Your message dated Fri, 24 Oct 2008 06:54:34 +0200 with message-id <20081024045434.GR24701@mykerinos.kheops.frmug.org> and subject line Re: Bug#503256: Installation Report - Xserver failed to detect correct monitor settings for Apple iBook G3 has caused the Debian Bug report #503256, regarding Installation Report - Xserver failed to detect correct monitor settings for Apple iBook G3 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 503256: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503256 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Installation Report - Xserver failed to detect correct monitor settings for Apple iBook G3
- From: William <william@ecn.cz>
- Date: Fri, 24 Oct 2008 01:32:55 +0100
- Message-id: <[🔎] 490117B7.9080500@ecn.cz>
Package: installation-reports Boot method: Net Install CD Image version: http://victoria.acc.umu.se/debian-cd/4.0_r4a/powerpc/iso-cd/debian-40r4a-powerpc-netinst.iso Date: 23 October 2008 23:00 Machine: Apple iBook Processor: PowerPC 750cx (G3) 600 MHz Memory: 640 MBPartitions:Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda12 ext3 6728592 2615248 3771548 41% / tmpfs tmpfs 321936 0 321936 0% /lib/init/rw udev tmpfs 10240 128 10112 2% /dev tmpfs tmpfs 321936 0 321936 0% /dev/shm /dev/hda14 ext3 75873644 185016 71834384 1% /home Output of lspci -nn: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth/Pangea AGP [106b:0027] 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] (rev 02) 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth/Pangea PCI [106b:0028] 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Pangea Mac I/O [106b:0025] 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Pangea USB [106b:0026] 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Pangea USB [106b:0026] 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth/Pangea Internal PCI [106b:0029] 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth/Pangea FireWire [106b:0030] 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM) [106b:0024] Output of lspci -vnn: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth/Pangea AGP [106b:0027] Flags: bus master, 66MHz, medium devsel, latency 16 Capabilities: <access denied> 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] (rev 02) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] Flags: bus master, stepping, 66MHz, medium devsel, latency 255, IRQ 48 Memory at 94000000 (32-bit, prefetchable) [size=64M] I/O ports at f0000400 [size=256] Memory at 90000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at f1000000 [disabled] [size=128K] Capabilities: <access denied> 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth/Pangea PCI [106b:0028] Flags: bus master, 66MHz, medium devsel, latency 16 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Pangea Mac I/O [106b:0025] Flags: bus master, medium devsel, latency 16 Memory at 80000000 (32-bit, non-prefetchable) [size=512K] 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Pangea USB [106b:0026] (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 27 Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Pangea USB [106b:0026] (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 28 Memory at 80080000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth/Pangea Internal PCI [106b:0029] Flags: bus master, 66MHz, medium devsel, latency 16 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth/Pangea FireWire [106b:0030] (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. UniNorth/Pangea FireWire [106b:0030] Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 40 Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM) [106b:0024] Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41 Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [E] Comments/Problems: Installation was fine other than setting up Xorg. When I first booted into the system the login window didn't display correctly. The leftmost 15% of the screen was fine but the rest was black, with a horizontal bar appearing across the middle of the screen. I solved this by running dpkg-reconfigure xserver-xorg and accepting all of the default answers (as I didn't understand most of the questions). I then restarted X and the display was fine.
--- End Message ---
--- Begin Message ---
- To: William <william@ecn.cz>, 503256-done@bugs.debian.org
- Subject: Re: Bug#503256: Installation Report - Xserver failed to detect correct monitor settings for Apple iBook G3
- From: Christian Perrier <bubulle@debian.org>
- Date: Fri, 24 Oct 2008 06:54:34 +0200
- Message-id: <20081024045434.GR24701@mykerinos.kheops.frmug.org>
- In-reply-to: <[🔎] 490117B7.9080500@ecn.cz>
- References: <[🔎] 490117B7.9080500@ecn.cz>
> Installation was fine other than setting up Xorg. When I first booted into the system the login window didn't display correctly. The leftmost 15% of the screen was fine but the rest was black, with a horizontal bar appearing across the middle of the screen. > > I solved this by running dpkg-reconfigure xserver-xorg and accepting all of the default answers (as I didn't understand most of the questions). I then restarted X and the display was fine. Given that your installation was a complete success, I do as usual with reports for successful installations: I close the bug..:-) This does not of course mean you weren't right to report. Knowing the installations are correct is important for the d-i team. Many thanks for your time testing the Debian Installer and reporting your results. Have fun with your new Debian system! PS: the xorg issue pertains to the xorg package more than D-I, which explains why we consider this is a 100% success...Attachment: signature.asc
Description: Digital signature
--- End Message ---