Bug#490986: Lenny: failed installation.
Package: installation-reports
Boot method: I copied the contents of the network install iso file into a
directory (another partition), and then mounted it.
Image version: debian-LennyBeta2-i386-netinst.iso
Date: July 15, 2008
Machine: Omatek E-10 notebook
Processor: AMD LX800
Memory: 500Mb
Partitions: hda1 10 Gb (my target).
/dev/hda1 * 1 1216 9767488+ 83 Linux
/dev/hda2 1217 1338 979965 82 Linux swap/solaris
/dev/hda3 1339 7295 47849602+ 83 Linux
Output of lspci -nn and lspci -vnn:
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] Host Bridge [1022:2080] (rev 33)
00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
Geode LX Video [1022:2081]
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices
[AMD] Geode LX AES Security Block [1022:2082]
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
00:0e.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card
Cardbus Controller [104c:ac56]
00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] ISA [1022:2090] (rev 03)
00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536
[Geode companion] IDE [1022:209a] (rev 01)
00:0f.3 Multimedia audio controller [0401]: Advanced Micro Devices
[AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01)
00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
[Geode companion] OHC [1022:2094] (rev 02)
00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
[Geode companion] EHC [1022:2095] (rev 02)
-----------------------------
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] Host Bridge [1022:2080] (rev 33)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host
Bridge [1022:2080]
Flags: bus master, 66MHz, medium devsel, latency 248
I/O ports at ac1c [size=4]
I/O ports at 9e00 [size=8]
00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
Geode LX Video [1022:2081]
Subsystem: Advanced Micro Devices [AMD] Geode LX Video [1022:2081]
Flags: 66MHz, medium devsel, IRQ 11
Memory at 90000000 (32-bit, non-prefetchable) [size=32M]
Memory at 8fffc000 (32-bit, non-prefetchable) [size=16K]
Memory at 8fff8000 (32-bit, non-prefetchable) [size=16K]
Memory at 8fff4000 (32-bit, non-prefetchable) [size=16K]
Memory at 8fff0000 (32-bit, non-prefetchable) [size=16K]
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices
[AMD] Geode LX AES Security Block [1022:2082]
Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at efe00000 (32-bit, non-prefetchable) [size=16K]
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at df00 [size=256]
Memory at efd00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
00:0e.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card
Cardbus Controller [104c:ac56]
Subsystem: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
Flags: bus master, medium devsel, latency 168, IRQ 7
Memory at efc00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 94000000-97fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] ISA [1022:2090] (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
[1022:2090]
Flags: 66MHz, medium devsel
I/O ports at 6000 [size=8]
I/O ports at 6100 [size=256]
I/O ports at 6200 [size=64]
I/O ports at 1800 [size=32]
I/O ports at 9d00 [size=128]
I/O ports at 9c00 [size=64]
00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536
[Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
[1022:209a]
Flags: bus master, 66MHz, medium devsel, latency 248
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at eff0 [size=16]
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx
00:0f.3 Multimedia audio controller [0401]: Advanced Micro Devices
[AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion]
Audio [1022:2093]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 5
I/O ports at dc80 [size=128]
00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
[Geode companion] OHC [1022:2094] (rev 02) (prog-if 10)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
[1022:2094]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
Memory at eff00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
[Geode companion] EHC [1022:2095] (rev 02) (prog-if 20)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
[1022:2095]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
Memory at ef900000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
Base System Installation Checklist:
E = Error
I get: Failed to determine the codename for the release
Then, I followed the instruction of http://www.debianhelp.org/node/8799
replacing etch by lenny. I got a message of success (but there seems to
be no second step).
I am stuck because the installer refuses to configure the package manager.
Initial boot: [ok ]
Detect network card: [ok ]
Configure network: [ok ]
Detect CD: [no CD ]
Load installer modules: [ok ]
Detect hard drives: [ok ]
Partition hard drives: [ok ]
Install base system: [no ]
Clock/timezone setup: [ ]
User/password setup: [ok ]
Install tasks: [ ]
Install boot loader: [refuses ]
Overall install: [ ]
Comments/Problems:
--
Gregorio Malajovich, gregorio@ufrj.br
---------------------------------------------------
The big brother is watching YOU. He is legally entitled to do so by
Art.11, G0091e's Terms of Service.
Reply to: