Bug#292748: Debian Installer Report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: netinstall daily build 01/22/2005
uname -a: Linux test 2.6.8-2-386 #1 Sat Jan 8 14:46:01 EST 2005 i686
GNU/Linux
Date: 01/28/2005 21:50
Method: sarge-i386-netinst.iso written on CD, booting from ATAPI-CDROM
Machine: Selfmade
Processor: AMD Duron 900
Memory: 192 MB
Root Device: IDE, /dev/hdb1
Root Size/partition table:
Disk /dev/hdb: 10.0 GB, 10005037056 bytes
16 heads, 63 sectors/track, 19386 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 5435 2739208+ 83 Linux
/dev/hdb2 5436 19386 7031304 f W95 Ext'd (LBA)
/dev/hdb5 5436 6119 344704+ 82 Linux swap
/dev/hdb6 6120 19386 6686536+ 83 Linux
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
0000:00:0d.0 Non-VGA unclassified device: LSI Logic / Symbios Logic 53c810
(rev 01)
0000:00:0f.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood
Plus DVD Decoder (rev 02)
0000:00:11.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 43)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP
(rev 01)
0000:00:00.0 0600: 1106:0305 (rev 03)
0000:00:01.0 0604: 1106:8305
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 1a)
0000:00:07.3 0c03: 1106:3038 (rev 1a)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:0d.0 0000: 1000:0001 (rev 01)
0000:00:0f.0 0480: 1105:8300 (rev 02)
0000:00:11.0 0200: 1106:3065 (rev 43)
0000:01:00.0 0300: 102b:2527 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
It works great! I have tested a while ago rc1 and had problems installing
grub when partitioning by hand. Now everything works very well and so quick!
Thanks!
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: