[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#466906: marked as done ([s390] tape installation method broken due to missing modules)

Your message dated Sun, 13 Jul 2008 09:53:41 +0200
with message-id <200807130953.41868.elendil@planet.nl>
and subject line Bug#466906: [s390] tape installation method broken due to missing modules
has caused the Debian Bug report #466906,
regarding [s390] tape installation method broken due to missing modules
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
466906: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466906
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: <How did you boot the installer? TAPE
Image version:
http://ftp.nl.debian.org/debian/dists/etch/main/installer-s390/current/i
mages/

Date: 02/21/2008

Machine: HERCULES emulating a 2086-170
Processor: 1 CPU	
Memory: 824M
Partitions: 1

Output of lspci -nn and lspci -vnn:

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [ ]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [E]

Comments/Problems:

I will provide the Hercules log file. When I ipl the tape and am asked
to configure the network. I reply with a 1 and the error that no ctc
devices are found. This worked ok with the r02 version, but seems broken
with the r03.

12:56:28.131 00000D7C ipl 581
12:56:28.131 00000D7C HHCCP007I CPU0000 architecture mode set to ESA/390
12:56:28.428 00000D7C HHCCP014I CPU0000: Addressing exception CODE=0005
ILC=6
12:56:28.428 00000D7C PSW=00082000 800111EC INST=E50150000000 TPROT
0(5),0(0)              test_protection
12:56:28.428 00000D7C R:33800000: Translation exception 0005
12:56:28.428 00000D7C R:00000000:K:06=00080000 80000240 27000000
60000001  ....... ....-...
12:56:28.428 00000D7C GR00=00000000  GR01=00020000  GR02=00000000
GR03=003092DC
12:56:28.428 00000D7C GR04=00000000  GR05=33800000  GR06=00000000
GR07=00000000
12:56:28.428 00000D7C GR08=00000000  GR09=33800000  GR10=00000010
GR11=00000000
12:56:28.428 00000D7C GR12=00010400  GR13=80011002  GR14=8000030C
GR15=00000000
12:56:29.116 00000D7C HHCCP041I SYSCONS interface active
12:56:29.116 00000D7C HHCCP041I SYSCONS interface active
12:56:29.226 00000D7C Linux version 2.6.18-6-s390-tape (Debian
2.6.18.dfsg.1-18) (dannf@debian.org) (g
12:56:29.226 00000D7C cc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Sat Jan 26 08:5
12:56:29.226 00000D7C 7:20 UTC 2008
12:56:29.226 00000D7C We are running native (31 bit mode)
12:56:29.226 00000D7C This machine has an IEEE fpu
12:56:29.226 00000D7C Detected 1 CPU's
12:56:29.226 00000D7C Boot cpu address  0
12:56:29.226 00000D7C Built 1 zonelists.  Total pages: 210944
12:56:29.226 00000D7C Kernel command line: dasd=100-101 ro
chandev=ctc0,0x0002,0x0003,0,0,0
12:56:29.226 00000D7C hostname=s390 ip=172.20.70.250
netmask=255.255.255.0
12:56:29.226 00000D7C gateway=172.20.70.248 peer=172.20.70.248
dns=172.16.6.13
12:56:29.226 00000D7C netinterface=ctc0 netmodule=ctc
12:56:29.226 00000D7C ro debian-installer/locale=C
12:56:29.226 00000D7C 
12:56:29.226 00000D7C 
12:56:29.226 00000D7C PID hash table entries: 4096 (order: 12, 16384
bytes)
12:56:29.226 00000D7C Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
12:56:29.226 00000D7C Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
12:56:29.742 00000D7C Memory: 829440k/843776k available (2192k kernel
code, 0k reserved, 787k data, 10
12:56:29.742 00000D7C 0k init)
12:56:29.742 00000D7C Write protected kernel read-only data: 0x226000 -
0x299fff
12:56:29.946 00000D7C Security Framework v1.0.0 initialized
12:56:29.946 00000D7C SELinux:  Disabled at boot.
12:56:29.946 00000D7C Capability LSM initialized
12:56:29.946 00000D7C Mount-cache hash table entries: 512
12:56:29.946 00000D7C cpu 0 phys_idx=0 vers=00 ident=000611 machine=2086
unused=0000
12:56:29.946 00000D7C Brought up 1 CPUs
12:56:29.946 00000D7C migration_cost=1000
12:56:29.946 00000D7C checking if image is initramfs...
12:56:36.266 00000D7C  it is
12:56:42.820 00000D7C Freeing initrd memory: 2452k freed
12:56:42.820 00000D7C NET: Registered protocol family 16
12:56:42.820 00000D7C debug: Initialization complete
12:56:42.820 00000D7C cio: Was not able to determine available CHSCs.
12:56:42.820 00000D7C NET: Registered protocol family 2
12:56:42.992 00000D7C IP route cache hash table entries: 32768 (order:
5, 131072 bytes)
12:56:42.992 00000D7C TCP established hash table entries: 131072 (order:
8, 1572864 bytes)
12:56:42.992 00000D7C TCP bind hash table entries: 65536 (order: 7,
524288 bytes)
12:56:42.992 00000D7C TCP: Hash tables configured (established 131072
bind 65536)
12:56:42.992 00000D7C TCP reno registered
12:56:42.992 00000D7C hypfs: diag 204 not working.<3>hypfs:
Initialization failed with rc = -61.
12:56:43.071 00000D7C HHCCP041I SYSCONS interface active
12:56:43.071 00000D7C HHCCP041I SYSCONS interface active
12:56:43.102 00000D7C audit: initializing netlink socket (disabled)
12:56:43.102 00000D7C audit(1203620202.974:1): initialized
12:56:43.102 00000D7C VFS: Disk quotas dquot_6.5.1
12:56:43.102 00000D7C Dquot-cache hash table entries: 1024 (order 0,
4096 bytes)
12:56:43.102 00000D7C Initializing Cryptographic API
12:56:43.102 00000D7C io scheduler noop registered
12:56:43.102 00000D7C io scheduler anticipatory registered
12:56:43.102 00000D7C io scheduler deadline registered
12:56:43.102 00000D7C io scheduler cfq registered (default)
12:56:43.102 00000D7C RAMDISK driver initialized: 16 RAM disks of 24576K
size 1024 blocksize
12:56:43.102 00000D7C Channel measurement facility using basic format
(autodetected)
12:56:43.102 00000D7C qdio: loading QDIO base support version 2
12:56:43.102 00000D7C qdio : Not all CHSCs supported. Continuing.
12:56:43.102 00000D7C TCP bic registered
12:56:43.102 00000D7C NET: Registered protocol family 1
12:56:43.102 00000D7C NET: Registered protocol family 10
12:56:43.102 00000D7C lo: Disabled Privacy Extensions
12:56:43.102 00000D7C IPv6 over IPv4 tunneling driver
12:56:43.102 00000D7C NET: Registered protocol family 17
12:56:43.102 00000D7C Freeing unused kernel memory: 100k freed
12:56:46.653 00000D7C Starting system log daemon: syslogd,
12:56:46.778 00000D7C klogd.
12:56:50.658 00000D7C 
2:56:50.658 00000D7C 
12:56:50.658 00000D7C  1;24r 4l ?25l ?1c ?25h ?0c 0;10m 37m 40m 1;24r H
J 24;1H 0;10m 39;49m K
12:56:53.005 00000D7C Configure the network device
12:56:53.005 00000D7C ----------------------------
12:56:53.005 00000D7C 
12:56:53.005 00000D7C Please choose the type of your primary network
interface that you will need for
12:56:53.005 00000D7C installing the Debian system (via NFS or HTTP).
Only the listed devices are
12:56:53.005 00000D7C supported.
12:56:53.005 00000D7C Network device type:
12:56:53.005 00000D7C   1. ctc: Channel to Channel (CTC) or ESCON
connection
12:56:53.005 00000D7C   2. qeth: OSA-Express in QDIO mode / HiperSockets
12:56:53.005 00000D7C   3. iucv: Inter-User Communication Vehicle -
available for VM guests only
12:56:53.005 00000D7C Prompt: '?' for help>
12:56:58.370 00000D7C .1
12:56:58.480 00000D7C 1
12:56:58.480 00000D7C 
12:56:58.480 00000D7C    ERROR: No CTC or ESCON connections
12:56:58.480 00000D7C 
12:56:58.480 00000D7C Please make sure that you have set them up
correctly.
12:56:58.480 00000D7C  Press enter to continue!


Mike S. Ward Jr.
A.V.P. Information Technology
Security Service Federal Credit Union
(210)476-4600
mward@ssfcu.org
==========================
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity
to whom they are addressed.If you have received this email in error please notify the system manager. This message
contains confidential information and is intended only for the individual named. If you are not the named addressee you
should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received
this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that
disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

--- End Message ---
--- Begin Message --- 
Version: 20080522

Fixed in D-I Lenny beta2 but not yet for Etch.

--- End Message ---
Reply to: