Bug#299529: installation-reports: Installation on poweredge 750 succesful
Package: installation-reports
Version: installation-reports
Severity: normal
INSTALL REPORT
Debian-installer-version: 2005-03-14, daily netinst.iso from Alioth.
uname -a: kernel-image-2.6.8-2-386
Date: 2005-03-14, 16:00
Method: Installed from USB key: booted from it, installed to a SATA disk,
no tasks selected, bare system.
Machine: Poweredge 750
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory: 1 GB
Root Device: SATA (SCSI device), /dev/sda
Root Size/partition table:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda8 222968776 93680 211548872 1% /
tmpfs 517416 0 517416 0% /dev/shm
/dev/sda1 52659 13532 36322 28% /boot
/dev/sda7 4814936 33516 4536832 1% /tmp
/dev/sda5 4814936 340912 4229436 8% /usr
/dev/sda6 4814936 164880 4405468 4% /var
tmpfs 65536 0 65536 0% /var/lib/php4
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02)
0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a)
0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
0000:01:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet Controller
0000:03:02.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller
0000:03:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:03.0 0604: 8086:257b (rev 02)
0000:00:1c.0 0604: 8086:25ae (rev 02)
0000:00:1d.0 0c03: 8086:25a9 (rev 02)
0000:00:1d.1 0c03: 8086:25aa (rev 02)
0000:00:1d.4 0880: 8086:25ab (rev 02)
0000:00:1d.5 0800: 8086:25ac (rev 02)
0000:00:1d.7 0c03: 8086:25ad (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 0a)
0000:00:1f.0 0601: 8086:25a1 (rev 02)
0000:00:1f.2 0101: 8086:25a3 (rev 02)
0000:00:1f.3 0c05: 8086:25a4 (rev 02)
0000:01:01.0 0200: 8086:1075
0000:03:02.0 0200: 8086:1076
0000:03:0e.0 0300: 1002:4752 (rev 27)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Worked like a charm! Please release soon, the debian beta installer
web page is confusing if you try to choose installation media now.
Please also add a note on how to create an usb key with DOS tools only.
It's pretty trivial if you have a Linux workstation, but now I had to
find a Knoppix CD first ;)
Good job. Much better than Woody.
PS: Please, please provide a "badblocks" binary, otherwise using the
installer as a rescue disk is pretty useless in many cases.
PPS: The openssh-client udeb is fantastic.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-ac10-byte
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Reply to: