Bug#295323: Debian-installer
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-netinst.iso 15/02-2005
uname -a: Linux neumann 2.6.8-2-686-smp #1 SMP Mon Jan 24 02:32:52 EST 2005 i686 GNU/Linux
Date: 15/02-2005 02:30 GMT+1
Method: netinstall, plus I got a driver for the scsi raid controller which I insmod'd
Machine: IBM PC-Server 330
Processor: SMP Pentium II 223 mhz
Memory: 512 mb EDO
Root Device: scsi /dev/sda
Root Size/partition table:
Output of lspci and lspci -n:
neumann:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
0000:00:07.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54)
0000:00:0b.0 PCI bridge: IBM IBM27-82351 (rev 01)
0000:00:13.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
0000:00:13.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
0000:00:13.2 USB Controller: Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II] (rev 01)
0000:01:03.0 SCSI storage controller: IBM SCSI RAID Adapter [ServeRAID] (rev 03)
0000:01:04.0 SCSI storage controller: Adaptec AIC-7880U
0000:01:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 25)
0000:01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
neumann:~# lspci -n
0000:00:00.0 0600: 8086:1237 (rev 02)
0000:00:07.0 0300: 5333:8811 (rev 54)
0000:00:0b.0 0604: 1014:0022 (rev 01)
0000:00:13.0 0601: 8086:7000 (rev 01)
0000:00:13.1 0101: 8086:7010
0000:00:13.2 0c03: 8086:7020 (rev 01)
0000:01:03.0 0100: 1014:002e (rev 03)
0000:01:04.0 0100: 9004:8078
0000:01:05.0 0200: 1022:2000 (rev 25)
0000:01:07.0 0200: 10ec:8169 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O ]
Configure network HW: [O ]
Config network: [O ]
Detect CD: [E ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Create file systems: [O ]
Mount partitions: [O ]
Install base system: [O ]
Install boot loader: [O ]
Reboot: [O ]
Comments/Problems:
I have a SCSI cdrom drive, which is located on the IBM ServeRaid controller (ips.ko), this module doesnt get loaded during the detection of the cdr's,
I loaded it manually with insmod.
I tried booting the 2.4 version aswell, because I had the ips.o module on a boot floppy, but the 2.4 installer doesnt ask if you want to load modules
from a floppy, (the 2.6 does)
Regards
-
------------------
Per Christiansen
Programmer and Network Coordinator
http://www.webinc.dk
PGP Key fingerprint = E83E E5A9 CE51 B5D9 7F82 1842 5D52 BA70 9452 2CEC
RSA2 Key fingerprint = 2b:c7:3c:6e:53:62:80:72:65:8a:c1:a9:86:c2:57:0c
begin:vcard
fn:Per Christiansen
n:Christiansen;Per
org:Webint
adr:;;Oesterbro 62, st.tv.;Aalborg;;9000;Denmark
email;internet:hamselv@webinc.dk
title:CEO
tel;work:+45 21459504
tel;home:+45 98131582
tel;cell:+45 21459504
x-mozilla-html:TRUE
url:http://www.webinc.dk
version:2.1
end:vcard
Reply to: