Bug#299268: Netwinder latest daily success
Package: installation-reports
Possibly a followup to #253789, sorry for the long delay, I had to
fix the board.
Debian-installer-version: Sat, 12 Mar 21:10 EST 2005
http://people.debian.org/~kmuto/d-i/images/daily/netwinder/netboot/boot.img
uname -a: Linux barad-dur 2.4.27-netwinder #1 Tue Feb 22 15:24:37 GMT 2005 armv4l GNU/Linux
Date: Sat Mar 12 22:55:51 EST 2005
Method: Network booted from local DHCP server. Serial console.
Machine: Rebel Netwinder
Processor:
kyle@barad-dur:~% cat /proc/cpuinfo
Processor : StrongARM-110 rev 4 (v4l)
BogoMIPS : 185.95
Features : swp half 26bit fastmult
Hardware : Rebel-NetWinder
Revision : 58ff
Serial : 0000000000001e0e
Memory: 64MB
Root Device: 2.2GB IDE
Root Size/partition table:
Disk /dev/hda: 2167 MB, 2167603200 bytes
255 heads, 63 sectors/track, 263 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 11 88326 83 Linux /boot
/dev/hda2 12 25 112455 83 Linux /
/dev/hda3 26 263 1911735 5 Extended
/dev/hda4 1 1 0 0 Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(0, 0, 0) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
phys=(0, 0, 0) logical=(267349, 89, 4)
Partition 4 does not end on cylinder boundary.
/dev/hda5 26 128 827316 83 Linux /usr
/dev/hda6 129 160 257008+ 83 Linux /var
/dev/hda7 161 175 120456 82 Linux swap
/dev/hda8 176 182 56196 83 Linux /tmp
/dev/hda9 183 263 650601 83 Linux /home
Output of lspci and lspci -n:
kyle@barad-dur:~% lspci
0000:00:00.0 Co-processor: Digital Equipment Corporation StrongARM DC21285 (rev 03)
0000:00:09.0 VGA compatible controller: Intergraphics Systems CyberPro 2000A (rev 01)
0000:00:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
0000:00:0c.0 ISA bridge: Symphony Labs W83C553 (rev 10)
0000:00:0c.1 IDE interface: Symphony Labs SL82c105 (rev 05)
0000:00:0d.0 Ethernet controller: Winbond Electronics Corp W89C940F
kyle@barad-dur:~% lspci -n
0000:00:00.0 0b40: 1011:1065 (rev 03)
0000:00:09.0 0300: 10ea:2010 (rev 01)
0000:00:0a.0 0200: 1011:0019 (rev 41)
0000:00:0c.0 0601: 10ad:0565 (rev 10)
0000:00:0c.1 0101: 10ad:0105 (rev 05)
0000:00:0d.0 0200: 1050:5a5a
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O] (see below)
Create file systems: [O]
Mount partitions: [O]
Install base system: [O] (network failed once, and retried)
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Most of this will, I guess, apply to sarge+1...
I guess detect cd was fine, since it detected that I don't have one.
Chose "multiuser system" and it partitioned things well.
/boot was correctly ext2r0, excellent!
Was necessary to:
setenv cmdappend console=ttyS0,115200,8n1
setenv rootdev /dev/ram
to get a serial console, and get the initrd going.
Very awesome that the NeTTROM settings are spewed at the end, very
very helpful!
Seemed to "hang" a bit at "Configuring the base system" before
the "Debian Configuration" menus, some feedback would be nice, as these
are very slow machines. Maybe a whirlygig would be appropriate...
Thanks!
Kyle
Reply to: