Bug#314594: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/debian-cd/3.1_r0a/powerpc/iso-cd/debian-31r0a-powerpc-netinst.iso
uname -a:
Linux imac 2.6.8-powerpc #1 Sun Mar 20 14:09:41 CET 2005 ppc GNU/Linux
Date: June 16. 2005
Method: How did you install? CD-Rom Boot from burned CD-Rom from debian-31r0a-powerpc-netinst.iso
If network install, from where? : ftp.de.debian.org
Machine: Macintosh iMac G3 500 Graphite
Processor:PowerPC 500MHz
Memory: 384MB
Root Device: IDE
Root Size/partition table:
fdisk /dev/hda
p
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Driver43 Macintosh 54 @ 64 ( 27.0k) Driver 4.3
/dev/hda3 Apple_Driver43 Macintosh 74 @ 118 ( 37.0k) Driver 4.3
/dev/hda4 Apple_Driver_ATA Macintosh 54 @ 192 ( 27.0k) Unknown
/dev/hda5 Apple_Driver_ATA Macintosh 74 @ 246 ( 37.0k) Unknown
/dev/hda6 Apple_FWDriver Macintosh 200 @ 320 (100.0k) Unknown
/dev/hda7 Apple_Driver_IOKit Macintosh 512 @ 520 (256.0k) Unknown
/dev/hda8 Apple_Patches Patch Partition 512 @ 1032 (256.0k) Unknown
/dev/hda9 Apple_Bootstrap untitled 1954 @ 1544 (977.0k) NewWorld bootblock
/dev/hda10 Apple_UNIX_SVR2 untitled 20355469 @ 3498 ( 9.7G) Linux native
/dev/hda11 Apple_HFS Ohne Titel 3 37378942 @ 21301756 ( 17.8G) HFS
/dev/hda12 Apple_UNIX_SVR2 swap 942789 @ 20358967 (460.3M) Linux swap
/dev/hda13 Apple_Free Extra 22 @ 58680698 ( 11.0k) Free space
df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda10 10017916 2042524 7466508 22% /
tmpfs 192888 0 192888 0% /dev/shm
tmpfs 10240 580 9660 6% /dev
cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda10 / ext3 defaults,errors=remount-ro 0 1
/dev/hda12 none swap sw 0 0
/dev/hdb /media/cdrom0 iso9660 ro,user,noauto 0 0
Output of lspci and lspci -n:
lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 Display controller: ATI Technologies Inc Rage 128 PR/PRO AGP 4x TMDS
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:17.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth FireWire (rev 01)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01)
lspci -n
0000:00:0b.0 0600: 106b:0020
0000:00:10.0 0380: 1002:5052
0001:10:0b.0 0600: 106b:001f
0001:10:17.0 ff00: 106b:0022 (rev 03)
0001:10:18.0 0c03: 106b:0019
0001:10:19.0 0c03: 106b:0019
0002:20:0b.0 0600: 106b:001e
0002:20:0e.0 0c00: 106b:0018 (rev 01)
0002:20:0f.0 0200: 106b:0021 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I installled Desktop Task, it included gdm-package. I had miss-configuration for X. After install I can not login (X & gdm did not start.)
To make XF86Config-4 is also difficult. It is always better, that installer have a pair of template for XF86Config-4 for most saled Macintosh.
Here is my XF86Config-4
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Files"
# # The location of the RGB database. Note, this is the name of the
# # file minus the extension (like ".txt" or ".db"). There is normally
# # no need to change the default.
# #RgbPath "/usr/X11R6/lib/X11/rgb"
# # Multiple FontPath entries are allowed (they are concatenated together)
# # By default, Red Hat 6.0 and later now use a font server independent of
# # the X server to render fonts.
# FontPath "unix/:7100"
#EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
#Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
#Option"AutoRepeat""500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Option"Protocol""Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Option"Xleds""1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#Option"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
#Option"XkbModel""pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#Option"XkbModel""microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#Option"XkbLayout""de"
# or:
#Option"XkbLayout""de"
#Option"XkbVariant""nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#Option"XkbOptions""ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "is"
#Option"XkbVariant"""
#Option"XkbOptions"""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 60.015
VertRefresh 75-117
Option "dpms"
EndSection
Section "Device"
Identifier "ATI Rage 128 (generic)"
Option "UseFBDev"
Driver "r128"
VendorName "ATI Rage 128 (generic)"
BoardName "ATI Rage 128 (generic)"
BusID "PCI:00:16:00"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Rage 128 (generic)"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
Reply to: