespace: 660 bytes [ 0.126696] Booting paravirtualized kernel on bare hardware [ 0.127585] NET: Registered protocol family 16 [ 0.128109] ACPI: bus type pci registered [ 0.128984] PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1 [ 0.128995] PCI: Using configuration type 1 for base access [ 0.129038] Setting up standard PCI resources [ 0.133077] ACPI: EC: Look up EC in DSDT [ 0.139751] ACPI: Interpreter enabled [ 0.139764] ACPI: (supports S0 S1 S3 S4 S5) [ 0.139817] ACPI: Using PIC for interrupt routing [ 0.147714] ACPI: Device [ECP] status [00000008]: functional but not present; setting present [ 0.149103] ACPI: Device [GAME] status [00000008]: functional but not present; setting present [ 0.149495] ACPI: Device [MIDI] status [00000008]: functional but not present; setting present [ 0.150124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.150538] pci 0000:00:1f.0: quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO [ 0.150551] pci 0000:00:1f.0: quirk: region f180-f1bf claimed by ICH4 GPIO [ 0.150929] PCI: Transparent bridge - 0000:00:1e.0 [ 0.150970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.151113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] [ 0.154758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.155061] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.155313] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.156150] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.156264] pnp: PnP ACPI init [ 0.156296] ACPI: bus type pnp registered [ 0.162980] pnp: PnP ACPI: found 16 devices [ 0.162992] ACPI: ACPI bus type pnp unregistered [ 0.163010] PnPBIOS: Disabled by ACPI PNP [ 0.163983] PCI: Using ACPI for IRQ routing [ 0.164721] ACPI: RTC can wake from S4 [ 0.164827] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.164839] system 00:02: ioport range 0xf000-0xf07f has been reserved [ 0.164850] system 00:02: ioport range 0xf100-0xf10f has been reserved [ 0.164859] system 00:02: ioport range 0xf180-0xf1bf has been reserved [ 0.164869] system 00:02: ioport range 0xf800-0xf81f has been reserved [ 0.164879] system 00:02: ioport range 0xf820-0xf82f has been reserved [ 0.164888] system 00:02: ioport range 0xfe00-0xfe00 has been reserved [ 0.196374] PCI: Bridge: 0000:00:1e.0 [ 0.196385] IO window: 3000-3fff [ 0.196398] MEM window: 0xf4100000-0xf41fffff [ 0.196408] PREFETCH window: 0x0000000020000000-0x00000000200fffff [ 0.196437] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.196526] NET: Registered protocol family 2 [ 0.196875] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.197605] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.197837] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.198056] TCP: Hash tables configured (established 8192 bind 8192) [ 0.198064] TCP reno registered [ 0.198384] NET: Registered protocol family 1 [ 0.198787] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 1.043547] it is [ 2.043043] Freeing initrd memory: 6071k freed [ 2.043634] Simple Boot Flag at 0x69 set to 0x1 [ 2.044985] audit: initializing netlink socket (disabled) [ 2.045037] type=2000 audit(1267086138.044:1): initialized [ 2.045430] Total HugeTLB memory allocated, 0 [ 2.045680] VFS: Disk quotas dquot_6.5.1 [ 2.045790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.045931] msgmni has been set to 498 [ 2.046387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.046400] io scheduler noop registered [ 2.046407] io scheduler anticipatory registered [ 2.046413] io scheduler deadline registered [ 2.046456] io scheduler cfq registered (default) [ 2.046502] pci 0000:00:01.0: Boot video device [ 2.046576] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 2.047691] isapnp: Scanning for PnP cards... [ 2.402062] isapnp: No Plug & Play device found [ 2.411901] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.412215] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.412453] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.413649] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.414036] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.419211] brd: module loaded [ 2.419579] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.422568] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.422590] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.423116] mice: PS/2 mouse device common for all mice [ 2.423545] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.423579] rtc0: alarms up to one month, y3k [ 2.423705] cpuidle: using governor ladder [ 2.423714] cpuidle: using governor menu [ 2.423729] No iBFT detected. [ 2.425408] TCP cubic registered [ 2.425420] NET: Registered protocol family 17 [ 2.425441] Using IPI No-Shortcut mode [ 2.425887] registered taskstats version 1 [ 2.426201] rtc_cmos 00:04: setting system clock to 2010-02-25 08:22:19 UTC (1267086139) [ 2.427019] Freeing unused kernel memory: 244k freed [ 2.450763] input: AT Translated Set 2 keyboard as /class/input/input0 [ 2.767639] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.248184] Uniform Multi-Platform E-IDE driver [ 4.248205] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 4.373755] ICH: IDE controller (0x8086:0x2411 rev 0x02) at PCI slot 0000:00:1f.1 [ 4.373798] ICH: not 100% native mode: will probe irqs later [ 4.373829] ide0: BM-DMA at 0x1c00-0x1c07 [ 4.373849] ide1: BM-DMA at 0x1c08-0x1c0f [ 4.373862] Probing IDE interface ide0... [ 4.383037] usbcore: registered new interface driver usbfs [ 4.383121] usbcore: registered new interface driver hub [ 4.383241] usbcore: registered new device driver usb [ 4.444677] USB Universal Host Controller Interface driver v3.0 [ 4.660263] hda: Maxtor 31024H2, ATA DISK drive [ 4.920659] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 4.920675] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.332255] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.332446] hda: UDMA/66 mode selected [ 5.332630] Probing IDE interface ide1... [ 5.476196] Floppy drive(s): fd0 is 1.44M [ 5.496358] FDC 0 is a National Semiconductor PC87306 [ 6.068203] hdc: TSSTcorpDVD-ROM SH-D162D, ATAPI CD/DVD-ROM drive [ 6.740185] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.740387] hdc: UDMA/33 mode selected [ 6.740795] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.742541] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.744552] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 6.744567] PCI: setting IRQ 9 as level-triggered [ 6.744575] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 6.744606] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 6.744616] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 6.744881] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 6.744928] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001400 [ 6.745235] usb usb1: configuration #1 chosen from 1 choice [ 6.745335] hub 1-0:1.0: USB hub found [ 6.745368] hub 1-0:1.0: 2 ports detected [ 6.848396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.848411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.848420] usb usb1: Product: UHCI Host Controller [ 6.848427] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 6.848435] usb usb1: SerialNumber: 0000:00:1f.2 [ 6.848667] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 6.937448] e100: eth0: e100_probe: addr 0xf4120000, irq 9, MAC addr 00:30:05:05:5e:c0 [ 6.946024] No dock devices found. [ 6.986850] SCSI subsystem initialized [ 7.068652] libata version 3.00 loaded. [ 7.276334] hda: max request size: 128KiB [ 7.281744] hda: 20010816 sectors (10245 MB) w/512KiB Cache, CHS=19852/16/63 [ 7.281763] hda: cache flushes not supported [ 7.281903] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > [ 7.365642] hdc: ATAPI 32X DVD-ROM drive, 198kB Cache [ 7.365662] Uniform CD-ROM driver Revision: 3.20 [ 8.381023] PM: Starting manual resume from disk [ 8.512242] kjournald starting. Commit interval 5 seconds [ 8.512280] EXT3-fs: mounted filesystem with ordered data mode. [ 11.538090] udevd version 125 started [ 15.036484] input: PC Speaker as /class/input/input1 [ 15.726945] Linux agpgart interface v0.103 [ 15.824154] agpgart: Detected an Intel i810 Chipset. [ 15.835989] agpgart: AGP aperture is 64M @ 0xf8000000 [ 15.859185] Intel 82802 RNG detected [ 16.094257] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.101767] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.123983] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 16.123997] PCI: setting IRQ 5 as level-triggered [ 16.124089] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 17.493641] input: PS/2 Logitech Mouse as /class/input/input2 [ 17.743470] input: Power Button (FF) as /class/input/input3 [ 17.766211] ACPI: Power Button (FF) [PWRF] [ 17.766443] input: Power Button (CM) as /class/input/input4 [ 17.793875] ACPI: Power Button (CM) [PWRB] [ 18.970504] parport_pc 00:0a: reported by Plug and Play ACPI [ 18.970577] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.066737] parport_pc 00:0b: unable to assign resources [ 19.066813] parport_pc: probe of 00:0b failed with error -16 [ 19.243477] ns558 00:0e: activated [ 19.263539] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 890kHz [ 19.411206] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 19.411260] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 20.080102] intel8x0_measure_ac97_clock: measured 54661 usecs [ 20.080117] intel8x0: clocking to 48000 [ 20.743840] mpu401 00:0f: activated [ 23.588633] Adding 578300k swap on /dev/hda7. Priority:-1 extents:1 across:578300k [ 24.158655] EXT3 FS on hda1, internal journal [ 24.693148] loop: module loaded [ 26.360577] kjournald starting. Commit interval 5 seconds [ 26.364229] EXT3 FS on hda9, internal journal [ 26.364244] EXT3-fs: mounted filesystem with ordered data mode. [ 26.396021] kjournald starting. Commit interval 5 seconds [ 26.396021] EXT3 FS on hda8, internal journal [ 26.396021] EXT3-fs: mounted filesystem with ordered data mode. [ 26.448950] kjournald starting. Commit interval 5 seconds [ 26.452245] EXT3 FS on hda5, internal journal [ 26.452260] EXT3-fs: mounted filesystem with ordered data mode. [ 26.512977] kjournald starting. Commit interval 5 seconds [ 26.516248] EXT3 FS on hda6, internal journal [ 26.516262] EXT3-fs: mounted filesystem with ordered data mode. [ 29.604291] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 30.935442] NET: Registered protocol family 10 [ 30.937014] lo: Disabled Privacy Extensions [ 41.592030] eth0: no IPv6 routers present [ 60.240327] lp0: using parport0 (interrupt-driven). [ 60.299998] ppdev: user-space parallel port driver [ 63.251388] RPC: Registered udp transport module. [ 63.251401] RPC: Registered tcp transport module. [ 63.433465] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 63.574670] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 63.600016] NFSD: starting 90-second grace period [ 68.965893] Bluetooth: Core ver 2.11 [ 68.974354] NET: Registered protocol family 31 [ 68.974366] Bluetooth: HCI device and connection manager initialized [ 68.974377] Bluetooth: HCI socket layer initialized [ 69.137281] Bluetooth: L2CAP ver 2.9 [ 69.137292] Bluetooth: L2CAP socket layer initialized [ 69.399521] Bluetooth: RFCOMM socket layer initialized [ 69.399572] Bluetooth: RFCOMM TTY layer initialized [ 69.399580] Bluetooth: RFCOMM ver 1.8 [ 73.656654] NET: Registered protocol family 5 [ 76.326620] [drm] Initialized drm 1.1.0 20060810 [ 76.344889] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 76.344904] PCI: setting IRQ 11 as level-triggered [ 76.344913] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 76.344932] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 76.345012] mtrr: no more MTRRs available [ 76.345144] [drm] Initialized i810 1.4.0 20030605 on minor 0 [ 76.346185] mtrr: base(0xf8000000) is not aligned on a size(0x258000) boundary [ 77.072143] [drm] Using v1.4 init. [ 77.078121] mtrr: no more MTRRs available [ 80.240031] [drm:drm_release] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 80.240042] driver to use reclaim_buffers_idlelocked() instead. [ 80.240047] I will go on reclaiming the buffers anyway.
00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Siemens Nixdorf AG Device 004a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> Kernel modules: i2c-i810 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: f4100000-f41fffff Prefetchable memory behind bridge: 20000000-200fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801AA IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 1c00 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801AA USB Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at 1400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02) Subsystem: Intel Corporation 82801AA SMBus Controller Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 1800 [size=16] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02) Subsystem: Siemens Nixdorf AG Device 0049 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 1000 [size=256] Region 1: I/O ports at 2000 [size=64] Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 01:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09) Subsystem: Siemens Nixdorf AG Device 004b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at f4120000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3400 [size=64] Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at 20000000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 Kernel modules: e100, eepro100
Attachment:
signature.asc
Description: OpenPGP digital signature