[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#490122: marked as done (Lenny dmraid=true Fails on HP ProLiant ML110 G5)

Your message dated Thu, 17 Jul 2008 09:53:04 +0200
with message-id <200807170953.04575.elendil@planet.nl>
and subject line Re: Bug#490122: Lenny dmraid=true Fails on HP ProLiant ML110 G5
has caused the Debian Bug report #490122,
regarding Lenny dmraid=true Fails on HP ProLiant ML110 G5
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

490122: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490122
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: <install dmraid=true>
Image version:
Date: <7/9/2008 6:00PM>

Machine: <HP ProLiant ML110 G5>
Processor: Core 2 Duo E4400 / 2 GHz
Memory:	2G
Partitions: <None - won't detect SATA Raid>

Output of lspci -knn (or lspci -nn):

RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev02)

Many other lines in lscpi output that show Intel 82801I (ICH9 Family)
(no easy way to capture complete output)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [E]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]


Step Detect disks fails


Installation Step failed.

<CentOS 5.1 and CentOS 5.2 both detect the SATA Raid volume set up in the
on-board bios as /dev/mapper/ddf1_raid1. However, I would much prefer to
install Debian.>

--- End Message ---
--- Begin Message ---
As we haven't yet received the requested additional information (see 
below), I'm closing this report. If you do provide the requested info in 
reply to this mail, we can reopen it again.


On Thursday 10 July 2008, Frans Pop wrote:
> On Thursday 10 July 2008, Denny Fox wrote:
> > Comments/Problems:
> > Step Detect disks fails
> Well, if you do you'll have to provide a bit more useful information
> than this...
> Please send us the syslog (gzipped!!) and hardware-summary for your
> install. You can get them by using the "Save debug logs option" in the
> main menu of the installer after the failure. Use the webserver in the
> installer or copy them /var/log/ somehow.
> You can also start by checking the syslog yourself for obvious
> problems.

--- End Message ---

Reply to: