Bug#534176: installation-report: Keyboard stops working when login prompt reached
Package: installation-reports
Version: 2.38
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: Lenny Debian 5.0.1 netinst
Date: 2009-06-21 21.00 EET
Machine: Fujitsu ErgoPro X x364
Partitions: swap and footfilesys
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [O ]
Install boot loader: [O ]
Overall install: [O ]
Comments/Problems:
Installation worked, after disabling ACPI and two serial ports in BIOS.
Before that Ethernet seemed to send but not receive
(DHCPDISCOVER and DHCPOFFER visible on DHCP-server, client claimed not
to get configuration).
What does not work is keyboard when at login prompt of the installed
system. Keyboard worked in Installer, and does work in GRUB and if
I boot in single user mode (writing this as root because in single user
mode). I noticed that keyboard also stopped working when I
got to rescue mode in Installer. Keyboard worked before that, I got
to rescue mode just fine via the menu choices, but once there no keypress
seemed to register.
I marked this bug serious because on this particular hardware Lenny can not
be used since naive user can not log in or do anything else either.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20090123lenny1"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux palomuuri 2.6.26-2-486 #1 Thu Mar 26 00:13:41 UTC 2009 i686 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 440LX/EX - 82443LX/EX Host bridge [8086:7180] (rev 03)
lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge [8086:7181] (rev 03)
lspci -knn: 00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 01)
lspci -knn: 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
lspci -knn: Kernel driver in use: PIIX_IDE
lspci -knn: Kernel modules: piix
lspci -knn: 00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 01)
lspci -knn: 00:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 02)
lspci -knn: Kernel driver in use: e100
lspci -knn: Kernel modules: e100, eepro100
lspci -knn: 00:10.0 Ethernet controller [0200]: D-Link System Inc RTL8139 Ethernet [1186:1300] (rev 10)
lspci -knn: Kernel driver in use: 8139too
lspci -knn: Kernel modules: 8139too
lspci -knn: 00:12.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] [1002:4755] (rev 9a)
lsmod: Module Size Used by
lsmod: ufs 63876 0
lsmod: qnx4 7684 0
lsmod: ntfs 180288 0
lsmod: dm_mod 45384 0
lsmod: md_mod 65940 0
lsmod: xfs 446708 0
lsmod: reiserfs 186880 0
lsmod: jfs 148060 0
lsmod: ext3 103688 1
lsmod: jbd 35092 1 ext3
lsmod: vfat 8960 0
lsmod: fat 40092 1 vfat
lsmod: ext2 52744 0
lsmod: mbcache 6656 2 ext3,ext2
lsmod: 8139too 20096 0
lsmod: e100 29196 0
lsmod: mii 4864 2 8139too,e100
lsmod: nls_utf8 1664 0
lsmod: isofs 27684 0
lsmod: nls_base 6528 6 ntfs,jfs,vfat,fat,nls_utf8,isofs
lsmod: zlib_inflate 13952 1 isofs
lsmod: rsrc_nonstatic 9344 0
lsmod: pcmcia_core 31760 1 rsrc_nonstatic
lsmod: ide_generic 2432 0 [permanent]
lsmod: usb_storage 76352 0
lsmod: scsi_mod 129420 1 usb_storage
lsmod: vga16fb 11276 2
lsmod: vgastate 7552 1 vga16fb
lsmod: thermal_sys 10656 0
lsmod: ide_cd_mod 27524 0
lsmod: cdrom 30112 1 ide_cd_mod
lsmod: ide_disk 10368 3
lsmod: parport_pc 22308 0
lsmod: uhci_hcd 18320 0
lsmod: parport 30152 1 parport_pc
lsmod: piix 6404 0 [permanent]
lsmod: floppy 47620 0
lsmod: usbcore 117232 3 usb_storage,uhci_hcd
lsmod: ide_core 94760 4 ide_generic,ide_cd_mod,ide_disk,piix
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 95808 24 95784 0% /dev
df: /dev/hda2 3668436 583704 2898380 17% /target
df: /dev/hda2 3668436 583704 2898380 17% /dev/.static/dev
df: tmpfs 95808 24 95784 0% /target/dev
free: total used free shared buffers
free: Mem: 191616 148652 42964 0 1528
free: Swap: 489940 0 489940
free: Total: 681556 148652 532904
/proc/cmdline: vga=normal initrd=/install.386/initrd.gz -- quiet BOOT_IMAGE=/install.386/vmlinuz
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 3
/proc/cpuinfo: model name : Pentium II (Klamath)
/proc/cpuinfo: stepping : 4
/proc/cpuinfo: cpu MHz : 267.257
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx
/proc/cpuinfo: bogomips : 535.59
/proc/cpuinfo: clflush size : 32
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:07.1
/proc/ioports: 0170-0177 : PIIX4
/proc/ioports: 01f0-01f7 : 0000:00:07.1
/proc/ioports: 01f0-01f7 : PIIX4
/proc/ioports: 020b-020b : pnp 00:30
/proc/ioports: 0213-0213 : ISAPnP
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : 0000:00:07.1
/proc/ioports: 0376-0376 : PIIX4
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : 0000:00:07.1
/proc/ioports: 03f6-03f6 : PIIX4
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 04d0-04d1 : pnp 00:30
/proc/ioports: 0a79-0a79 : pnp 00:30
/proc/ioports: 0a79-0a79 : isapnp write
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 7000-703f : 0000:00:07.3
/proc/ioports: 7040-704f : 0000:00:07.3
/proc/ioports: 8000-800f : 0000:00:07.1
/proc/ioports: 8000-800f : PIIX4
/proc/ioports: 8020-803f : 0000:00:07.2
/proc/ioports: 8020-803f : uhci_hcd
/proc/ioports: 8040-805f : 0000:00:08.0
/proc/ioports: 8040-805f : e100
/proc/ioports: 8400-84ff : 0000:00:10.0
/proc/ioports: 8400-84ff : 8139too
/proc/ioports: 8800-88ff : 0000:00:12.0
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000c8000-000d05ff : Adapter ROM
/proc/iomem: 000d0600-000d3fff : pnp 00:31
/proc/iomem: 000ef800-000effff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-0bffffff : System RAM
/proc/iomem: 00100000-002a7c02 : Kernel code
/proc/iomem: 002a7c03-00361fff : Kernel data
/proc/iomem: 003b4000-0040dbd7 : Kernel bss
/proc/iomem: 10000000-1001ffff : 0000:00:12.0
/proc/iomem: 40000000-4fffffff : 0000:00:00.0
/proc/iomem: 50000000-50000fff : 0000:00:08.0
/proc/iomem: 50000000-50000fff : e100
/proc/iomem: 80000000-800fffff : 0000:00:08.0
/proc/iomem: 81000000-810fffff : 0000:00:08.0
/proc/iomem: 81000000-810fffff : e100
/proc/iomem: 81100000-811000ff : 0000:00:10.0
/proc/iomem: 81100000-811000ff : 8139too
/proc/iomem: 81101000-81101fff : 0000:00:12.0
/proc/iomem: 82000000-82ffffff : 0000:00:12.0
/proc/iomem: fffc0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 534245 XT-PIC-XT timer
/proc/interrupts: 1: 981 XT-PIC-XT i8042
/proc/interrupts: 2: 0 XT-PIC-XT cascade
/proc/interrupts: 6: 8 XT-PIC-XT floppy
/proc/interrupts: 7: 0 XT-PIC-XT parport0
/proc/interrupts: 8: 0 XT-PIC-XT rtc0
/proc/interrupts: 10: 65970 XT-PIC-XT eth0
/proc/interrupts: 11: 0 XT-PIC-XT uhci_hcd:usb1
/proc/interrupts: 14: 182035 XT-PIC-XT ide0
/proc/interrupts: 15: 3487 XT-PIC-XT ide1
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 0 Local timer interrupts
/proc/interrupts: TRM: 0 Thermal event interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 191616 kB
/proc/meminfo: MemFree: 42936 kB
/proc/meminfo: Buffers: 1528 kB
/proc/meminfo: Cached: 128644 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 67956 kB
/proc/meminfo: Inactive: 66148 kB
/proc/meminfo: SwapTotal: 489940 kB
/proc/meminfo: SwapFree: 489940 kB
/proc/meminfo: Dirty: 596 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 3960 kB
/proc/meminfo: Mapped: 2092 kB
/proc/meminfo: Slab: 9908 kB
/proc/meminfo: SReclaimable: 7136 kB
/proc/meminfo: SUnreclaim: 2772 kB
/proc/meminfo: PageTables: 280 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 585748 kB
/proc/meminfo: Committed_AS: 7132 kB
/proc/meminfo: VmallocTotal: 843460 kB
/proc/meminfo: VmallocUsed: 3688 kB
/proc/meminfo: VmallocChunk: 839412 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 4096 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.0.0-6 Linux PCI Utilities
ii reportbug 3.48 reports bugs in the Debian distrib
installation-report suggests no packages.
-- no debconf information
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 15:39:35 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 192MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 49152) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 49152
[ 0.000000] HighMem 49152 -> 49152
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 49152
[ 0.000000] On node 0 totalpages: 49152
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 352 pages used for memmap
[ 0.000000] Normal zone: 44704 pages, LIFO batch:7
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321]
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0c000000:f3fc0000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
[ 0.000000] Kernel command line: root=/dev/hda2 ro single
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0118c000)
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 267.265 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Memory: 185028k/196608k available (1769k kernel code, 11080k reserved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba5eb - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba5eb (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.085044] Calibrating delay using timer specific routine.. 536.20 BogoMIPS (lpj=1072413)
[ 0.085492] Security Framework initialized
[ 0.085610] SELinux: Disabled at boot.
[ 0.085710] Capability LSM initialized
[ 0.085918] Mount-cache hash table entries: 512
[ 0.087000] Initializing cgroup subsys ns
[ 0.087106] Initializing cgroup subsys cpuacct
[ 0.087202] Initializing cgroup subsys devices
[ 0.087422] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.087567] CPU: L2 cache: 512K
[ 0.087662] Intel machine check architecture supported.
[ 0.087768] Intel machine check reporting enabled on CPU#0.
[ 0.087933] Checking 'hlt' instruction... OK.
[ 0.101224] SMP alternatives: switching to UP code
[ 0.131503] Freeing SMP alternatives: 16k freed
[ 0.131607] ACPI: Core revision 20080321
[ 0.131951] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
[ 0.132008] ACPI: Unable to load the System Description Tables
[ 0.132008] weird, boot CPU (#0) not listedby the BIOS.
[ 0.132008] SMP motherboard not detected.
[ 0.132008] Local APIC not detected. Using dummy APIC emulation.
[ 0.132008] SMP disabled
[ 0.132429] Brought up 1 CPUs
[ 0.132523] Total of 1 processors activated (536.20 BogoMIPS).
[ 0.132657] CPU0 attaching sched-domain:
[ 0.132680] domain 0: span 0
[ 0.132697] groups: 0
[ 0.134339] net_namespace: 660 bytes
[ 0.134446] Booting paravirtualized kernel on bare hardware
[ 0.136606] NET: Registered protocol family 16
[ 0.143311] PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1
[ 0.143421] PCI: Using configuration type 1 for base access
[ 0.143523] Setting up standard PCI resources
[ 0.177664] ACPI: Interpreter disabled.
[ 0.177769] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.178177] pnp: PnP ACPI: disabled
[ 0.178271] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.179297] PnPBIOS: Found PnP BIOS installation structure at 0xc00fef60
[ 0.179414] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbffe, dseg 0xef800
[ 0.240151] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[ 0.243097] PCI: Probing PCI hardware
[ 0.243197] PCI: Probing PCI hardware (bus 00)
[ 0.244195] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.244211] * this clock source is slow. Consider trying other clock sources
[ 0.244514] pci 0000:00:07.3: quirk: region 7000-703f claimed by PIIX4 ACPI
[ 0.244626] pci 0000:00:07.3: quirk: region 7040-704f claimed by PIIX4 SMB
[ 0.250315] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 0.251687] system 00:30: ioport range 0x20b-0x20b has been reserved
[ 0.251802] system 00:30: ioport range 0x4d0-0x4d1 has been reserved
[ 0.251909] system 00:30: ioport range 0xa79-0xa79 has been reserved
[ 0.252059] system 00:30: ioport range 0x7000-0x704f could not be reserved
[ 0.252216] system 00:31: iomem range 0x0-0x9ffff could not be reserved
[ 0.252330] system 00:31: iomem range 0xd0600-0xd3fff has been reserved
[ 0.252437] system 00:31: iomem range 0xe0000-0xeffff could not be reserved
[ 0.252545] system 00:31: iomem range 0xf0000-0xfffff could not be reserved
[ 0.252652] system 00:31: iomem range 0x100000-0xbffffff could not be reserved
[ 0.252815] system 00:32: iomem range 0xfffc0000-0xffffffff could not be reserved
[ 0.257051] PCI: Bridge: 0000:00:01.0
[ 0.257146] IO window: disabled.
[ 0.257237] MEM window: disabled.
[ 0.257325] PREFETCH window: disabled.
[ 0.257601] NET: Registered protocol family 2
[ 0.258520] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.260444] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.260976] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.261501] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.261607] TCP reno registered
[ 0.262274] NET: Registered protocol family 1
[ 0.263270] checking if image is initramfs... it is
[ 4.756347] Freeing initrd memory: 6033k freed
[ 4.760947] audit: initializing netlink socket (disabled)
[ 4.761132] type=2000 audit(1245660641.760:1): initialized
[ 4.762015] Total HugeTLB memory allocated, 0
[ 4.762662] VFS: Disk quotas dquot_6.5.1
[ 4.762992] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.763388] msgmni has been set to 373
[ 4.764466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.764602] io scheduler noop registered
[ 4.764691] io scheduler anticipatory registered
[ 4.764781] io scheduler deadline registered
[ 4.764955] io scheduler cfq registered (default)
[ 4.765109] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 4.765332] pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling
[ 4.765491] pci 0000:00:12.0: Boot video device
[ 4.767981] isapnp: Scanning for PnP cards...
[ 4.877101] pnp 01:01.00: SB audio device quirk - increased port range
[ 4.877671] 01:01: card 'Creative ViBRA16X PnP'
[ 4.877775] isapnp: 1 Plug & Play card detected total
[ 4.903857] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 4.918846] serial 00:09: activated
[ 4.919516] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.931190] serial 00:0a: activated
[ 4.931835] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.945942] brd: module loaded
[ 4.946675] i8042 aux: probe of 00:07 failed with error -22
[ 4.947148] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 4.947257] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.948494] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.949722] mice: PS/2 mouse device common for all mice
[ 4.950761] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 4.950913] rtc0: alarms up to one day
[ 4.951344] cpuidle: using governor ladder
[ 4.951443] cpuidle: using governor menu
[ 4.951554] No iBFT detected.
[ 4.955713] TCP cubic registered
[ 4.955814] NET: Registered protocol family 17
[ 4.955937] Using IPI No-Shortcut mode
[ 4.957203] registered taskstats version 1
[ 4.957963] rtc_cmos 00:08: setting system clock to 2009-06-22 08:50:42 UTC (1245660642)
[ 4.959706] Freeing unused kernel memory: 244k freed
[ 4.988692] input: AT Translated Set 2 keyboard as /class/input/input0
[ 5.766532] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 8.528915] Uniform Multi-Platform E-IDE driver
[ 8.529043] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 8.748496] 8139too Fast Ethernet driver 0.9.28
[ 8.748788] PCI: setting IRQ 10 as level-triggered
[ 8.748812] PCI: Found IRQ 10 for device 0000:00:10.0
[ 8.748964] PCI: Sharing IRQ 10 with 0000:00:08.0
[ 8.751364] eth0: RealTek RTL8139 at 0x8400, 00:50:ba:bd:01:bb, IRQ 10
[ 8.751476] eth0: Identified 8139 chip type 'RTL-8139C'
[ 8.767817] Floppy drive(s): fd0 is 1.44M
[ 8.787740] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 8.787851] e100: Copyright(c) 1999-2006 Intel Corporation
[ 8.788096] PCI: Found IRQ 10 for device 0000:00:08.0
[ 8.788644] PCI: Sharing IRQ 10 with 0000:00:10.0
[ 8.814957] e100: eth1: e100_probe: addr 0x50000000, irq 10, MAC addr 00:00:0e:9d:84:a4
[ 8.816903] FDC 0 is a post-1991 82077
[ 8.847346] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
[ 8.847543] PIIX4: not 100% native mode: will probe irqs later
[ 8.847671] ide0: BM-DMA at 0x8000-0x8007
[ 8.847787] ide1: BM-DMA at 0x8008-0x800f
[ 8.847893] Probing IDE interface ide0...
[ 8.862291] usbcore: registered new interface driver usbfs
[ 8.862599] usbcore: registered new interface driver hub
[ 8.863006] usbcore: registered new device driver usb
[ 8.891192] USB Universal Host Controller Interface driver v3.0
[ 8.908827] udev: renamed network interface eth1 to eth0
[ 8.946694] udev: renamed network interface eth0_rename to eth1
[ 9.136459] hda: SAMSUNG VA34323A, ATA DISK drive
[ 9.472608] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 9.472758] hda: UDMA/33 mode selected
[ 9.472938] Probing IDE interface ide1...
[ 10.208466] hdc: CD-524EA, ATAPI CD/DVD-ROM drive
[ 10.544544] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO3
[ 10.544731] hdc: MWDMA2 mode selected
[ 10.545056] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 10.545332] ide1 at 0x170-0x177,0x376 on irq 15
[ 10.546208] PCI: setting IRQ 11 as level-triggered
[ 10.546233] PCI: Found IRQ 11 for device 0000:00:07.2
[ 10.546426] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 10.546983] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 10.547174] uhci_hcd 0000:00:07.2: irq 11, io base 0x00008020
[ 10.547944] usb usb1: configuration #1 chosen from 1 choice
[ 10.548350] hub 1-0:1.0: USB hub found
[ 10.548501] hub 1-0:1.0: 2 ports detected
[ 10.653155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.653270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.653385] usb usb1: Product: UHCI Host Controller
[ 10.653476] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 10.653570] usb usb1: SerialNumber: 0000:00:07.2
[ 10.814024] SCSI subsystem initialized
[ 10.958682] libata version 3.00 loaded.
[ 11.375363] hda: max request size: 128KiB
[ 11.394411] hda: 8446410 sectors (4324 MB) w/478KiB Cache, CHS=8938/15/63
[ 11.394620] hda: cache flushes not supported
[ 11.394951] hda: hda1 hda2
[ 11.444286] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[ 11.444635] Uniform CD-ROM driver Revision: 3.20
[ 12.023412] PM: Starting manual resume from disk
[ 12.204747] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 12.204876] EXT3-fs: write access will be enabled during recovery.
[ 12.766299] kjournald starting. Commit interval 5 seconds
[ 12.766480] EXT3-fs: recovery complete.
[ 12.783058] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.859502] udevd version 125 started
[ 22.621560] input: PC Speaker as /class/input/input1
[ 24.797349] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.005575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.209481] Linux agpgart interface v0.103
[ 25.345372] agpgart: Detected an Intel 440LX Chipset.
[ 25.377988] agpgart: AGP aperture is 256M @ 0x40000000
[ 26.075535] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 26.238565] parport_pc 00:0e: reported by Plug and Play BIOS
[ 26.238764] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 26.265367] Error: Driver 'pcspkr' is already registered, aborting...
[ 27.024087] sb: Init: Starting Probe...
[ 27.024393] sb: Init: Done
[ 30.065007] Adding 489940k swap on /dev/hda1. Priority:-1 extents:1 across:489940k
[ 30.614328] EXT3 FS on hda2, internal journal
[ 31.616350] loop: module loaded
[ 34.101222] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 35.135339] NET: Registered protocol family 10
[ 35.139425] lo: Disabled Privacy Extensions
[ 45.289300] eth0: no IPv6 routers present
Reply to: