Bug#338643: installation report
Package: installation-reports
Debian-installer-version: 2005-11-07 debian-testing-powerpc-binary-1.iso from cdimage.debian
uname -a: Linux (none) 2.6.12-1-powerpc64 #1 SMP Tue Sep 27 15:20:16 UTC 2005 ppc64 unknown
Date: 2005 11 10/11
Method:
install, from local CD
Machine: Powermac G5
Processor: single 1.8
Memory: 1.25GB
Root Device: sda6
Root Size/partition table: N/A
Output of lspci and lspci -n:
lspci (from a gentoo install CD - of course, that can't install either)
0000:f0:0b.0 Host bridge: Apple Computer Inc. U3L AGP Bridge
0000:f0:10.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200 Ultra] (rev a1)
0001:00:01.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:02.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:03.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:01:07.0 Class ff00: Apple Computer Inc. Shasta Mac I/O
0001:01:0b.0 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.1 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.2 USB Controller: NEC Corporation USB (rev 43)
0001:02:0c.0 IDE interface: Broadcom (formerly ServerWorks) K2 SATA
0001:02:0d.0 Class ff00: Apple Computer Inc. Shasta IDE
0001:02:0e.0 Firewire (IEEE 1394): Apple Computer Inc. Shasta Firewire
0001:03:0f.0 Ethernet controller: Apple Computer Inc. Shasta (Sun GEM)
lspci -n
0000:f0:0b.0 Class 0600: 106b:0058
0000:f0:10.0 Class 0300: 10de:0321 (rev a1)
0001:00:01.0 Class 0604: 106b:0053
0001:00:02.0 Class 0604: 106b:0054
0001:00:03.0 Class 0604: 106b:0055
0001:01:07.0 Class ff00: 106b:004f
0001:01:0b.0 Class 0c03: 1033:0035 (rev 43)
0001:01:0b.1 Class 0c03: 1033:0035 (rev 43)
0001:01:0b.2 Class 0c03: 1033:00e0 (rev 04)
0001:02:0c.0 Class 0101: 1166:0240
0001:02:0d.0 Class ff00: 106b:0050
0001:02:0e.0 Class 0c00: 106b:0052
0001:03:0f.0 Class 0200: 106b:0051
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [ ]
Comments/Problems:
(The network hardware appeared to be configured, but it couldn't get
a dhcp lease or contact a mirror, and my other boxes couldn't ping it.
According to BenH, my PHY needs a 2.6.14 kernel, which is why I tried
the "full" CD)
Yaboot-installer fails to detect the OF pathes for /dev/sda2 (bootstrap)
and /dev/sda3 (os) and declines to install.
yaboot-installer: info: probed: /dev/discs/disc0/part3:Mac OS X:MacOSX:macosx
yaboot-installer: debug: mapped: /dev/sda3
kernel: ioctl32(nvsetenv:3998): Unknown cmd fd(7) cmd(20007043){' '} arg(00000000) on /dev/nvram
yaboot-installer: mkofboot: Finding OpenFirmware device path to `/dev/sda2'...
yaboot-installer: ofpath: /proc/device-tree is broken. Do not use BootX to boot, use yaboot.
yaboot-installer: ofpath: The yaboot HOWTO can be found here: http://www.alaska.net/~erbenson/doc
yaboot-installer: mkofboot: Unable to find OpenFirmware path for boot=/dev/sda2
yaboot-installer: mkofboot: Please add ofboot=<path> where <path> is the OpenFirmware path to /dev/sda2 to /etc/yaboot.conf
[...snip similar for /dev/sda3...]
yaboot-installer: mkofboot: Try specifying the real OpenFirmware path for macos=/dev/sda3 in /etc/yaboot.conf
yaboot-installer: error: mkofboot failed with exit status 1
--
das eine Mal als Tragödie, das andere Mal als Farce
Reply to: