Bug#338588: Installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image>
uname -a: Linux gatekeeper2 2.6.8-2-686 #1 Thu May 19 17:53:30 JST 2005
i686 GNU/Linux
Date: 8. 11. 2005
Method: CD
Machine: IBM 315
Processor: PENTIUM PRO 200 Mhz
Memory: 187 MB
Root Device: /dev/md0 - RAID 1
Root Size/partition table:
Disk /dev/sda: 2164 MB, 2164083200 bytes
255 heads, 63 sectors/track, 263 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 263 2112516 fd Linux raid
autodetect
Disk /dev/sdb: 2164 MB, 2164083200 bytes
255 heads, 63 sectors/track, 263 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 263 2112516 fd Linux raid
autodetect
Disk /dev/sdc: 9139 MB, 9139200000 bytes
255 heads, 63 sectors/track, 1111 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 33 265041 82 Linux swap / Solaris
/dev/sdc2 34 1111 8659035 83 Linux
Disk /dev/md0: 2163 MB, 2163146752 bytes
2 heads, 4 sectors/track, 528112 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
0000:00:01.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton
II] (rev 01)
0000:00:01.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
0000:00:01.2 USB Controller: Intel Corp. 82371SB PIIX3 USB
[Natoma/Triton II] (rev 01)
0000:00:02.0 PCI bridge: Digital Equipment Corporation DECchip 21152
(rev 02)
0000:00:0f.0 VGA compatible controller: S3 Inc. 86c764/765
[Trio32/64/64V+] (rev 54)
0000:00:10.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 30)
0000:01:01.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
0000:01:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 02)
0000:00:00.0 0600: 8086:1237 (rev 02)
0000:00:01.0 0601: 8086:7000 (rev 01)
0000:00:01.1 0101: 8086:7010
0000:00:01.2 0c03: 8086:7020 (rev 01)
0000:00:02.0 0604: 1011:0024 (rev 02)
0000:00:0f.0 0300: 5333:8811 (rev 54)
0000:00:10.0 0200: 10b7:9055 (rev 30)
0000:01:01.0 0100: 9004:8178
0000:01:02.0 0200: 8086:1229 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: