[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#338774: Testing Installation Report



Package: installation-reports

Debian-installer-version: 11-11-2005 Downloaded from 
http://www.us.debian.org/devel/debian-installer/
uname -a: Linux mercury 2.6.12-1-386 #1 Tue Sep 27
12:41:08 JST 2005 i686 GNU/Linux
Date: 11-11-2005 11:30 AM
Method: Installed via bootable network install CD
image

Machine: HP Vectra VL
Processor: Intel Pentium III 650E
Memory: 256 MB
Root Device: IDE ST39140A Seagate Medalist Pro 9140
(9.12 GB)
Root Size/partition table: 
Filesystem           1K-blocks      Used Available
Use% Mounted on
/dev/hda1              2474572    519028   1829840 
23% /
/dev/hda6              5969124    131272   5534628  
3% /home
tmpfs                   128360         0    128360  
0% /dev/shm

Output of lspci and lspci -n:

lspci:
0000:00:00.0 Host bridge: Intel Corporation
440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX
- 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:04.0 ISA bridge: Intel Corporation
82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corporation
82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corporation
82371AB/EB/MB PIIX4 USB 
(rev 01)
0000:00:04.3 Bridge: Intel Corporation 82371AB/EB/MB
PIIX4 ACPI (rev 
02)
0000:00:06.0 Multimedia audio controller: Cirrus Logic
CS 4614/22/24 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
0000:00:0b.0 Ethernet controller: 3Com Corporation
3c905B 100BaseTX 
[Cyclone] (rev 30)
0000:01:00.0 VGA compatible controller: Matrox
Graphics, Inc. MGA G200 AGP (rev 03)

lspci -n:
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:06.0 0401: 1013:6003 (rev 01)
0000:00:0b.0 0200: 10b7:9055 (rev 30)
0000:01:00.0 0300: 102b:0521 (rev 03)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] =
didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Installation was identical to a stable sarge
installation performed
on the same machine two months prior.


		
__________________________________ 
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com



Reply to: