Bug#346418: Installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian 3.1 r0a i386 (jigdo completed on 21 Aug 2005 from http://ftp.it.debian.org/debian)
uname -a: Linux debianPII 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005 i686 GNU/Linux
Date: 29/12/05
Method: Bootable CD
Machine: Assembled PC
Processor:Pentium II with MMX
Memory:384 MB
Root Device: SCSI /dev/sda
Root Size/partition table:
Disk /dev/sda: 4335 MB, 4335206400 bytes
255 heads, 63 sectors/track, 527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 501 4024251 83 Linux #mounted on /
/dev/sda2 502 527 208845 5 Extended
/dev/sda5 502 527 208813+ 82 Linux swap / Solaris
Output of lspci :
0000:00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)0000:00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
0000:00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)
0000:00:0e.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 04)
0000:00:0f.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
Output of lspci -n:
0000:00:00.0 0600: 8086:7180 (rev 03)
0000:00:01.0 0604: 8086:7181 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 01)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 01)
0000:00:0d.0 0280: 1397:2bd0 (rev 02)
0000:00:0e.0 0200: 8086:1229 (rev 04)
0000:00:0f.0 0100: 9004:7178
0000:01:00.0 0300: 1002:4742 (rev 5c)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Installation completed successfully.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Install logs and other status info is available in /var/log/debian-installer/.
Regards,
Andrea Brenci
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: