Bug#298596: Debian Installation Report
Package: installation-reports
Debian-installer-version: 2005-03-08
uname -a: Linux gw 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: Tue Mar 8 12:25:26 CET 2005
Method: Boot on CD, installation over FTP from ftp.du.se
Machine: IBM 300PL
Processor: Pentium III 664 MHz
Memory: 378 MB
Root Device: IDE, /dev/hda1
Root Size/partition table:
Name Flags Part Type FS Type [Label] Size (MB)
------------------------------------------------------------------
hda1 Boot Primary Linux ext3 [/] 12988.08
hda5 Logical Linux swap 590.42
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 82820 820 (Camino) Chipset Host Bridge
(MCH) (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82820 820 (Camino) Chipset AGP Bridge
(rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev
02)
0000:01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 03)
0000:02:04.0 Ethernet controller: Standard Microsystems Corp [SMC] 83c170
EPIC/100 Fast Ethernet Adapter (rev 06)
0000:02:05.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
# lspci -n
0000:00:00.0 0600: 8086:2501 (rev 03)
0000:00:01.0 0604: 8086:250f (rev 03)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.3 0c05: 8086:2413 (rev 02)
0000:00:1f.5 0401: 8086:2415 (rev 02)
0000:01:00.0 0300: 5333:8a22 (rev 03)
0000:02:04.0 0200: 10b8:0005 (rev 06)
0000:02:05.0 0200: 11ad:0002 (rev 20)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I think you should have more information at the partition part of the process.
Except that it worked great.
Reply to: