Bug#391288: d-i fails to install on an optiplex 745 (no ICH8 driver)
Package: installation-reports
Boot method: netboot, usb drive
Image version: daily installer build from October 5th, 2006
Date: October 5th, 2006
Machine: Dell OptiPlex 745
Processor: Pentium D 3.? GHz
Memory: 1G
Partitions: None
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation Q963/Q965 Memory Controller Hub
(rev 02)
00:01.0 PCI bridge: Intel Corporation Q963/Q965 PCI Express Root Port
(rev 02)
00:02.0 VGA compatible controller: Intel Corporation Q963/Q965
Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation Q963/Q965 Integrated
Graphics Controller (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
#4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
#5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
#2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
#1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
#2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
#3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
#1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port
SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
(rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port
SATA IDE Controller (rev 02)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754
Gigabit Ethernet PCI Express (rev 02)
00:00.0 0600: 8086:2990 (rev 02)
00:01.0 0604: 8086:2991 (rev 02)
00:02.0 0300: 8086:2992 (rev 02)
00:02.1 0380: 8086:2993 (rev 02)
00:1a.0 0c03: 8086:2834 (rev 02)
00:1a.1 0c03: 8086:2835 (rev 02)
00:1a.7 0c03: 8086:283a (rev 02)
00:1b.0 0403: 8086:284b (rev 02)
00:1c.0 0604: 8086:283f (rev 02)
00:1c.4 0604: 8086:2847 (rev 02)
00:1d.0 0c03: 8086:2830 (rev 02)
00:1d.1 0c03: 8086:2831 (rev 02)
00:1d.2 0c03: 8086:2832 (rev 02)
00:1d.7 0c03: 8086:2836 (rev 02)
00:1e.0 0604: 8086:244e (rev f2)
00:1f.0 0601: 8086:2810 (rev 02)
00:1f.2 0101: 8086:2820 (rev 02)
00:1f.3 0c05: 8086:283e (rev 02)
00:1f.5 0101: 8086:2825 (rev 02)
03:00.0 0200: 14e4:167a (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
The net-install cd failed, because it couldn't find the CD-Rom drive.
The usb disk install booted, and found the daily iso on the drive, but
neither could detect any disk drives (except the USB drive). I used
today's d-i build for both installs, with no success. I believe that
the ICH8 controller needs 2.6.18 to work. Any idea when d-i will be
available with 2.6.18?
Thanks,
Jason Martens
Reply to: