[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#250861: installing base system fails with sarge-i386-businesscard.iso beta4



Package: installation-reports
Version: sarge-i386-businesscard.iso beta4

Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-businesscard.iso
        from: http://www.de.debian.org/devel/debian-installer/
uname -a: Linux dick 2.4.25-1-1386 #2 Wed Apr 14 19:38:08 EST 2004 i686 unknown
Date: 2004-05-25 a.m. (also 2004-05-24 p.m.)
Method: 
        boot with sarge bussinesscard
        packages from ftp.de.debian.org (also ftp.leo.org)
        no proxy
Machine: Siemens Nixdorf Scenic Pro D6 233
Processor: PII 233
Memory:    128 MB
Root Device: IBM IC35L018UWD210-0 @ LSI Logic Symbios SYM21002
Root Size/partition table: 
    #1 prim  30.3MB ext2 /boot
    #2 prim 255.8MB swap swap
    #3 prim 299.8MB ext3 /
   #10 logi   1.2GB ext3 /usr
    #5 logi 500.1MB xfs  /var
    #6 logi   4.0GB xfs  /var/spool
    #7 logi   4.0GB xfs  /home
    #8 logi   4.0GB xfs  /backup
    #9 logi   4.0GB xfs  /tmp

Output of lspci:
  <not available>
  vga:  Matrox MGA 1064 SG rev 3 (PCI)
  intel 82443LX/EX host bridge
  eth0: DECchip 21142/3 rev 65
  intel 82371AB/EB/MB
  SCSI: LSI logic 53c896 rev 7 (2x)
  CDRW/DVD: Samsung SM-332B 

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [E]
Install boot loader:    [ ]
Reboot:                 [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

Hello,

I tried a network installation with booting from the bussinesscard.
Everthing worked fine up to 'installing the base system'.
A lot of packages where loaded and installed, but see:

interesting messages from /var/log/messages:
| pvscan -- LVM driver/module not loaded?
| vgscan -- LVM driver/module not loaded?
| modprobe: failed to load module floppy               [comment: with and without floppy installed]
| [...]
| E: Cannot get debconf version. Is debconf installed? [comment: debconf-[gs]et are there]
| [...]
| Need to get [...] of archives.
| [...]
| Err http://debootstrap.invalid sarge/main libreadline4 4.3-10
|   Could not resolve 'debootstrap.invalid'
| [also for package xfsprogs 2.6.11-1]
| Failed to fetch http://debootstrap.invalid/pool/main/r/readline4/libreadline4_4.3-10_i386.deb Could | not resolve 'debootstrap.invalid'
| [also for package xfsprogs 2.6.11-1]
| E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?  [comment: there is no apt-get at this time]
| umount: /target/dev/pts: No such file or directory
| umount: /target/dev/shm: No such file or directory
| umount: /target/dev/bus/usb: Invalid argument

I hope I didn't overlook a hint in the docu / bugtracking.

Maybe you have some ideas or I hope this error-report will help.

Greets
Jürgen

--
Juergen Mayer            | MultiSys GmbH                                . 
Fon: +49-731-140073-24   | Eberhard-Finckh-Str. 18-20
Fax: +49-731-140073-99   | 89075 Ulm * Germany
mailto:jm@multisys.de    | http://www.multisys.de/




Reply to: