[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#299490: Package: installation-reports



Package: installation-reports

Debian-installer-version: rc2 netinst
uname -a: Linux styx 2.6.8-2-k7 #1 Mon Jan 24 03:29:52 EST 2005 i686GNU/Linux
Date: 07.03.2005
Method: Install from bootable netinst CD, installed from ftp.uni-kl.de, no proxy

Machine: 
Processor: AMD Athlon, 700 MHz
Memory: 386756k
Root Device: IDE
Root Size/partition table:
/dev/hda1   *           1       20321    10241406    7  HPFS/NTFS
/dev/hda2           20322       30008     4882248   83  Linux
/dev/hda3           30009       31946      976752   82  Linux swap

Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25)
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01)
0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 1b)
0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e)
0000:00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e)
0000:00:04.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 20)
0000:00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev08)
0000:00:11.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev04)

lspci -n
0000:00:00.0 0600: 1022:7006 (rev 25)
0000:00:01.0 0604: 1022:7007 (rev 01)
0000:00:04.0 0601: 1106:0686 (rev 1b)
0000:00:04.1 0101: 1106:0571 (rev 06)
0000:00:04.2 0c03: 1106:3038 (rev 0e)
0000:00:04.3 0c03: 1106:3038 (rev 0e)
0000:00:04.4 0c05: 1106:3057 (rev 20)
0000:00:0f.0 0200: 8086:1229 (rev 08)
0000:00:11.0 0401: 1274:5880 (rev 02)
0000:01:05.0 0300: 102b:0525 (rev 04)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

There were no problems at all. Everything worked out of the box.



Reply to: