Bug#346206: Problem booting on IBM RS6000 7043-B50
데이터텍 wrote:
> Package: installation-reports
>
> Boot method: CD
> Image version: debian-31r1a-powerpc-netinst.iso , 2005-12-24 debian-31r0a-powerpc-netinst.iso , 2005-6-7 Date: Since 2006-1-2 I have been trying installation for IBM RS6000 B50 machine.
>
> Machine: IBM RS6000 7043-B50
> Processor: CHRP
> Memory: 256MB
> Partitions: A new HDD, so no partition yet
>
> Output of console: On the console there is just "OK" on OF
>
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot worked: [E]
> Configure network HW: [ ]
> Config network: [ ]
> Detect CD: [ ]
> Load installer modules: [ ]
> Detect hard drives: [ ]
> Partition hard drives: [ ]
> Create file systems: [ ]
> Mount partitions: [ ]
> Install base system: [ ]
> Install boot loader: [ ]
> Reboot: [ ]
>
> Comments/Problems:
> Hi,We tried booting with every version of CD, v3.0, v3.1 and testing, but failed to boot.When we enter "boot cdron:,\install\yaboot" on OF, we just got "OK" prompt on OF.We are using IBM RS6000 7043-B50, CHRP.We tried with floppy of rescue.bin, there was a loop. And I heard it was a bug, so it was obsoleted by CD-ROM..Friendly,Nobel
Are you using a GXPxxx IBM video board? in this case i suggest you to do
the installation via serial console since Linux does not support that
serie of video boards.
This is the way i had to install debian on my 7043/140, but maybe a
Matrox Mystique board would be ok if the linux kernel boots and fb
support is activated.
ciao
Attilio
Reply to: