Bug#332254: netboot: __kbdreset failed
Package: installation-reports
Debian-installer-version: downloaded on oct 30 2005 from
http://people.debian.org/~luther/d-i/images/daily/powerpc/netboot/vmlinuz-prep.initrd
Date: oct 30 2005
Method: network from a PC running Sarge on the same subnet
Machine: MVME2302>
Processor: PPC603 or 604 (I don't know)
Memory: 32M
Root Device: nfs
Root Size/partition table:
Output of lspci and lspci -n:
Base System Installation Checklist: [E]
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Installer won't boot:
hangs after printing "__kbdreset failed: 00000001"
----------------------------------------------------------------
- I want to install Sarge diskless. The board runs fine an old -
- Potato from an scsi disk, but I don't want to touch the disk -
- Thanks for your help. -
- Here is the log: -
----------------------------------------------------------------
Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&5517847, Bytes Loaded =&5517847
Bytes/Second =&1103569, Elapsed Time =5 Second(s)
Residual-Data Located at: $01F88000
loaded at: 00005400 0054FFF4
relocated to: 00800000 00D4ABF4
zimage at: 0080A94C 0093E5DA
initrd at: 0093F000 00D40C64
avail ram: 00400000 00800000
__kbdreset failed: 00000001
Reply to: