Bug#341096: Install Report
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
2005-11-15
http://cdimage.debian.org/pub/cdimage-testing/etch_d-i/amd64/beta1/debian-testing-amd64-netinst.iso
installer build 20051026
uname -a:
Linux beamer2 2.6.12-1-amd64-k8-smp #1 SMP Wed Sep 28 02:57:49 CEST 2005
x86_64 GNU/Linux
Date: 2005-11-15
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Base installation with downloaded 100MB iso image.
The rest has been installed with dselect through a proxied network from
http://amd64.debian.net/debian
Machine: Self-build
Processor: Athlon 64 X2 4200
Memory: 2 x 1024 MB DDR/ECC
Root Device: /dev/hda1
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
hda1 Primary Linux ext3 [/] 10001.95
hda2 Primary Linux ext2 [/var] 5000.98
hda3 Primary Linux ext3 [/data] 140002.50
hda4 Primary Linux swap / Solaris 5033.88
Output of lspci and lspci -n:
Some of the onboard hardware is deactivated in the bios
lspci:
0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation GeForce 6200
TurboCache(TM) (rev a1)
0000:05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
0000:05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13)
lspci -n:
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0050 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:06.0 0101: 10de:0053 (rev f2)
0000:00:07.0 0101: 10de:0054 (rev f3)
0000:00:08.0 0101: 10de:0055 (rev f3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0b.0 0604: 10de:005d (rev a3)
0000:00:0c.0 0604: 10de:005d (rev a3)
0000:00:0d.0 0604: 10de:005d (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0161 (rev a1)
0000:05:0b.0 0c00: 104c:8023
0000:05:0c.0 0200: 11ab:4320 (rev 13)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The network setup worked very fine. Especially the hostname and domainname
detection through dns.
I changed to a smp kernel and got problems with the clock running much
too fast. I found some kernel options in some forums which solved the problem:
notsc no_timer_check
http://groups.google.de/group/linux.debian.ports.x86-64/browse_frm/thread/4aae438ff566835a/d3db60cab325acc6?lnk=st&q=linux+amd+dual+core+clock&rnum=6&hl=de#d3db60cab325acc6
I added two SATA disks configured as RAID 1. After manual
configuration with mdadm the RAID was working like expected. After
reboot it disappeared. I had to add "sata_nv" to /etc/modules
manually to solve this.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
--
Martin Hans targit GmbH
Ridlerstraße 31 b
Tel: +49 89 517397-0 D-80339 München
Fax: +49 89 517397-77 http://www.targit.de
Reply to: