Bug#280322: debian install report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian-install sarge pre-rc2
uname -a: Linux athens 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux
Date: Mon Oct 25 06:30:43 2004
Method: Internet install from ftp.us.debian.org, CD media
Machine: Custom built i686-based machine
Processor: Intel Pentium4 2.8GHz
Memory: 512MHz
Root Device: IDE/RAID, 2 WD800JB-00JJA0 HDs
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Device Boot Start End Blocks Id System
/dev/hda1 * 1 969 488344+ fd Linux raid autodetect
/dev/hda2 970 2907 976752 fd Linux raid autodetect
/dev/hda3 2908 155061 76685616 fd Linux raid autodetect
/dev/hda1 and /dev/hdc2 ==> /dev/md0 mounted as /
/dev/hda2 and /dev/hdc2 ==> /dev/md1 mounted as swap
/dev/hda3 and /dev/hdc3 ==> /dev/md2 in a LVM array as follows:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/raidvg-homelv
10321208 2568832 7228088 27% /home
/dev/mapper/raidvg-usrlv
7740888 1899120 5448552 26% /usr
/dev/mapper/raidvg-locallv
1965459 336682 1523920 19% /usr/local
/dev/mapper/raidvg-varlv
3612384 526212 2902672 16% /var
/dev/mapper/raidvg-medialv
52538304 40758332 11779972 78% /var/media
Output of lspci and lspci -n:
athens:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:00.0 Multimedia video controller: Auravision VxP524
0000:01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet Controller (rev 81)
athens:~# lspci -n
0000:00:00.0 0600: 8086:2560 (rev 01)
0000:00:02.0 0300: 8086:2562 (rev 01)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:244e (rev 81)
0000:00:1f.0 0601: 8086:24c0 (rev 01)
0000:00:1f.1 0101: 8086:24cb (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:01:00.0 0400: 11d1:01f7
0000:01:02.0 0200: 10ec:8139 (rev 10)
0000:01:08.0 0200: 8086:1039 (rev 81)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [E]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Attempted to create LVM devices on top of RAID. Configuring as RAID
and creating the RAID devices went fine. However, taking RAID
device /dev/md2 and specifying it as a LVM filesystem, then
attempting to configure it for LVM, returned 0 devices available
for configuration and no volume groups found. Had to manually
prepare the device by running the following in the shell: pvcreate
/dev/md0, vgcreate raidvg /dev/md0, vgchange -a y raidvg. After I did
that, I was able to do the configuration of the LVM device inside of the
installer and the install continued properly after that; interface for
configuring both RAID and LVM were very nice. Experienced no other
problems with the installer or the install.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: