Bug#339667: Package: installation-reports
Package: installation-reports
Debian-installer-version: 2005/11/17 - http://cdimage.debian.org/pub/
cdimage-testing/etch_d-i/powerpc/beta1/debian-testing-powerpc-
netinst.iso
uname -a: Linux powermac 2.6.12-1-powerpc64 #1 SMP Tue Sep 27
15:20:16 UTC 2005 ppc64 unknown
Date: 2005/11/17 - 21:15 GMT+1
Method: Net Install CD Image - install64
Machine: PowerMac7,3 - Power Mac G5
Processor: PowerPC G5 (3.1) - 2x2.7GHz
Memory: 2GB DDR SDRAM (PC3200U-30330)
Root Device: Serial-ATA - 200GB (disk1s3) / 400GB (disk0s3)
Root Size/partition table:
SCSI (0,0,0) (sda) - 200.0 GB ATA ST3200826AS
#1 32.3 kB Apple
134.2 MB FREE SPACE
#3 99.9 GB hfs+ Apple_HFS_Un
#2 1.0 MB Untitled
#2 280.0 MB ext3 Untitled
#2 5.0 GB ext3 Untitled
#2 3.0 GB ext3 Untitled
#2 6.1 GB swap swap swap
#2 400.0 MB ext3 Untitled
#2 85.3 GB ext3 Untitled
SCSI (0,0,0) (sdb) - 400.1 GB ATA Hitachi HDS72404
#1 32.3 kB Apple
134.2 MB FREE SPACE
#3 400.0 GB hfs+ Apple_HFS_Un
8.2 kB FREE SPACE
Output of lspci and lspci -n: Command not found
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [E]
Comments/Problems:
### Network:
dhclient: Listening on LPF/eth0/00:0d:93:64:88
dhclient: Sending on LPF/eth0/00:0d:93:64:88
dhclient: Sending on Socket/fallback/fallback-net
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
Airport Extreme Card doesn't seem to work.
Network Configuration is working when I plug an ethernet cable.
### Yaboot:
yaboot-installer: debug: mapped: /dev/sdb3
kernel: ioctl32(nvsetenv:18409): Unknown cmd fd(7) cmd(20007043){' '}
arg(00000000) on /dev/nvram
yaboot-installer: mkofboot: Finding OpenFirmware device path to '/dev/
sda2'...
yaboot-installer: ofpath: /proc/device-tree is broken. Do not use
BootX to boot, use yaboot.
yaboot-installer: mkofboot: Unable to find OpenFirmware path for
boot=/dev/sda2
yaboot-installer: mkofboot: Please add ofboot=<path> where <path> is
the OpenFirmware path to /dev/sda2 to /etc/yaboot.conf
yaboot-installer: mkofboot: Finding OpenFirmware device path to '/dev/
sdb3'...
yaboot-installer: ofpath: /proc/device-tree is broken. Do not use
BootX to boot, use yaboot.
yaboot-installer: mkofboot: Unable to find OpenFirmware path for
macosx=/dev/sdb3
yaboot-installer: mkofboot: Try specifying the real OpenFirmware path
for macosx=/dev/sdb3 in /etc/yaboot.conf
yaboot-installer: error: mkofboot failed with exit status 1
### Misc:
Unfortunately, I'm not into low-level programming, but I can help, if
needed, by testing on my hardware configuration.
So if you need some kind of tests with such a configuration, don't
hesitate to contact me.
Thanx a lot for your work : )
--
Jean-David Gadina (macmade)
www.gadlab.net - Multimedia Network
Reply to: